![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
FRDM-K64F, Avnet M14A2A, Grove Shield, to create smart home system. In use with AT&Ts M2x & Flow.
Dependencies: mbed FXOS8700CQ MODSERIAL
config_me.h
- Committer:
- fkellermavnet
- Date:
- 2016-07-13
- Revision:
- 21:d0038d14ee7c
- Parent:
- 13:df9c49662797
- Child:
- 23:d6ceeb6d85ed
File content as of revision 21:d0038d14ee7c:
#ifndef __CONFIG_ME_H_ #define __CONFIG_ME_H_ // User must set these for own context: // This is the server's base URL name. Example "www.google.com" static const char * MY_SERVER_URL = "run-west.att.io"; // These are FLOW variables that must be read from your own FLOW account and placed here: #define FLOW_BASE_URL "/1e464b19cdcde/774c88d68202/86694923d5bf28a/in/flow" #define FLOW_INPUT_NAME "/climate" // This in most cases should be left alone but is here if you want to talk a differnet protocol: #define FLOW_URL_TYPE " HTTP/1.1\r\nHost: " // This just needs to be a unique identifier 1 for each board that talks to each FLOW account. // If you only have one board then you can just leave this alone but you have to use this // identifier in your FLOW setup for identification. #define FLOW_DEVICE_NAME "vstarterkit001" // These are for? #define TEMP_HUMIDITY_ONLY 1 #define TEMP_HUMIDITY_ACCELEROMETER 2 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 3 // This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit: static const char * MY_APN_STR = "m2m.com.attz"; //This is for normal HTTP. If you want to use TCP to a specific port, change that here: static const char * MY_PORT_STR = "80"; #endif