History

Added drive board UID and ADC->resistance calibration constants default tip

2019-09-19, by justinbuckland [Thu, 19 Sep 2019 16:19:37 +0000] rev 18

Added drive board UID and ADC->resistance calibration constants

Added board UID and ADC->Resistance calibration constants

2019-09-19, by justinbuckland [Thu, 19 Sep 2019 16:15:06 +0000] rev 17

Added board UID and ADC->Resistance calibration constants

Initial version, logs I, V, R every 5s with non-simultaneous drive of both heaters

2019-09-13, by justinbuckland [Fri, 13 Sep 2019 10:29:44 +0000] rev 16

Initial version, logs I, V, R every 5s with non-simultaneous drive of both heaters

Change MEAS_DELAY to 50us to match thermocycling control program

2019-08-05, by justinbuckland [Mon, 05 Aug 2019 17:36:42 +0000] rev 15

Change MEAS_DELAY to 50us to match thermocycling control program

MEMS-PCR AD logging with camera trigger

2019-08-05, by sophiemeredith [Mon, 05 Aug 2019 17:19:21 +0000] rev 14

MEMS-PCR AD logging with camera trigger

AD logging with camera trigger;

2019-06-28, by sophiemeredith [Fri, 28 Jun 2019 09:57:13 +0000] rev 13

AD logging with camera trigger;

AD updated with camera trigger; ; ;

2019-06-28, by sophiemeredith [Fri, 28 Jun 2019 08:51:48 +0000] rev 12

AD updated with camera trigger; ; ;

Updated AD logging with camera trigger;

2019-06-28, by sophiemeredith [Fri, 28 Jun 2019 08:45:27 +0000] rev 11

Updated AD logging with camera trigger;

Updated AD logging program with camera trigger;

2019-06-28, by sophiemeredith [Fri, 28 Jun 2019 08:23:36 +0000] rev 10

Updated AD logging program with camera trigger;

Updated:; Drive-on to measure: MEAS_DELAY and; Time between measurements: LOG_INTERVAL definitions

2019-06-26, by justinbuckland [Wed, 26 Jun 2019 08:55:30 +0000] rev 9

Updated:; Drive-on to measure: MEAS_DELAY and; Time between measurements: LOG_INTERVAL definitions