Joshua Slater
Test for peripheral device B, iBeacon
Dependencies: BLE_API mbed nRF51822
Revision 0:e492c28cdf42, committed 2015-07-23
- Comitter:
- jslater8
- Date:
- Thu Jul 23 10:09:45 2015 +0000
- Commit message:
- Initial commit
Changed in this revision
diff -r 000000000000 -r e492c28cdf42 BLE_API.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API.lib Thu Jul 23 10:09:45 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#9f4251b3355c
diff -r 000000000000 -r e492c28cdf42 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Jul 23 10:09:45 2015 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "BLE.h"
+#define DUMP_ADV_DATA 0
+
+#define BLE_CHECK(X) (X == BLE_ERROR_NONE) ? (printf("{{success}}\r\n")) : printf("{{failure}} %s at line %u\r\n", #X, __LINE__);
+#define BLE_EQUAL(X,Y) ((X)==(Y)) ? (printf("{{sucess}}\n")) : printf("{{failure}}\n");
+
+BLE ble;
+uint8_t address[6];
+DigitalOut myled(p21);
+Ticker tick;
+
+
+
+void advertisementCallback(const Gap::AdvertisementCallbackParams_t *params) {
+ for (int i = 0; i < 5; i++){
+ if(address[i] != params->peerAddr[i]){
+ return;
+ }
+ }
+ printf("ScanResp: %u, Data: %d\r\n", params->isScanResponse, *(params->advertisingData + params->advertisingDataLen -1));
+// printf("Adv peerAddr: [%02x %02x %02x %02x %02x %02x] rssi %d, ScanResp: %u, AdvType: %u, Data: %d\r\n",
+// params->peerAddr[5], params->peerAddr[4], params->peerAddr[3], params->peerAddr[2], params->peerAddr[1], params->peerAddr[0],
+// params->rssi, params->isScanResponse, params->type, *(params->advertisingData + params->advertisingDataLen -1));
+
+// printf("Adv peerAddr: [%d %d %d %d %d %d] rssi %d, ScanResp: %u, AdvType: %u\r\n",
+// params->peerAddr[5], params->peerAddr[4], params->peerAddr[3], params->peerAddr[2], params->peerAddr[1], params->peerAddr[0],
+// params->rssi, params->isScanResponse, params->type);
+
+#if DUMP_ADV_DATA
+ for (unsigned index = 0; index < params->advertisingDataLen; index++) {
+ printf("%02x ", params->advertisingData[index]);
+ }
+ printf("\r\n");
+#endif /* DUMP_ADV_DATA */
+}
+
+void blink(void){
+ myled = !myled;
+}
+
+int main(void)
+{
+ myled = 1;
+ printf("{{success}}" "\n" "{{end}}" "\n");
+ tick.attach(blink,1);
+ for (int i = 0; i < 6; i++){
+ scanf("%hhu",&address[i]);
+ }
+
+ BLE_CHECK(ble.init());
+
+ BLE_CHECK(ble.gap().setScanParams(500 /* scan interval */, 200 /* scan window */, 0, true));
+ BLE_CHECK(ble.gap().startScan(advertisementCallback));
+
+
+}
\ No newline at end of file
diff -r 000000000000 -r e492c28cdf42 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Jul 23 10:09:45 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/7cff1c4259d7 \ No newline at end of file
diff -r 000000000000 -r e492c28cdf42 nRF51822.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/nRF51822.lib Thu Jul 23 10:09:45 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#7c68c8d67e1f