Diff: examples/src/ota_example.cpp

Revision:

43:97fd5b4de956

Parent:

42:20f6b29a9903

--- a/examples/src/ota_example.cpp	Tue May 25 09:54:33 2021 -0500
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,181 +0,0 @@
-#include "dot_util.h"
-#include "RadioEvent.h"
-
-#if ACTIVE_EXAMPLE == OTA_EXAMPLE
-
-/////////////////////////////////////////////////////////////////////////////
-// -------------------- DOT LIBRARY REQUIRED ------------------------------//
-// * Because these example programs can be used for both mDot and xDot     //
-//     devices, the LoRa stack is not included. The libmDot library should //
-//     be imported if building for mDot devices. The libxDot library       //
-//     should be imported if building for xDot devices.                    //
-// * https://developer.mbed.org/teams/MultiTech/code/libmDot-dev-mbed5/    //
-// * https://developer.mbed.org/teams/MultiTech/code/libmDot-mbed5/        //
-// * https://developer.mbed.org/teams/MultiTech/code/libxDot-dev-mbed5/    //
-// * https://developer.mbed.org/teams/MultiTech/code/libxDot-mbed5/        //
-/////////////////////////////////////////////////////////////////////////////
-
-/////////////////////////////////////////////////////////////
-// * these options must match the settings on your gateway //
-// * edit their values to match your configuration         //
-// * frequency sub band is only relevant for the 915 bands //
-// * either the network name and passphrase can be used or //
-//     the network ID (8 bytes) and KEY (16 bytes)         //
-/////////////////////////////////////////////////////////////
-static std::string network_name = "MultiTech";
-static std::string network_passphrase = "MultiTech";
-static uint8_t network_id[] = { 0x6C, 0x4E, 0xEF, 0x66, 0xF4, 0x79, 0x86, 0xA6 };
-static uint8_t network_key[] = { 0x1F, 0x33, 0xA1, 0x70, 0xA5, 0xF1, 0xFD, 0xA0, 0xAB, 0x69, 0x7A, 0xAE, 0x2B, 0x95, 0x91, 0x6B };
-static uint8_t frequency_sub_band = 0;
-static lora::NetworkType network_type = lora::PUBLIC_LORAWAN;
-static uint8_t join_delay = 5;
-static uint8_t ack = 0;
-static bool adr = true;
-
-// deepsleep consumes slightly less current than sleep
-// in sleep mode, IO state is maintained, RAM is retained, and application will resume after waking up
-// in deepsleep mode, IOs float, RAM is lost, and application will start from beginning after waking up
-// if deep_sleep == true, device will enter deepsleep mode
-static bool deep_sleep = false;
-
-mDot* dot = NULL;
-lora::ChannelPlan* plan = NULL;
-
-mbed::UnbufferedSerial pc(USBTX, USBRX);
-
-#if defined(TARGET_XDOT_L151CC)
-I2C i2c(I2C_SDA, I2C_SCL);
-ISL29011 lux(i2c);
-#else
-AnalogIn lux(XBEE_AD0);
-#endif
-
-int main() {
-    // Custom event handler for automatically displaying RX data
-    RadioEvent events;
-
-    pc.baud(115200);
-
-#if defined(TARGET_XDOT_L151CC)
-    i2c.frequency(400000);
-#endif
-
-    mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL);
-
-    // Create channel plan
-    plan = create_channel_plan();
-    assert(plan);
-
-    dot = mDot::getInstance(plan);
-    assert(dot);
-
-    // attach the custom events handler
-    dot->setEvents(&events);
-
-    if (!dot->getStandbyFlag() && !dot->getPreserveSession()) {
-        logInfo("mbed-os library version: %d.%d.%d", MBED_MAJOR_VERSION, MBED_MINOR_VERSION, MBED_PATCH_VERSION);
-
-        // start from a well-known state
-        logInfo("defaulting Dot configuration");
-        dot->resetConfig();
-        dot->resetNetworkSession();
-
-        // make sure library logging is turned on
-        dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
-
-        // update configuration if necessary
-        if (dot->getJoinMode() != mDot::OTA) {
-            logInfo("changing network join mode to OTA");
-            if (dot->setJoinMode(mDot::OTA) != mDot::MDOT_OK) {
-                logError("failed to set network join mode to OTA");
-            }
-        }
-
-        // To preserve session over power-off or reset enable this flag
-        // dot->setPreserveSession(true);
-
-        // in OTA and AUTO_OTA join modes, the credentials can be passed to the library as a name and passphrase or an ID and KEY
-        // only one method or the other should be used!
-        // network ID = crc64(network name)
-        // network KEY = cmac(network passphrase)
-        update_ota_config_name_phrase(network_name, network_passphrase, frequency_sub_band, network_type, ack);
-        //update_ota_config_id_key(network_id, network_key, frequency_sub_band, network_type, ack);
-
-        // configure network link checks
-        // network link checks are a good alternative to requiring the gateway to ACK every packet and should allow a single gateway to handle more Dots
-        // check the link every count packets
-        // declare the Dot disconnected after threshold failed link checks
-        // for count = 3 and threshold = 5, the Dot will ask for a link check response every 5 packets and will consider the connection lost if it fails to receive 3 responses in a row
-        update_network_link_check_config(3, 5);
-
-        // enable or disable Adaptive Data Rate
-        dot->setAdr(adr);
-
-        // Configure the join delay
-        dot->setJoinDelay(join_delay);
-
-        // save changes to configuration
-        logInfo("saving configuration");
-        if (!dot->saveConfig()) {
-            logError("failed to save configuration");
-        }
-
-        // display configuration
-        display_config();
-    } else {
-        // restore the saved session if the dot woke from deepsleep mode
-        // useful to use with deepsleep because session info is otherwise lost when the dot enters deepsleep
-        logInfo("restoring network session from NVM");
-        dot->restoreNetworkSession();
-    }
-
-    while (true) {
-        uint16_t light;
-        std::vector<uint8_t> tx_data;
-
-        // join network if not joined
-        if (!dot->getNetworkJoinStatus()) {
-            join_network();
-        }
-
-#if defined(TARGET_XDOT_L151CC)
-        // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range
-        lux.setMode(ISL29011::ALS_CONT);
-        lux.setResolution(ISL29011::ADC_16BIT);
-        lux.setRange(ISL29011::RNG_64000);
-
-        // get the latest light sample and send it to the gateway
-        light = lux.getData();
-        tx_data.push_back((light >> 8) & 0xFF);
-        tx_data.push_back(light & 0xFF);
-        logInfo("light: %lu [0x%04X]", light, light);
-        send_data(tx_data);
-
-        // put the LSL29011 ambient light sensor into a low power state
-        lux.setMode(ISL29011::PWR_DOWN);
-#else
-        // get some dummy data and send it to the gateway
-        light = lux.read_u16();
-        tx_data.push_back((light >> 8) & 0xFF);
-        tx_data.push_back(light & 0xFF);
-        logInfo("light: %lu [0x%04X]", light, light);
-        send_data(tx_data);
-#endif
-
-        // if going into deepsleep mode, save the session so we don't need to join again after waking up
-        // not necessary if going into sleep mode since RAM is retained
-        if (deep_sleep) {
-            logInfo("saving network session to NVM");
-            dot->saveNetworkSession();
-        }
-
-        // ONLY ONE of the three functions below should be uncommented depending on the desired wakeup method
-        //sleep_wake_rtc_only(deep_sleep);
-        //sleep_wake_interrupt_only(deep_sleep);
-        sleep_wake_rtc_or_interrupt(deep_sleep);
-    }
-
-    return 0;
-}
-
-#endif