Diff: main.cpp

Revision:

6:37ebd143b246

Parent:

4:7876f757c6e8

Child:

7:8c5ef9c24734

--- a/main.cpp	Mon May 29 03:18:13 2017 +0000
+++ b/main.cpp	Thu Sep 14 07:46:05 2017 +0000
@@ -12,9 +12,10 @@
 #include "LCD_DISCO_F769NI.h"
 #include "lcd_log.h"
 
-
+#include <stdio.h>
+#include <time.h>
+#include <math.h>
 #include <iostream>
-#include <cmath>
 using namespace std;
 
 #define HTTP_STATUS_LINE "HTTP/1.0 200 OK"
@@ -36,6 +37,8 @@
 
 TS_StateTypeDef  TS_State = {0};
 Serial pc(USBTX, USBRX);
+
+Serial targ(D1, D0);
 #define WIFI_RX PC_12
 #define WIFI_TX PD_2
 
@@ -54,9 +57,11 @@
 }
 
 void led_thread() {
+    led_green = !led_green;
     while(true) {
         Thread::wait(200);
         led1 = !led1;
+        led_green = !led_green;
     }
 }
 
@@ -65,32 +70,26 @@
 void clock_thread() {
     char timestr[64] = "";
     while(1) {
-        time_t seconds = time(NULL);
-        sprintf(timestr, "Time = %s\0", ctime(&seconds));
+        time_t seconds;
+        time(&seconds);
+        sprintf(timestr, "Time = %s", ctime(&seconds));
         LCD_LOG_SetHeader((uint8_t *) timestr);
         Thread::wait(1000);
     }
-    
+
 }
 
 void gui_thread2() {
-   
-    
-     uint32_t i = 0;  
-     
+
+     uint32_t i = 0;
      BSP_LCD_Init();
      BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
     LCD_LOG_SetHeader((uint8_t *) "Serielle Schnittstelle");
     //LCD_LOG_Init();
 
     while(1) {
-        led1 = 0;
-        led_green = 1;
-        printf("Test %d\n",i++ );
+        pc.printf("%c", targ.getc());
 
-        
-        led1 = 1;
-        led_green = 0;
     }
 }
 
@@ -99,22 +98,22 @@
   /*  BSP_LCD_Init();
     BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
     LCD_LOG_SetHeader((uint8_t *) "Oszilloskop");*/
-    
-     double M_PI = 3.14159265358979323846;
+
+        double pi = 3.141592;
         double a = 0.0;
-        double inc = M_PI/25.0;
+        double inc = pi/25.0;
         double abstand = lcd.GetYSize() / 2;
         double prev_x = 0, prev_y = abstand, x, y;
-       
+
         lcd.SetBackColor((uint32_t) 0x00000000);
         lcd.SetTextColor((uint32_t) 0xffffffff);
         //lcd.DrawLine(0, 0, 100, 100);
-        //for(int i=0; i<1000; i=i+4) 
+        //for(int i=0; i<1000; i=i+4)
         int i;
         while(1){
           x = i;
           y = abstand + sin(a) * 200.0;
-          
+
           //lcd.Clear((uint32_t) 0xffffffff);
           //lcd.SetColorKeying(1, (uint32_t) 0xff000000);
           lcd.DrawLine(prev_x, prev_y, x, y);
@@ -170,25 +169,25 @@
 void srvLoop()
 {
     printf("Basic HTTP server example\n");
-    
+
     EthernetInterface eth;
     eth.connect();
-    
+
     printf("The target IP address is '%s'\n", eth.get_ip_address());
-    
+
     TCPServer srv;
     TCPSocket clt_sock;
     SocketAddress clt_addr;
-    
+
     /* Open the server on ethernet stack */
     srv.open(&eth);
-    
+
     /* Bind the HTTP port (TCP 80) to the server */
     srv.bind(eth.get_ip_address(), 80);
-    
+
     /* Can handle 5 simultaneous connections */
     srv.listen(5);
-    
+
     while (true) {
         srv.accept(&clt_sock, &clt_addr);
         printf("accept %s:%d\n", clt_addr.get_ip_address(), clt_addr.get_port());
@@ -197,30 +196,32 @@
 }
 
 void esp_thread() {
-    
+
     while(1) {
        // pc.putc(wifi.getc());
     }
 }
 
 int main(void) {
-    pc.baud(115200*2);
+    pc.baud(115200);
+    targ.baud(115200);
     //wifi.baud(115200);
     cout << "Hallo Joscha!!!" << endl;
-    Thread printThread(osPriorityNormal), ledThread(osPriorityNormal), 
+    Thread printThread(osPriorityNormal), ledThread(osPriorityNormal),
         guiThread(osPriorityNormal), touchThread(osPriorityNormal), clockThread(osPriorityNormal), espThread(osPriorityNormal);
-    
+
   //  printThread.start(print_thread);
-  //  ledThread.start(led_thread);
-    guiThread.start(gui_scope);
+    ledThread.start(led_thread);
+    guiThread.start(gui_thread2);
+   // guiThread.start(gui_scope);
   //   touchThread.start(touch_thread);
-   //  clockThread.start(clock_thread);
+     clockThread.start(clock_thread);
   //   espThread.start(esp_thread);
   //  Thread tsrv;
   //  tsrv.start(srvLoop);
 
 
     while(1) {
-        
+
     }
-}
+}
\ No newline at end of file