WIZwikiREST-io exercise code for WIZnet Academy
Dependencies: MbedJSONValue_v102 WIZnetInterface mbed
Fork of WIZwiki-REST-io_v103 by
Diff: main.cpp
- Revision:
- 0:5886f525a4ad
- Child:
- 1:728e5b5c8dae
diff -r 000000000000 -r 5886f525a4ad main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Wed Mar 02 03:28:08 2016 +0000 @@ -0,0 +1,153 @@ +#include "mbed.h" +#include "HTTPServer.h" +#include "RequestHandler.h" +#include "EthernetInterface.h" +#include "MbedJSONValue.h" + +#define SERVER_PORT 80 + +EthernetInterface eth; +HTTPServer WIZwikiWebSvr; +MbedJSONValue WIZwikiREST; + +// Enter a MAC address for your controller below. +uint8_t mac_addr[6] = {0x00, 0x08, 0xDC, 0x00, 0x01, 0xFE}; +char mac_str[20]; +char ip_addr[] = "192.168.100.100"; +char subnet_mask[] = "255.255.255.0"; +char gateway_addr[] = "192.168.100.1"; + +DigitalOut LED_1(PA_1); +DigitalOut LED_2(PA_2); + +DigitalInOut P05(P5); +DigitalInOut P06(P6); + +void WIZwiki_REST_init(); + +int main(void) +{ + sprintf(mac_str, "%02X:%02X:%02X:%02X:%02X:%02X",mac_addr[0],mac_addr[1], + mac_addr[2],mac_addr[3], + mac_addr[4],mac_addr[5]); + //GPIO Set + P05.output(); + P05.write(1); + P06.input(); + + //LED Setbit + LED_1.write(0); // LED On + LED_2.write(1); // LED Off + + WIZwiki_REST_init(); + + // Serialize it into a JSON string + printf("\r\n"); + printf("-------------------------WIZwikiREST--------------------------- \r\n"); + printf("%s\r\n", WIZwikiREST.serialize().c_str()); + printf("--------------------------------------------------------------- \r\n"); + + WIZwikiWebSvr.add_request_handler("GET", new GetRequestHandler()); + //WIZwikiWebSvr.add_request_handler("DELETE", new DeleteRequestHandler()); + //WIZwikiWebSvr.add_request_handler("PUT", new PutRequestHandler()); + + #ifdef DHCP + eth.init(mac_addr); //Use DHCP + #else + eth.init(mac_addr, ip_addr, subnet_mask, gateway_addr); //Not Use DHCP + #endif + + printf("Check Ethernet Link\r\n"); + + while(1) //Wait link up + { + if(eth.link() == true) + break; + } + + printf("Link up\r\n"); + printf("IP Address is %s\r\n", eth.getIPAddress()); + + if(!WIZwikiWebSvr.init(SERVER_PORT)) + { + eth.disconnect(); + return -1; + } + + while(1) + { + WIZwikiWebSvr.run(); + } +} + +void WIZwiki_REST_init(void) +{ + //Fill the object + WIZwikiREST["Name"] = "WIZwiki-REST-01"; + //Network + WIZwikiREST["Network"]["MAC"] = mac_str; + WIZwikiREST["Network"]["IP"] = ip_addr; + WIZwikiREST["Network"]["SN"] = subnet_mask; + WIZwikiREST["Network"]["GW"] = gateway_addr; + //LEDs + WIZwikiREST["LEDs"]["LED_1"]["Value"] = (LED_1.read() ? "Off" : "On"); + WIZwikiREST["LEDs"]["LED_2"]["Value"] = (LED_2.read() ? "Off" : "On"); + + // GPIOs + WIZwikiREST["GPIOs"]["P05"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_5) ? "Output" : "Input"); + WIZwikiREST["GPIOs"]["P05"]["Value"] = (P05.read() ? "1" : "0"); + WIZwikiREST["GPIOs"]["P06"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_6) ? "Output" : "Input"); + WIZwikiREST["GPIOs"]["P06"]["Value"] = (P06.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P07"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_7) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P07"]["Value"] = (P07.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P08"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_8) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P08"]["Value"] = (P08.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P09"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_9) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P09"]["Value"] = (P09.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P10"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_10) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P10"]["Value"] = (P10.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P11"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_11) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P11"]["Value"] = (P11.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P12"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_12) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P12"]["Value"] = (P12.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P13"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_13) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P13"]["Value"] = (P13.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P14"]["Mode"] = ((GPIOA->OUTENSET&GPIO_Pin_14) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P14"]["Value"] = (P14.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P15"]["Mode"] = ((GPIOB->OUTENSET&GPIO_Pin_0) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P15"]["Value"] = (P15.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P16"]["Mode"] = ((GPIOB->OUTENSET&GPIO_Pin_1) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P16"]["Value"] = (P16.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P17"]["Mode"] = ((GPIOB->OUTENSET&GPIO_Pin_2) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P17"]["Value"] = (P17.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P18"]["Mode"] = ((GPIOB->OUTENSET&GPIO_Pin_3) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P18"]["Value"] = (P18.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P19"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_8) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P19"]["Value"] = (P19.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P20"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_4) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P20"]["Value"] = (P20.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P21"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_0) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P21"]["Value"] = (P21.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P22"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_1) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P22"]["Value"] = (P22.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P23"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_2) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P23"]["Value"] = (P23.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P24"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_3) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P24"]["Value"] = (P24.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P25"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_9) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P25"]["Value"] = (P25.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P26"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_5) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P26"]["Value"] = (P26.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P27"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_12) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P27"]["Value"] = (P27.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P28"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_13) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P28"]["Value"] = (P28.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P29"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_14) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P29"]["Value"] = (P29.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P30"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_15) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P30"]["Value"] = (P30.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P31"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_6) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P31"]["Value"] = (P31.read() ? "1" : "0"); +// WIZwikiREST["GPIOs"]["P32"]["Mode"] = ((GPIOC->OUTENSET&GPIO_Pin_7) ? "Output" : "Input"); +// WIZwikiREST["GPIOs"]["P32"]["Value"] = (P32.read() ? "1" : "0"); +}