Diff: m3pi/m3pi.cpp

Revision:

0:a29bcf098632

diff -r 000000000000 -r a29bcf098632 m3pi/m3pi.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/m3pi/m3pi.cpp	Mon Jun 18 09:27:10 2012 +0000
@@ -0,0 +1,284 @@
+/* m3pi Library
+ *
+ * Copyright (c) 2007-2010 cstyles
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "mbed.h"
+#include "m3pi.h"
+
+m3pi::m3pi(PinName nrst, PinName tx, PinName rx) :  Stream("m3pi"), _nrst(nrst), _ser(tx, rx)  {
+    _ser.baud(115200);
+    reset();
+}
+
+m3pi::m3pi() :  Stream("m3pi"), _nrst(p23), _ser(p9, p10)  {
+    _ser.baud(115200);
+    reset();
+}
+
+
+void m3pi::reset () {
+    _nrst = 0;
+    wait (0.01);
+    _nrst = 1;
+    wait (0.1);
+}
+
+void m3pi::left_motor (float speed) {
+    motor(0,speed);
+}
+
+void m3pi::right_motor (float speed) {
+    motor(1,speed);
+}
+
+void m3pi::forward (float speed) {
+    motor(0,speed);
+    motor(1,speed);
+}
+
+void m3pi::backward (float speed) {
+    motor(0,-1.0*speed);
+    motor(1,-1.0*speed);
+}
+
+void m3pi::left (float speed) {
+    motor(0,speed);
+    motor(1,-1.0*speed);
+}
+
+void m3pi::right (float speed) {
+    motor(0,-1.0*speed);
+    motor(1,speed);
+}
+
+void m3pi::stop (void) {
+    motor(0,0.0);
+    motor(1,0.0);
+}
+
+void m3pi::motor (int motor, float speed) {
+    char opcode = 0x0;
+    if (speed > 0.0) {
+        if (motor==1)
+            opcode = M1_FORWARD;
+        else
+            opcode = M2_FORWARD;
+    } else {
+        if (motor==1)
+            opcode = M1_BACKWARD;
+        else
+            opcode = M2_BACKWARD;
+    }
+    unsigned char arg = 0x7f * abs(speed);
+
+    _ser.putc(opcode);
+    _ser.putc(arg);
+}
+
+float m3pi::battery() {
+    _ser.putc(SEND_BATTERY_MILLIVOLTS);
+    char lowbyte = _ser.getc();
+    char hibyte  = _ser.getc();
+    float v = ((lowbyte + (hibyte << 8))/1000.0);
+    return(v);
+}
+
+float m3pi::line_position() {
+    int pos = 0;
+    _ser.putc(SEND_LINE_POSITION);
+    pos = _ser.getc();
+    pos += _ser.getc() << 8;
+
+    float fpos = ((float)pos - 2048.0)/2048.0;
+    return(fpos);
+}
+
+char m3pi::sensor_auto_calibrate() {
+    _ser.putc(AUTO_CALIBRATE);
+    return(_ser.getc());
+}
+
+
+void m3pi::calibrate(void) {
+    _ser.putc(PI_CALIBRATE);
+}
+
+void m3pi::reset_calibration() {
+    _ser.putc(LINE_SENSORS_RESET_CALIBRATION);
+}
+
+void m3pi::PID_start(int max_speed, int a, int b, int c, int d) {
+    _ser.putc(max_speed);
+    _ser.putc(a);
+    _ser.putc(b);
+    _ser.putc(c);
+    _ser.putc(d);
+}
+
+void m3pi::PID_stop() {
+    _ser.putc(STOP_PID);
+}
+
+float m3pi::pot_voltage(void) {
+    int volt = 0;
+    _ser.putc(SEND_TRIMPOT);
+    volt = _ser.getc();
+    volt += _ser.getc() << 8;
+    return(volt);
+}
+
+
+void m3pi::leds(int val) {
+
+    BusOut _leds(p20,p19,p18,p17,p16,p15,p14,p13);
+    _leds = val;
+}
+
+
+void m3pi::locate(int x, int y) {
+    _ser.putc(DO_LCD_GOTO_XY);
+    _ser.putc(x);
+    _ser.putc(y);
+}
+
+void m3pi::cls(void) {
+    _ser.putc(DO_CLEAR);
+}
+
+int m3pi::print (char* text, int length) {
+    _ser.putc(DO_PRINT);
+    _ser.putc(length);
+    for (int i = 0 ; i < length ; i++) {
+        _ser.putc(text[i]);
+    }
+    return(0);
+}
+
+void m3pi::get_raw_sensors(int* values) {
+    _ser.putc(SEND_RAW_SENSOR_VALUES);
+    for (int i = 0; i<5; i++) {
+        while(_ser.readable() == 0){}
+        values[i] = _ser.getc();
+        while(_ser.readable() == 0){}
+        values[i] += _ser.getc() << 8;
+        //values[i] -= raw_white_levels[i];
+    }
+}
+
+
+void m3pi::get_calibrated_sensors(float* values) {
+    int temp[5];
+    _ser.putc(SEND_CALIBRATED_SENSOR_VALUES);
+    for (int i = 0; i<5; i++) {
+        temp[i] = _ser.getc();
+        temp[i] += _ser.getc() << 8;
+        values[i] = float(temp[i]) / 1000;
+    }
+}
+
+void m3pi::get_white_levels() {
+    get_raw_sensors(raw_white_levels);
+}
+
+int m3pi::is_line()
+{
+    int ret = 0;
+    int edgeCount = 0;
+    int temp[5];
+    get_raw_sensors(temp);
+    for(int i = 0; i <5 ; i++)
+    {
+        if(temp[i] - raw_white_levels[i]>= LINE_THRESHOLD)
+        {
+        ret++;
+        if(i == 0|| i== 4)
+        {
+            edgeCount--;
+        }
+        else
+        {
+            edgeCount++;
+        }
+        }
+        
+    }
+    
+    if(edgeCount >=0 && ret>0)
+    {
+       return 1;
+    }
+    else if(edgeCount <0 && ret>0)
+    {
+        return -1;    
+    }
+    else
+    {
+        return 0;
+    }
+    
+    
+}
+
+int m3pi::_putc (int c) {
+    _ser.putc(DO_PRINT);
+    _ser.putc(0x1);
+    _ser.putc(c);
+    wait (0.001);
+    return(c);
+}
+
+int m3pi::_getc (void) {
+    char r = 0;
+    return(r);
+}
+
+int m3pi::putc (int c) {
+    return(_ser.putc(c));
+}
+
+int m3pi::getc (void) {
+    return(_ser.getc());
+}
+
+
+
+
+
+#ifdef MBED_RPC
+const rpc_method *m3pi::get_rpc_methods() {
+    static const rpc_method rpc_methods[] = {{ "forward", rpc_method_caller<m3pi, float, &m3pi::forward> },
+        { "backward", rpc_method_caller<m3pi, float, &m3pi::backward> },
+        { "left", rpc_method_caller<m3pi, float, &m3pi::left> },
+        { "right", rpc_method_caller<m3pi, float, &m3pi::right> },
+        { "stop", rpc_method_caller<m3pi, &m3pi::stop> },
+        { "left_motor", rpc_method_caller<m3pi, float, &m3pi::left_motor> },
+        { "right_motor", rpc_method_caller<m3pi, float, &m3pi::right_motor> },
+        { "battery", rpc_method_caller<float, m3pi, &m3pi::battery> },
+        { "line_position", rpc_method_caller<float, m3pi, &m3pi::line_position> },
+        { "sensor_auto_calibrate", rpc_method_caller<char, m3pi, &m3pi::sensor_auto_calibrate> },
+
+
+        RPC_METHOD_SUPER(Base)
+    };
+    return rpc_methods;
+}
+#endif