Jolyon Hill
Changes to support running on smaller memory LPC device LPC1764
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/core_caFunc.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 141:a2b798ec44f6
--- a/targets/cmsis/core_caFunc.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/core_caFunc.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,1427 +1,1427 @@
-/**************************************************************************//**
- * @file core_caFunc.h
- * @brief CMSIS Cortex-A Core Function Access Header File
- * @version V3.10
- * @date 30 Oct 2013
- *
- * @note
- *
- ******************************************************************************/
-/* Copyright (c) 2009 - 2013 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#ifndef __CORE_CAFUNC_H__
-#define __CORE_CAFUNC_H__
-
-
-/* ########################### Core Function Access ########################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
- @{
- */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#if (__ARMCC_VERSION < 400677)
- #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
-#endif
-
-#define MODE_USR 0x10
-#define MODE_FIQ 0x11
-#define MODE_IRQ 0x12
-#define MODE_SVC 0x13
-#define MODE_MON 0x16
-#define MODE_ABT 0x17
-#define MODE_HYP 0x1A
-#define MODE_UND 0x1B
-#define MODE_SYS 0x1F
-
-/** \brief Get APSR Register
-
- This function returns the content of the APSR Register.
-
- \return APSR Register value
- */
-__STATIC_INLINE uint32_t __get_APSR(void)
-{
- register uint32_t __regAPSR __ASM("apsr");
- return(__regAPSR);
-}
-
-
-/** \brief Get CPSR Register
-
- This function returns the content of the CPSR Register.
-
- \return CPSR Register value
- */
-__STATIC_INLINE uint32_t __get_CPSR(void)
-{
- register uint32_t __regCPSR __ASM("cpsr");
- return(__regCPSR);
-}
-
-/** \brief Set Stack Pointer
-
- This function assigns the given value to the current stack pointer.
-
- \param [in] topOfStack Stack Pointer value to set
- */
-register uint32_t __regSP __ASM("sp");
-__STATIC_INLINE void __set_SP(uint32_t topOfStack)
-{
- __regSP = topOfStack;
-}
-
-
-/** \brief Get link register
-
- This function returns the value of the link register
-
- \return Value of link register
- */
-register uint32_t __reglr __ASM("lr");
-__STATIC_INLINE uint32_t __get_LR(void)
-{
- return(__reglr);
-}
-
-/** \brief Set link register
-
- This function sets the value of the link register
-
- \param [in] lr LR value to set
- */
-__STATIC_INLINE void __set_LR(uint32_t lr)
-{
- __reglr = lr;
-}
-
-/** \brief Set Process Stack Pointer
-
- This function assigns the given value to the USR/SYS Stack Pointer (PSP).
-
- \param [in] topOfProcStack USR/SYS Stack Pointer value to set
- */
-__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
-{
- ARM
- PRESERVE8
-
- BIC R0, R0, #7 ;ensure stack is 8-byte aligned
- MRS R1, CPSR
- CPS #MODE_SYS ;no effect in USR mode
- MOV SP, R0
- MSR CPSR_c, R1 ;no effect in USR mode
- ISB
- BX LR
-
-}
-
-/** \brief Set User Mode
-
- This function changes the processor state to User Mode
- */
-__STATIC_ASM void __set_CPS_USR(void)
-{
- ARM
-
- CPS #MODE_USR
- BX LR
-}
-
-
-/** \brief Enable FIQ
-
- This function enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __enable_fault_irq __enable_fiq
-
-
-/** \brief Disable FIQ
-
- This function disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __disable_fault_irq __disable_fiq
-
-
-/** \brief Get FPSCR
-
- This function returns the current value of the Floating Point Status/Control register.
-
- \return Floating Point Status/Control register value
- */
-__STATIC_INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- register uint32_t __regfpscr __ASM("fpscr");
- return(__regfpscr);
-#else
- return(0);
-#endif
-}
-
-
-/** \brief Set FPSCR
-
- This function assigns the given value to the Floating Point Status/Control register.
-
- \param [in] fpscr Floating Point Status/Control value to set
- */
-__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- register uint32_t __regfpscr __ASM("fpscr");
- __regfpscr = (fpscr);
-#endif
-}
-
-/** \brief Get FPEXC
-
- This function returns the current value of the Floating Point Exception Control register.
-
- \return Floating Point Exception Control register value
- */
-__STATIC_INLINE uint32_t __get_FPEXC(void)
-{
-#if (__FPU_PRESENT == 1)
- register uint32_t __regfpexc __ASM("fpexc");
- return(__regfpexc);
-#else
- return(0);
-#endif
-}
-
-
-/** \brief Set FPEXC
-
- This function assigns the given value to the Floating Point Exception Control register.
-
- \param [in] fpscr Floating Point Exception Control value to set
- */
-__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
-{
-#if (__FPU_PRESENT == 1)
- register uint32_t __regfpexc __ASM("fpexc");
- __regfpexc = (fpexc);
-#endif
-}
-
-/** \brief Get CPACR
-
- This function returns the current value of the Coprocessor Access Control register.
-
- \return Coprocessor Access Control register value
- */
-__STATIC_INLINE uint32_t __get_CPACR(void)
-{
- register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
- return __regCPACR;
-}
-
-/** \brief Set CPACR
-
- This function assigns the given value to the Coprocessor Access Control register.
-
- \param [in] cpacr Coprocessor Acccess Control value to set
- */
-__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
-{
- register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
- __regCPACR = cpacr;
- __ISB();
-}
-
-/** \brief Get CBAR
-
- This function returns the value of the Configuration Base Address register.
-
- \return Configuration Base Address register value
- */
-__STATIC_INLINE uint32_t __get_CBAR() {
- register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
- return(__regCBAR);
-}
-
-/** \brief Get TTBR0
-
- This function returns the value of the Translation Table Base Register 0.
-
- \return Translation Table Base Register 0 value
- */
-__STATIC_INLINE uint32_t __get_TTBR0() {
- register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
- return(__regTTBR0);
-}
-
-/** \brief Set TTBR0
-
- This function assigns the given value to the Translation Table Base Register 0.
-
- \param [in] ttbr0 Translation Table Base Register 0 value to set
- */
-__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
- register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
- __regTTBR0 = ttbr0;
- __ISB();
-}
-
-/** \brief Get DACR
-
- This function returns the value of the Domain Access Control Register.
-
- \return Domain Access Control Register value
- */
-__STATIC_INLINE uint32_t __get_DACR() {
- register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
- return(__regDACR);
-}
-
-/** \brief Set DACR
-
- This function assigns the given value to the Domain Access Control Register.
-
- \param [in] dacr Domain Access Control Register value to set
- */
-__STATIC_INLINE void __set_DACR(uint32_t dacr) {
- register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
- __regDACR = dacr;
- __ISB();
-}
-
-/******************************** Cache and BTAC enable ****************************************************/
-
-/** \brief Set SCTLR
-
- This function assigns the given value to the System Control Register.
-
- \param [in] sctlr System Control Register value to set
- */
-__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
-{
- register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
- __regSCTLR = sctlr;
-}
-
-/** \brief Get SCTLR
-
- This function returns the value of the System Control Register.
-
- \return System Control Register value
- */
-__STATIC_INLINE uint32_t __get_SCTLR() {
- register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
- return(__regSCTLR);
-}
-
-/** \brief Enable Caches
-
- Enable Caches
- */
-__STATIC_INLINE void __enable_caches(void) {
- // Set I bit 12 to enable I Cache
- // Set C bit 2 to enable D Cache
- __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
-}
-
-/** \brief Disable Caches
-
- Disable Caches
- */
-__STATIC_INLINE void __disable_caches(void) {
- // Clear I bit 12 to disable I Cache
- // Clear C bit 2 to disable D Cache
- __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
- __ISB();
-}
-
-/** \brief Enable BTAC
-
- Enable BTAC
- */
-__STATIC_INLINE void __enable_btac(void) {
- // Set Z bit 11 to enable branch prediction
- __set_SCTLR( __get_SCTLR() | (1 << 11));
- __ISB();
-}
-
-/** \brief Disable BTAC
-
- Disable BTAC
- */
-__STATIC_INLINE void __disable_btac(void) {
- // Clear Z bit 11 to disable branch prediction
- __set_SCTLR( __get_SCTLR() & ~(1 << 11));
-}
-
-
-/** \brief Enable MMU
-
- Enable MMU
- */
-__STATIC_INLINE void __enable_mmu(void) {
- // Set M bit 0 to enable the MMU
- // Set AFE bit to enable simplified access permissions model
- // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
- __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
- __ISB();
-}
-
-/** \brief Disable MMU
-
- Disable MMU
- */
-__STATIC_INLINE void __disable_mmu(void) {
- // Clear M bit 0 to disable the MMU
- __set_SCTLR( __get_SCTLR() & ~1);
- __ISB();
-}
-
-/******************************** TLB maintenance operations ************************************************/
-/** \brief Invalidate the whole tlb
-
- TLBIALL. Invalidate the whole tlb
- */
-
-__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
- register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
- __TLBIALL = 0;
- __DSB();
- __ISB();
-}
-
-/******************************** BTB maintenance operations ************************************************/
-/** \brief Invalidate entire branch predictor array
-
- BPIALL. Branch Predictor Invalidate All.
- */
-
-__STATIC_INLINE void __v7_inv_btac(void) {
- register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
- __BPIALL = 0;
- __DSB(); //ensure completion of the invalidation
- __ISB(); //ensure instruction fetch path sees new state
-}
-
-
-/******************************** L1 cache operations ******************************************************/
-
-/** \brief Invalidate the whole I$
-
- ICIALLU. Instruction Cache Invalidate All to PoU
- */
-__STATIC_INLINE void __v7_inv_icache_all(void) {
- register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
- __ICIALLU = 0;
- __DSB(); //ensure completion of the invalidation
- __ISB(); //ensure instruction fetch path sees new I cache state
-}
-
-/** \brief Clean D$ by MVA
-
- DCCMVAC. Data cache clean by MVA to PoC
- */
-__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
- register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
- __DCCMVAC = (uint32_t)va;
- __DMB(); //ensure the ordering of data cache maintenance operations and their effects
-}
-
-/** \brief Invalidate D$ by MVA
-
- DCIMVAC. Data cache invalidate by MVA to PoC
- */
-__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
- register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
- __DCIMVAC = (uint32_t)va;
- __DMB(); //ensure the ordering of data cache maintenance operations and their effects
-}
-
-/** \brief Clean and Invalidate D$ by MVA
-
- DCCIMVAC. Data cache clean and invalidate by MVA to PoC
- */
-__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
- register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
- __DCCIMVAC = (uint32_t)va;
- __DMB(); //ensure the ordering of data cache maintenance operations and their effects
-}
-
-/** \brief Clean and Invalidate the entire data or unified cache
-
- Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
- */
-#pragma push
-#pragma arm
-__STATIC_ASM void __v7_all_cache(uint32_t op) {
- ARM
-
- PUSH {R4-R11}
-
- MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
- ANDS R3, R6, #0x07000000 // Extract coherency level
- MOV R3, R3, LSR #23 // Total cache levels << 1
- BEQ Finished // If 0, no need to clean
-
- MOV R10, #0 // R10 holds current cache level << 1
-Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
- MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
- AND R1, R1, #7 // Isolate those lower 3 bits
- CMP R1, #2
- BLT Skip // No cache or only instruction cache at this level
-
- MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
- ISB // ISB to sync the change to the CacheSizeID reg
- MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
- AND R2, R1, #7 // Extract the line length field
- ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
- LDR R4, =0x3FF
- ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
- CLZ R5, R4 // R5 is the bit position of the way size increment
- LDR R7, =0x7FFF
- ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
-
-Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
-
-Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
- ORR R11, R11, R7, LSL R2 // Factor in the Set number
- CMP R0, #0
- BNE Dccsw
- MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
- B cont
-Dccsw CMP R0, #1
- BNE Dccisw
- MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
- B cont
-Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW. Clean and Invalidate by Set/Way
-cont SUBS R9, R9, #1 // Decrement the Way number
- BGE Loop3
- SUBS R7, R7, #1 // Decrement the Set number
- BGE Loop2
-Skip ADD R10, R10, #2 // Increment the cache number
- CMP R3, R10
- BGT Loop1
-
-Finished
- DSB
- POP {R4-R11}
- BX lr
-
-}
-#pragma pop
-
-
-/** \brief Invalidate the whole D$
-
- DCISW. Invalidate by Set/Way
- */
-
-__STATIC_INLINE void __v7_inv_dcache_all(void) {
- __v7_all_cache(0);
-}
-
-/** \brief Clean the whole D$
-
- DCCSW. Clean by Set/Way
- */
-
-__STATIC_INLINE void __v7_clean_dcache_all(void) {
- __v7_all_cache(1);
-}
-
-/** \brief Clean and invalidate the whole D$
-
- DCCISW. Clean and Invalidate by Set/Way
- */
-
-__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
- __v7_all_cache(2);
-}
-
-#include "core_ca_mmu.h"
-
-#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
-
-#define __inline inline
-
-inline static uint32_t __disable_irq_iar() {
- int irq_dis = __get_CPSR() & 0x80; // 7bit CPSR.I
- __disable_irq();
- return irq_dis;
-}
-
-#define MODE_USR 0x10
-#define MODE_FIQ 0x11
-#define MODE_IRQ 0x12
-#define MODE_SVC 0x13
-#define MODE_MON 0x16
-#define MODE_ABT 0x17
-#define MODE_HYP 0x1A
-#define MODE_UND 0x1B
-#define MODE_SYS 0x1F
-
-/** \brief Set Process Stack Pointer
-
- This function assigns the given value to the USR/SYS Stack Pointer (PSP).
-
- \param [in] topOfProcStack USR/SYS Stack Pointer value to set
- */
-// from rt_CMSIS.c
-__arm static inline void __set_PSP(uint32_t topOfProcStack) {
-__asm(
- " ARM\n"
-// " PRESERVE8\n"
-
- " BIC R0, R0, #7 ;ensure stack is 8-byte aligned \n"
- " MRS R1, CPSR \n"
- " CPS #0x1F ;no effect in USR mode \n" // MODE_SYS
- " MOV SP, R0 \n"
- " MSR CPSR_c, R1 ;no effect in USR mode \n"
- " ISB \n"
- " BX LR \n");
-}
-
-/** \brief Set User Mode
-
- This function changes the processor state to User Mode
- */
-// from rt_CMSIS.c
-__arm static inline void __set_CPS_USR(void) {
-__asm(
- " ARM \n"
-
- " CPS #0x10 \n" // MODE_USR
- " BX LR\n");
-}
-
-/** \brief Set TTBR0
-
- This function assigns the given value to the Translation Table Base Register 0.
-
- \param [in] ttbr0 Translation Table Base Register 0 value to set
- */
-// from mmu_Renesas_RZ_A1.c
-__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
- __MCR(15, 0, ttbr0, 2, 0, 0); // reg to cp15
- __ISB();
-}
-
-/** \brief Set DACR
-
- This function assigns the given value to the Domain Access Control Register.
-
- \param [in] dacr Domain Access Control Register value to set
- */
-// from mmu_Renesas_RZ_A1.c
-__STATIC_INLINE void __set_DACR(uint32_t dacr) {
- __MCR(15, 0, dacr, 3, 0, 0); // reg to cp15
- __ISB();
-}
-
-
-/******************************** Cache and BTAC enable ****************************************************/
-/** \brief Set SCTLR
-
- This function assigns the given value to the System Control Register.
-
- \param [in] sctlr System Control Register value to set
- */
-// from __enable_mmu()
-__STATIC_INLINE void __set_SCTLR(uint32_t sctlr) {
- __MCR(15, 0, sctlr, 1, 0, 0); // reg to cp15
-}
-
-/** \brief Get SCTLR
-
- This function returns the value of the System Control Register.
-
- \return System Control Register value
- */
-// from __enable_mmu()
-__STATIC_INLINE uint32_t __get_SCTLR() {
- uint32_t __regSCTLR = __MRC(15, 0, 1, 0, 0);
- return __regSCTLR;
-}
-
-/** \brief Enable Caches
-
- Enable Caches
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __enable_caches(void) {
- __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
-}
-
-/** \brief Enable BTAC
-
- Enable BTAC
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __enable_btac(void) {
- __set_SCTLR( __get_SCTLR() | (1 << 11));
- __ISB();
-}
-
-/** \brief Enable MMU
-
- Enable MMU
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __enable_mmu(void) {
- // Set M bit 0 to enable the MMU
- // Set AFE bit to enable simplified access permissions model
- // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
- __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
- __ISB();
-}
-
-/******************************** TLB maintenance operations ************************************************/
-/** \brief Invalidate the whole tlb
-
- TLBIALL. Invalidate the whole tlb
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
- uint32_t val = 0;
- __MCR(15, 0, val, 8, 7, 0); // reg to cp15
- __MCR(15, 0, val, 8, 6, 0); // reg to cp15
- __MCR(15, 0, val, 8, 5, 0); // reg to cp15
- __DSB();
- __ISB();
-}
-
-/******************************** BTB maintenance operations ************************************************/
-/** \brief Invalidate entire branch predictor array
-
- BPIALL. Branch Predictor Invalidate All.
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __v7_inv_btac(void) {
- uint32_t val = 0;
- __MCR(15, 0, val, 7, 5, 6); // reg to cp15
- __DSB(); //ensure completion of the invalidation
- __ISB(); //ensure instruction fetch path sees new state
-}
-
-
-/******************************** L1 cache operations ******************************************************/
-
-/** \brief Invalidate the whole I$
-
- ICIALLU. Instruction Cache Invalidate All to PoU
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __v7_inv_icache_all(void) {
- uint32_t val = 0;
- __MCR(15, 0, val, 7, 5, 0); // reg to cp15
- __DSB(); //ensure completion of the invalidation
- __ISB(); //ensure instruction fetch path sees new I cache state
-}
-
-// from __v7_inv_dcache_all()
-__arm static inline void __v7_all_cache(uint32_t op) {
-__asm(
- " ARM \n"
-
- " PUSH {R4-R11} \n"
-
- " MRC p15, 1, R6, c0, c0, 1\n" // Read CLIDR
- " ANDS R3, R6, #0x07000000\n" // Extract coherency level
- " MOV R3, R3, LSR #23\n" // Total cache levels << 1
- " BEQ Finished\n" // If 0, no need to clean
-
- " MOV R10, #0\n" // R10 holds current cache level << 1
- "Loop1: ADD R2, R10, R10, LSR #1\n" // R2 holds cache "Set" position
- " MOV R1, R6, LSR R2 \n" // Bottom 3 bits are the Cache-type for this level
- " AND R1, R1, #7 \n" // Isolate those lower 3 bits
- " CMP R1, #2 \n"
- " BLT Skip \n" // No cache or only instruction cache at this level
-
- " MCR p15, 2, R10, c0, c0, 0 \n" // Write the Cache Size selection register
- " ISB \n" // ISB to sync the change to the CacheSizeID reg
- " MRC p15, 1, R1, c0, c0, 0 \n" // Reads current Cache Size ID register
- " AND R2, R1, #7 \n" // Extract the line length field
- " ADD R2, R2, #4 \n" // Add 4 for the line length offset (log2 16 bytes)
- " movw R4, #0x3FF \n"
- " ANDS R4, R4, R1, LSR #3 \n" // R4 is the max number on the way size (right aligned)
- " CLZ R5, R4 \n" // R5 is the bit position of the way size increment
- " movw R7, #0x7FFF \n"
- " ANDS R7, R7, R1, LSR #13 \n" // R7 is the max number of the index size (right aligned)
-
- "Loop2: MOV R9, R4 \n" // R9 working copy of the max way size (right aligned)
-
- "Loop3: ORR R11, R10, R9, LSL R5 \n" // Factor in the Way number and cache number into R11
- " ORR R11, R11, R7, LSL R2 \n" // Factor in the Set number
- " CMP R0, #0 \n"
- " BNE Dccsw \n"
- " MCR p15, 0, R11, c7, c6, 2 \n" // DCISW. Invalidate by Set/Way
- " B cont \n"
- "Dccsw: CMP R0, #1 \n"
- " BNE Dccisw \n"
- " MCR p15, 0, R11, c7, c10, 2 \n" // DCCSW. Clean by Set/Way
- " B cont \n"
- "Dccisw: MCR p15, 0, R11, c7, c14, 2 \n" // DCCISW, Clean and Invalidate by Set/Way
- "cont: SUBS R9, R9, #1 \n" // Decrement the Way number
- " BGE Loop3 \n"
- " SUBS R7, R7, #1 \n" // Decrement the Set number
- " BGE Loop2 \n"
- "Skip: ADD R10, R10, #2 \n" // increment the cache number
- " CMP R3, R10 \n"
- " BGT Loop1 \n"
-
- "Finished: \n"
- " DSB \n"
- " POP {R4-R11} \n"
- " BX lr \n" );
-}
-
-/** \brief Invalidate the whole D$
-
- DCISW. Invalidate by Set/Way
- */
-// from system_Renesas_RZ_A1.c
-__STATIC_INLINE void __v7_inv_dcache_all(void) {
- __v7_all_cache(0);
-}
-/** \brief Clean and Invalidate D$ by MVA
-
- DCCIMVAC. Data cache clean and invalidate by MVA to PoC
- */
-__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
- __MCR(15, 0, (uint32_t)va, 7, 14, 1);
- __DMB();
-}
-
-#include "core_ca_mmu.h"
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-#define MODE_USR 0x10
-#define MODE_FIQ 0x11
-#define MODE_IRQ 0x12
-#define MODE_SVC 0x13
-#define MODE_MON 0x16
-#define MODE_ABT 0x17
-#define MODE_HYP 0x1A
-#define MODE_UND 0x1B
-#define MODE_SYS 0x1F
-
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
-{
- __ASM volatile ("cpsie i");
-}
-
-/** \brief Disable IRQ Interrupts
-
- This function disables IRQ interrupts by setting the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
-{
- uint32_t result;
-
- __ASM volatile ("mrs %0, cpsr" : "=r" (result));
- __ASM volatile ("cpsid i");
- return(result & 0x80);
-}
-
-
-/** \brief Get APSR Register
-
- This function returns the content of the APSR Register.
-
- \return APSR Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
-{
-#if 1
- register uint32_t __regAPSR;
- __ASM volatile ("mrs %0, apsr" : "=r" (__regAPSR) );
-#else
- register uint32_t __regAPSR __ASM("apsr");
-#endif
- return(__regAPSR);
-}
-
-
-/** \brief Get CPSR Register
-
- This function returns the content of the CPSR Register.
-
- \return CPSR Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
-{
-#if 1
- register uint32_t __regCPSR;
- __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
-#else
- register uint32_t __regCPSR __ASM("cpsr");
-#endif
- return(__regCPSR);
-}
-
-#if 0
-/** \brief Set Stack Pointer
-
- This function assigns the given value to the current stack pointer.
-
- \param [in] topOfStack Stack Pointer value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
-{
- register uint32_t __regSP __ASM("sp");
- __regSP = topOfStack;
-}
-#endif
-
-/** \brief Get link register
-
- This function returns the value of the link register
-
- \return Value of link register
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
-{
- register uint32_t __reglr __ASM("lr");
- return(__reglr);
-}
-
-#if 0
-/** \brief Set link register
-
- This function sets the value of the link register
-
- \param [in] lr LR value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
-{
- register uint32_t __reglr __ASM("lr");
- __reglr = lr;
-}
-#endif
-
-/** \brief Set Process Stack Pointer
-
- This function assigns the given value to the USR/SYS Stack Pointer (PSP).
-
- \param [in] topOfProcStack USR/SYS Stack Pointer value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
-{
- __asm__ volatile (
- ".ARM;"
- ".eabi_attribute Tag_ABI_align8_preserved,1;"
-
- "BIC R0, R0, #7;" /* ;ensure stack is 8-byte aligned */
- "MRS R1, CPSR;"
- "CPS %0;" /* ;no effect in USR mode */
- "MOV SP, R0;"
- "MSR CPSR_c, R1;" /* ;no effect in USR mode */
- "ISB;"
- //"BX LR;"
- :
- : "i"(MODE_SYS)
- : "r0", "r1");
- return;
-}
-
-/** \brief Set User Mode
-
- This function changes the processor state to User Mode
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPS_USR(void)
-{
- __asm__ volatile (
- ".ARM;"
-
- "CPS %0;"
- //"BX LR;"
- :
- : "i"(MODE_USR)
- : );
- return;
-}
-
-
-/** \brief Enable FIQ
-
- This function enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __enable_fault_irq() __asm__ volatile ("cpsie f")
-
-
-/** \brief Disable FIQ
-
- This function disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __disable_fault_irq() __asm__ volatile ("cpsid f")
-
-
-/** \brief Get FPSCR
-
- This function returns the current value of the Floating Point Status/Control register.
-
- \return Floating Point Status/Control register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-#if 1
- uint32_t result;
-
- __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
- return (result);
-#else
- register uint32_t __regfpscr __ASM("fpscr");
- return(__regfpscr);
-#endif
-#else
- return(0);
-#endif
-}
-
-
-/** \brief Set FPSCR
-
- This function assigns the given value to the Floating Point Status/Control register.
-
- \param [in] fpscr Floating Point Status/Control value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-#if 1
- __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
-#else
- register uint32_t __regfpscr __ASM("fpscr");
- __regfpscr = (fpscr);
-#endif
-#endif
-}
-
-/** \brief Get FPEXC
-
- This function returns the current value of the Floating Point Exception Control register.
-
- \return Floating Point Exception Control register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
-{
-#if (__FPU_PRESENT == 1)
-#if 1
- uint32_t result;
-
- __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
- return (result);
-#else
- register uint32_t __regfpexc __ASM("fpexc");
- return(__regfpexc);
-#endif
-#else
- return(0);
-#endif
-}
-
-
-/** \brief Set FPEXC
-
- This function assigns the given value to the Floating Point Exception Control register.
-
- \param [in] fpscr Floating Point Exception Control value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
-{
-#if (__FPU_PRESENT == 1)
-#if 1
- __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
-#else
- register uint32_t __regfpexc __ASM("fpexc");
- __regfpexc = (fpexc);
-#endif
-#endif
-}
-
-/** \brief Get CPACR
-
- This function returns the current value of the Coprocessor Access Control register.
-
- \return Coprocessor Access Control register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
-{
-#if 1
- register uint32_t __regCPACR;
- __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
-#else
- register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
-#endif
- return __regCPACR;
-}
-
-/** \brief Set CPACR
-
- This function assigns the given value to the Coprocessor Access Control register.
-
- \param [in] cpacr Coprocessor Acccess Control value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
-{
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
-#else
- register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
- __regCPACR = cpacr;
-#endif
- __ISB();
-}
-
-/** \brief Get CBAR
-
- This function returns the value of the Configuration Base Address register.
-
- \return Configuration Base Address register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
-#if 1
- register uint32_t __regCBAR;
- __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
-#else
- register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
-#endif
- return(__regCBAR);
-}
-
-/** \brief Get TTBR0
-
- This function returns the value of the Translation Table Base Register 0.
-
- \return Translation Table Base Register 0 value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
-#if 1
- register uint32_t __regTTBR0;
- __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
-#else
- register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
-#endif
- return(__regTTBR0);
-}
-
-/** \brief Set TTBR0
-
- This function assigns the given value to the Translation Table Base Register 0.
-
- \param [in] ttbr0 Translation Table Base Register 0 value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
-#else
- register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
- __regTTBR0 = ttbr0;
-#endif
- __ISB();
-}
-
-/** \brief Get DACR
-
- This function returns the value of the Domain Access Control Register.
-
- \return Domain Access Control Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
-#if 1
- register uint32_t __regDACR;
- __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
-#else
- register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
-#endif
- return(__regDACR);
-}
-
-/** \brief Set DACR
-
- This function assigns the given value to the Domain Access Control Register.
-
- \param [in] dacr Domain Access Control Register value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
-#else
- register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
- __regDACR = dacr;
-#endif
- __ISB();
-}
-
-/******************************** Cache and BTAC enable ****************************************************/
-
-/** \brief Set SCTLR
-
- This function assigns the given value to the System Control Register.
-
- \param [in] sctlr System Control Register value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
-{
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
-#else
- register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
- __regSCTLR = sctlr;
-#endif
-}
-
-/** \brief Get SCTLR
-
- This function returns the value of the System Control Register.
-
- \return System Control Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
-#if 1
- register uint32_t __regSCTLR;
- __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
-#else
- register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
-#endif
- return(__regSCTLR);
-}
-
-/** \brief Enable Caches
-
- Enable Caches
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
- // Set I bit 12 to enable I Cache
- // Set C bit 2 to enable D Cache
- __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
-}
-
-/** \brief Disable Caches
-
- Disable Caches
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
- // Clear I bit 12 to disable I Cache
- // Clear C bit 2 to disable D Cache
- __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
- __ISB();
-}
-
-/** \brief Enable BTAC
-
- Enable BTAC
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
- // Set Z bit 11 to enable branch prediction
- __set_SCTLR( __get_SCTLR() | (1 << 11));
- __ISB();
-}
-
-/** \brief Disable BTAC
-
- Disable BTAC
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
- // Clear Z bit 11 to disable branch prediction
- __set_SCTLR( __get_SCTLR() & ~(1 << 11));
-}
-
-
-/** \brief Enable MMU
-
- Enable MMU
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
- // Set M bit 0 to enable the MMU
- // Set AFE bit to enable simplified access permissions model
- // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
- __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
- __ISB();
-}
-
-/** \brief Disable MMU
-
- Disable MMU
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
- // Clear M bit 0 to disable the MMU
- __set_SCTLR( __get_SCTLR() & ~1);
- __ISB();
-}
-
-/******************************** TLB maintenance operations ************************************************/
-/** \brief Invalidate the whole tlb
-
- TLBIALL. Invalidate the whole tlb
- */
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
-#else
- register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
- __TLBIALL = 0;
-#endif
- __DSB();
- __ISB();
-}
-
-/******************************** BTB maintenance operations ************************************************/
-/** \brief Invalidate entire branch predictor array
-
- BPIALL. Branch Predictor Invalidate All.
- */
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
-#else
- register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
- __BPIALL = 0;
-#endif
- __DSB(); //ensure completion of the invalidation
- __ISB(); //ensure instruction fetch path sees new state
-}
-
-
-/******************************** L1 cache operations ******************************************************/
-
-/** \brief Invalidate the whole I$
-
- ICIALLU. Instruction Cache Invalidate All to PoU
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
-#else
- register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
- __ICIALLU = 0;
-#endif
- __DSB(); //ensure completion of the invalidation
- __ISB(); //ensure instruction fetch path sees new I cache state
-}
-
-/** \brief Clean D$ by MVA
-
- DCCMVAC. Data cache clean by MVA to PoC
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
-#else
- register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
- __DCCMVAC = (uint32_t)va;
-#endif
- __DMB(); //ensure the ordering of data cache maintenance operations and their effects
-}
-
-/** \brief Invalidate D$ by MVA
-
- DCIMVAC. Data cache invalidate by MVA to PoC
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
-#else
- register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
- __DCIMVAC = (uint32_t)va;
-#endif
- __DMB(); //ensure the ordering of data cache maintenance operations and their effects
-}
-
-/** \brief Clean and Invalidate D$ by MVA
-
- DCCIMVAC. Data cache clean and invalidate by MVA to PoC
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
-#if 1
- __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
-#else
- register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
- __DCCIMVAC = (uint32_t)va;
-#endif
- __DMB(); //ensure the ordering of data cache maintenance operations and their effects
-}
-
-/** \brief Clean and Invalidate the entire data or unified cache
-
- Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
- */
-extern void __v7_all_cache(uint32_t op);
-
-
-/** \brief Invalidate the whole D$
-
- DCISW. Invalidate by Set/Way
- */
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
- __v7_all_cache(0);
-}
-
-/** \brief Clean the whole D$
-
- DCCSW. Clean by Set/Way
- */
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
- __v7_all_cache(1);
-}
-
-/** \brief Clean and invalidate the whole D$
-
- DCCISW. Clean and Invalidate by Set/Way
- */
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
- __v7_all_cache(2);
-}
-
-#include "core_ca_mmu.h"
-
-#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
-
-#error TASKING Compiler support not implemented for Cortex-A
-
-#endif
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-
-#endif /* __CORE_CAFUNC_H__ */
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 30 Oct 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coprocessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Translation Table Base Register 0.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Translation Table Base Register 0.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Domain Access Control Register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Disable MMU
+
+ Disable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate the entire data or unified cache
+
+ Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW. Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // Increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#define __inline inline
+
+inline static uint32_t __disable_irq_iar() {
+ int irq_dis = __get_CPSR() & 0x80; // 7bit CPSR.I
+ __disable_irq();
+ return irq_dis;
+}
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+// from rt_CMSIS.c
+__arm static inline void __set_PSP(uint32_t topOfProcStack) {
+__asm(
+ " ARM\n"
+// " PRESERVE8\n"
+
+ " BIC R0, R0, #7 ;ensure stack is 8-byte aligned \n"
+ " MRS R1, CPSR \n"
+ " CPS #0x1F ;no effect in USR mode \n" // MODE_SYS
+ " MOV SP, R0 \n"
+ " MSR CPSR_c, R1 ;no effect in USR mode \n"
+ " ISB \n"
+ " BX LR \n");
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+ */
+// from rt_CMSIS.c
+__arm static inline void __set_CPS_USR(void) {
+__asm(
+ " ARM \n"
+
+ " CPS #0x10 \n" // MODE_USR
+ " BX LR\n");
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Translation Table Base Register 0.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+// from mmu_Renesas_RZ_A1.c
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ __MCR(15, 0, ttbr0, 2, 0, 0); // reg to cp15
+ __ISB();
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Domain Access Control Register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+// from mmu_Renesas_RZ_A1.c
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ __MCR(15, 0, dacr, 3, 0, 0); // reg to cp15
+ __ISB();
+}
+
+
+/******************************** Cache and BTAC enable ****************************************************/
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register value to set
+ */
+// from __enable_mmu()
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr) {
+ __MCR(15, 0, sctlr, 1, 0, 0); // reg to cp15
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+// from __enable_mmu()
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ uint32_t __regSCTLR = __MRC(15, 0, 1, 0, 0);
+ return __regSCTLR;
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_caches(void) {
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_btac(void) {
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ uint32_t val = 0;
+ __MCR(15, 0, val, 8, 7, 0); // reg to cp15
+ __MCR(15, 0, val, 8, 6, 0); // reg to cp15
+ __MCR(15, 0, val, 8, 5, 0); // reg to cp15
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_btac(void) {
+ uint32_t val = 0;
+ __MCR(15, 0, val, 7, 5, 6); // reg to cp15
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ uint32_t val = 0;
+ __MCR(15, 0, val, 7, 5, 0); // reg to cp15
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+// from __v7_inv_dcache_all()
+__arm static inline void __v7_all_cache(uint32_t op) {
+__asm(
+ " ARM \n"
+
+ " PUSH {R4-R11} \n"
+
+ " MRC p15, 1, R6, c0, c0, 1\n" // Read CLIDR
+ " ANDS R3, R6, #0x07000000\n" // Extract coherency level
+ " MOV R3, R3, LSR #23\n" // Total cache levels << 1
+ " BEQ Finished\n" // If 0, no need to clean
+
+ " MOV R10, #0\n" // R10 holds current cache level << 1
+ "Loop1: ADD R2, R10, R10, LSR #1\n" // R2 holds cache "Set" position
+ " MOV R1, R6, LSR R2 \n" // Bottom 3 bits are the Cache-type for this level
+ " AND R1, R1, #7 \n" // Isolate those lower 3 bits
+ " CMP R1, #2 \n"
+ " BLT Skip \n" // No cache or only instruction cache at this level
+
+ " MCR p15, 2, R10, c0, c0, 0 \n" // Write the Cache Size selection register
+ " ISB \n" // ISB to sync the change to the CacheSizeID reg
+ " MRC p15, 1, R1, c0, c0, 0 \n" // Reads current Cache Size ID register
+ " AND R2, R1, #7 \n" // Extract the line length field
+ " ADD R2, R2, #4 \n" // Add 4 for the line length offset (log2 16 bytes)
+ " movw R4, #0x3FF \n"
+ " ANDS R4, R4, R1, LSR #3 \n" // R4 is the max number on the way size (right aligned)
+ " CLZ R5, R4 \n" // R5 is the bit position of the way size increment
+ " movw R7, #0x7FFF \n"
+ " ANDS R7, R7, R1, LSR #13 \n" // R7 is the max number of the index size (right aligned)
+
+ "Loop2: MOV R9, R4 \n" // R9 working copy of the max way size (right aligned)
+
+ "Loop3: ORR R11, R10, R9, LSL R5 \n" // Factor in the Way number and cache number into R11
+ " ORR R11, R11, R7, LSL R2 \n" // Factor in the Set number
+ " CMP R0, #0 \n"
+ " BNE Dccsw \n"
+ " MCR p15, 0, R11, c7, c6, 2 \n" // DCISW. Invalidate by Set/Way
+ " B cont \n"
+ "Dccsw: CMP R0, #1 \n"
+ " BNE Dccisw \n"
+ " MCR p15, 0, R11, c7, c10, 2 \n" // DCCSW. Clean by Set/Way
+ " B cont \n"
+ "Dccisw: MCR p15, 0, R11, c7, c14, 2 \n" // DCCISW, Clean and Invalidate by Set/Way
+ "cont: SUBS R9, R9, #1 \n" // Decrement the Way number
+ " BGE Loop3 \n"
+ " SUBS R7, R7, #1 \n" // Decrement the Set number
+ " BGE Loop2 \n"
+ "Skip: ADD R10, R10, #2 \n" // increment the cache number
+ " CMP R3, R10 \n"
+ " BGT Loop1 \n"
+
+ "Finished: \n"
+ " DSB \n"
+ " POP {R4-R11} \n"
+ " BX lr \n" );
+}
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ __MCR(15, 0, (uint32_t)va, 7, 14, 1);
+ __DMB();
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ register uint32_t __regAPSR;
+ __ASM volatile ("mrs %0, apsr" : "=r" (__regAPSR) );
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+#endif
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __asm__ volatile (
+ ".ARM;"
+ ".eabi_attribute Tag_ABI_align8_preserved,1;"
+
+ "BIC R0, R0, #7;" /* ;ensure stack is 8-byte aligned */
+ "MRS R1, CPSR;"
+ "CPS %0;" /* ;no effect in USR mode */
+ "MOV SP, R0;"
+ "MSR CPSR_c, R1;" /* ;no effect in USR mode */
+ "ISB;"
+ //"BX LR;"
+ :
+ : "i"(MODE_SYS)
+ : "r0", "r1");
+ return;
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPS_USR(void)
+{
+ __asm__ volatile (
+ ".ARM;"
+
+ "CPS %0;"
+ //"BX LR;"
+ :
+ : "i"(MODE_USR)
+ : );
+ return;
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq() __asm__ volatile ("cpsie f")
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq() __asm__ volatile ("cpsid f")
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coprocessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Translation Table Base Register 0.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Translation Table Base Register 0.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Domain Access Control Register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Disable MMU
+
+ Disable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate the entire data or unified cache
+
+ Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */