API for communicating with XBee devices.

Dependencies:   CircularBuffer FixedLengthList

Dependents:   XBeeApiTest XBeeApiSimpleATCmdsExample XBeeApiBroadcastExample XBeeApiBroadcastExampleRTOS ... more

You are viewing an older revision! See the latest version

Homepage

XBeeApi is intended to be a library for providing a high-level API interface to the XBee - for example getChannel() and setChannel(2) methods rather than needing to send( "ATCH" ) and send( "ATCH 2" ) - and then de-code the responses.

See the notebook page here for a description of how the API works & some details on the various classes.

XBeeApi should work if you're using mbed-rtos, though it is not currently threadsafe. Take a look at the XBeeApiBroadcastExampleRTOS example if you're including mbed-rtos.

Example Programs

There are also example programs available:

Transmit

Import programXBeeApiSimpleBroadcastExample

Simple example of how to use XBeeApi - set up the XBee, configure P2P networking then transmit a frame.

Import programXBeeApiBroadcastExample

Example for XBeeAPI; a little more involved than XBeeApiSimpleBroadcastExample with report on failure to set up the XBee and on the transmit status of the message.

Import programXBeeApiBroadcastExampleRTOS

Example of using the XBeeApi library to broadcast a message, based on XBeeApiBroadcastExample. This example shows how to use the library when using mbed-rtos. Before compiling you must open "XbeeApi\Config\XBeeApiCfg.hpp" and change the '#if 0' to '#if 1' on the line above the comment reading "Use RTOS features to make XBeeApi threadsafe"

Settings/Status

Import programXBeeApiSimpleATCmdsExample

Simple example of using XBeeApi to send AT-style commands to the XBee

Receive

Import programXBeeApiSimpleReceiveExample

Simple example of using XBeeApi to receive data packets via wireless

Import programXBeeApiReceiveCallbackExample

Example of using the XBeeApi library to receive a message via a callback method

Import programXBeeApiReceiveCallbackExampleRTOS

Example of using the XBeeApi library to receive a message via a callback method. This example shows how to use the library when using mbed-rtos. See the comment at the top of main.cpp

If you have 2 mbed connected XBees available then you can use XBeeApiSimpleReceiveExample and XBeeApiSimpleBroadcastExample as a pair.

Note that this is still a work in progress!


All wikipages