Diff: XNucleo53LX.cpp

Revision:

3:4ed68a07058d

diff -r 2e644a39daf9 -r 4ed68a07058d XNucleo53LX.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/XNucleo53LX.cpp	Fri Oct 30 15:31:30 2020 +0000
@@ -0,0 +1,110 @@
+#include "XNucleo53LX.h"
+
+XNucleo53LX *XNucleo53LX::_instance = NULL;
+
+
+XNucleo53LX *XNucleo53LX::instance(vl53L3_DevI2C *ext_i2c)
+{
+    if (_instance == NULL) {
+        _instance = new XNucleo53LX(ext_i2c);
+    } else {
+        printf("Failed to create XNucleo53LX instance\n\r\r\n");
+    }
+    return _instance;
+}
+
+XNucleo53LX *XNucleo53LX::instance(vl53L3_DevI2C *ext_i2c,
+                                       PinName gpio1_centre,
+                                       PinName gpio1_left, PinName gpio1_right)
+{
+    if (_instance == NULL) {
+//        printf("instance %d z\n",ext_i2c);
+        _instance = new XNucleo53LX(ext_i2c, gpio1_centre, gpio1_left, gpio1_right);
+    } else {
+        printf("Failed to create XNucleo53LX instance\n\r");
+    }
+    return _instance;
+}
+
+
+int XNucleo53LX::init_board()
+{
+    printf("init_board \n");
+    int status, n_dev = 0;
+
+    sensor_centre->VL53LX_Off();
+    sensor_left->VL53LX_Off();
+    sensor_right->VL53LX_Off();
+    
+
+    
+    // On startup or on the shutdown pin going high the VL53l1 devices have a i2c address of 0x52.
+    // To initialise then we have to bring up one device at a time This involves raising the shutdown pin for that device,
+    // initialising then setting the i2c address to a unique value. Once that is done the shutdown pins don't need to be touched.
+    
+    // set the shutdown pins to be outputs ( they are inputs on power up)
+    stmpe1600_exp1->set_gpio_dir(GPIO_15,OUTPUT);
+    stmpe1600_exp0->set_gpio_dir(GPIO_14,OUTPUT);
+    stmpe1600_exp0->set_gpio_dir(GPIO_15,OUTPUT);
+    
+    // set the shutdown pins to low, this will reset the VL53l1s
+    stmpe1600_exp1->clear_gpio(GPIO_15);
+    stmpe1600_exp0->clear_gpio(GPIO_14);
+    stmpe1600_exp0->clear_gpio(GPIO_15);
+
+// select the first VL53l1. It will have i2c address of 0x52. Set the i2c address to
+//NEW_SENSOR_CENTRE_ADDRESS
+    stmpe1600_exp1->set_gpio(GPIO_15);
+        printf("InitSensor \n");
+    status = sensor_centre->InitSensor(NEW_SENSOR_CENTRE_ADDRESS);
+    if (status) {
+        delete sensor_centre;
+        delete xshutdown_centre;
+        sensor_centre = NULL;
+        xshutdown_centre = NULL;
+        printf("Sensor centre not present\n\r");
+    } else {
+        printf("Sensor centre present\n\r");
+        n_dev++;
+    }
+    
+    // select the second VL53l1. It will have i2c address of 0x52. Set the i2c address to
+    //NEW_SENSOR_LEFT_ADDRESS
+    
+    stmpe1600_exp0->set_gpio(GPIO_14);
+
+    status = sensor_left->InitSensor(NEW_SENSOR_LEFT_ADDRESS);
+    if (status) {
+        delete sensor_left;
+        delete xshutdown_left;
+        sensor_left = NULL;
+        xshutdown_left = NULL;
+        printf("Sensor left not present\n\r");
+    } else {
+        printf("Sensor left present\n\r");
+        n_dev++;
+    }
+    
+     // select the 3rd VL53l1. It will have i2c address of 0x52. Set the i2c address to
+    //NEW_SENSOR_RIGHT_ADDRESS 
+    stmpe1600_exp0->set_gpio(GPIO_15);
+    status = sensor_right->InitSensor(NEW_SENSOR_RIGHT_ADDRESS);
+    if (status) {
+        delete sensor_right;
+        delete xshutdown_right;
+        sensor_right = NULL;
+        xshutdown_right = NULL;
+        printf("Sensor right not present\n\r");
+    } else {
+        printf("Sensor right present\n\r");
+        n_dev++;
+    }
+
+return 0;
+    if (n_dev == 0) {
+        return 1;
+    } else {
+        return 0;
+    }
+}
+