![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Test code attempting to drive a Ebay SSD1306 128X65 LCD from STM F303K8. The chip responds my I2C address scanner but the LCD never turns on or displays anything.
Dependencies: SSD1308_128x64_I2C mbed Adafruit_GFX
Fork of Nucleo-F303K8-ADC-TEST by
Update of sample using Adafruit library to drive a generic Ebay SSD1306 OLED display. On Nucleo-F303K8 it will display reading of first two ADC lines once every couple seconds. Should work with other CPU boards.
Revision 3:47148198f5f2, committed 2016-03-30
- Comitter:
- joeata2wh
- Date:
- Wed Mar 30 14:49:21 2016 +0000
- Parent:
- 2:dc3e84d595c3
- Commit message:
- update to use MIT license
Changed in this revision
main.cpp | Show annotated file Show diff for this revision Revisions of this file |
--- a/main.cpp Mon Mar 21 03:42:56 2016 +0000 +++ b/main.cpp Wed Mar 30 14:49:21 2016 +0000 @@ -1,7 +1,12 @@ /* Example of Reading all the ADC pins PIN and display ot OLED display using - Nucleo_F303K8 by Joseph Ellsworth CTO A2WH - Free for all but no warranty, no promises - Displays voltage read from first 2 ADC lines on OLED display + Nucleo_F303K8. Displays voltage read from first 2 ADC lines on OLED display + By Joseph Ellsworth CTO of A2WH + Take a look at A2WH.com Producing Water from Air using Solar Energy + March-2016 License: https://developer.mbed.org/handbook/MIT-Licence + Please contact us http://a2wh.com for help with custom design projects. + + Used to Drive: ebay part http://www.ebay.com/itm/152000005331?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT 0-96-I2C-IIC-SPI-Serial-White-OLED-LCD-LED-Display-Module-128X64 @@ -34,6 +39,10 @@ AnalogIn pa0(PA_0); AnalogIn pa1(PA_1); +PwmOut fan1(D11); +//PwmOut fan2(D12); +//PwmOut fan3(PA_2); +DigitalOut fan2x(D12); DigitalOut myled(LED1); const float voltMeterARef = 3.3; @@ -57,9 +66,9 @@ { float tval = ain.read(); float volts = tval * voltMeterARef; - float perc = tval * 100.0; + float perc = tval * 100.0f; unsigned short tvalu16 = ain.read_u16 (); - printf("adc %s R=%3.3f V=%3.3f%% U16=%u\r\n",label, tval, volts, tvalu16); + pc.printf("adc %s R=%3.3f V=%3.3f U16=%u\r\n",label, tval, volts, tvalu16); gOled2.printf("%s=%3.3fV\r\n",label,volts); gOled2.display(); return tval; @@ -68,6 +77,7 @@ int main() { + pc.baud(9600); // Display with the Adafruit Library gOled2.printf("%ux%u OLED Display\r\n", gOled2.width(), gOled2.height()); wait(5); @@ -80,8 +90,64 @@ wait(0.1); gOled2.setTextCursor(1,10); readPrint(pa1, "PA_1"); + + float pwmpw = 0.3; //0.0005; //0.09; // 0.1001; + float pwmpp = 3.0; //0.00001; //0.0001; // 0.01001; + //fan2.period_ms(); + //fan2.pulsewidth_ms(200); + + //float pwmpw = 0.1; //0.0005; //0.09; // 0.1001; + //float pwmpp = 1.0; //0.00001; //0.0001; // 0.01001; + //fan2.pulsewidth(0.1); + //fan2.period(1.0 / 10.0); + //fan2.pulsewidth(2.0); + //fan2.period(20); + float pwmduty = 0.1f; + float unit_time = 10.0; + float total_period = 0.1; //0.7; //3.5; //0.8; + float num_cycle = (unit_time / total_period) + 1; + + while (pwmduty <= 1.1f) { + float on_time = total_period * pwmduty; + float off_time = total_period - on_time; + //gOled2.clearDisplay(); + gOled2.setTextCursor(1,20); + wait(0.1); + gOled2.printf("pwm=%3.3f\r\n", pwmduty); + wait(0.1); + gOled2.display(); + wait(0.1); + gOled2.display(); + wait(0.1); + pc.printf("pwm=%3.3f\r\n", pwmduty); + //wait(3.0); + fan2x = 1; + wait(0.15); + for (int x=0; x<= num_cycle; x++) { + + fan2x = 1; + wait(on_time); + fan2x = 0; + wait(off_time); + // accelerate to get the motor turning + // then slow down to the current speed; + //fan1 = 0.0; + //fan2 = 0.0; + //fan3 = 0.0; + //wait(0.02); + //fan1 = pwmduty; + //fan2 = pwmduty; + //fan3 = pwmduty; + //fan2 = pwmduty; + //fan2.period(pwmduty/100); + //fan2.period(pwmduty); + + } + pwmduty+= 0.1f; + } + //fan1 = 0.0; + //fan2 = 0.0; + //fan3 = 0.0; wait(3.0); } - - }