Diff: JroDDS.h

Revision:

5:6500be930b36

Parent:

4:de495ce256b8

Child:

6:aa70d2640f18

--- a/JroDDS.h	Tue Feb 10 14:28:42 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,98 +0,0 @@
-#ifndef        JRO_DDS
-#define        JRO_DDS
-
-#include "mbed.h"
-#include "SerialDriver.h"
-
-#define SPI_BITS 8
-#define SPI_MODE 0
-#define SPI_FREQ 10000
-
-#define DDS_CMD_RESET       0X10
-#define DDS_CMD_ENABLE_RF   0x11
-#define DDS_CMD_MULTIPLIER  0X12
-#define DDS_CMD_MODE        0x13
-#define DDS_CMD_FREQUENCY1  0X14
-#define DDS_CMD_FREQUENCY2  0x15
-#define DDS_CMD_PHASE1      0X16
-#define DDS_CMD_PHASE2      0x17
-#define DDS_CMD_AMPLITUDEI  0X18
-#define DDS_CMD_AMPLITUDEQ  0x19
-#define DDS_CMD_READ        0x8000
-
-class DDS{
-    private:
-        float           frequency;              // Work frequency in MHz
-        char            cr_multiplier;         // Multiplier 4- 20
-        char            cr_mode;                // Single, FSK, Ramped FSK, Chirp, BPSK
-        bool            cr_qdac_pwdn;           // Q DAC power down enable: 0 -> disable
-        bool            cr_ioupdclk;            // IO Update clock enable: 0 -> input
-        bool            cr_inv_sinc;            // Inverse sinc filter enable: 0 -> enable
-        bool            cr_osk_en;              // Enable AM: 0 -> disabled
-        bool            cr_osk_int;             // ext/int output shaped control: 0 -> external
-        bool            cr_msb_lsb;             // msb/lsb bit first: 0 -> MSB
-        bool            cr_sdo;                 // SDO pin active: 0 -> inactive
-        
-        SPI             *spi_device;
-        //DDS I/O
-        DigitalOut      *dds_mreset;
-        DigitalOut      *dds_outramp;
-        DigitalOut      *dds_sp_mode;
-        DigitalOut      *dds_cs;
-        DigitalOut      *dds_io_reset;
-        DigitalInOut    *dds_updclk;
-        
-        char            frequency1[6];
-        char            frequency2[6];
-        char            phase1[2];
-        char            phase2[2];       
-        char            amplitudeI[2];
-        char            amplitudeQ[2];
-        bool            rf_enabled;
-        
-        char*           cmd_answer;
-        unsigned long   cmd_answer_len;
-        
-        int __writeData(char addr, char ndata, const char* data);
-        char* __readData(char addr, char ndata);
-        int __writeDataAndVerify(char addr, char ndata, const char* wr_spi_data, SerialDriver *screen=NULL);
-        char* __getControlRegister();
-        int __writeControlRegister();
-        
-    public:
-        bool isConfig;
-        
-        DDS(SPI *spi_dev, DigitalOut *mreset, DigitalOut *outramp, DigitalOut *spmode, DigitalOut *cs, DigitalOut *ioreset, DigitalInOut *updclk);
-        int init();
-        int reset();
-        int scanIOUpdate();
-        int find();
-        char* rdMode();
-        char* rdMultiplier();
-        char* rdPhase1();
-        char* rdPhase2();
-        char* rdFrequency1();
-        char* rdFrequency2();
-        char* rdAmplitudeI();
-        char* rdAmplitudeQ();
-        int isRFEnabled();
-        int wrMode(char mode);
-        int wrMultiplier(char multiplier, float clock);
-        int wrPhase1(char* phase, SerialDriver *screen=NULL);
-        int wrPhase2(char* phase, SerialDriver *screen=NULL);
-        int wrFrequency1(char* freq, SerialDriver *screen=NULL);
-        int wrFrequency2(char* freq, SerialDriver *screen=NULL);
-        int wrAmplitudeI(char* amplitude, SerialDriver *screen=NULL);
-        int wrAmplitudeQ(char* amplitude, SerialDriver *screen=NULL);
-        int enableRF();
-        int disableRF();
-        int defaultSettings(SerialDriver *screen=NULL);
-        char* setCommand(unsigned short cmd, char* payload, unsigned long payload_len);
-        char* getCmdAnswer();
-        unsigned long getCmdAnswerLen();
-        int setAllDevice(char* payload, SerialDriver *screen=NULL);
-        bool wasInitialized();
-    
-};
-
-#endif
\ No newline at end of file