Diff: ltc26x6.h

Revision:

1:cab5535713ee

diff -r 91316dbef1b6 -r cab5535713ee ltc26x6.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ltc26x6.h	Mon Dec 06 05:17:03 2021 +0000
@@ -0,0 +1,128 @@
+/***************************************************************************//**
+ *   @file   ltc26x6.c
+ *   @brief  Header file of LTC2606,LTC2616,LTC2626 Driver.
+********************************************************************************
+ * Copyright 2021(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef _LTC26X6_H_
+#define _LTC26X6_H_
+
+#include <stdint.h>
+#include "platform_drivers.h"
+
+/******************************************************************************/
+/**************         MACROS AND CONSTANT DEFINITIONS          **************/
+/******************************************************************************/
+
+// LTC2606 I2C Address                 //  AD2       AD1       AD0
+// #define LTC2606_I2C_ADDRESS 0x10    //  LOW       LOW       LOW
+// #define LTC2606_I2C_ADDRESS 0x11    //  LOW       LOW       Float
+// #define LTC2606_I2C_ADDRESS 0x12    //  LOW       LOW       HIGH
+// #define LTC2606_I2C_ADDRESS 0x13    //  LOW       Float     LOW
+// #define LTC2606_I2C_ADDRESS 0x20    //  LOW       Float     Float
+// #define LTC2606_I2C_ADDRESS 0x21    //  LOW       Float     High 
+// #define LTC2606_I2C_ADDRESS 0x22    //  LOW       HIGH      LOW
+// #define LTC2606_I2C_ADDRESS 0x23    //  LOW       HIGH      Float
+// #define LTC2606_I2C_ADDRESS 0x30    //  LOW       High      HIGH
+// #define LTC2606_I2C_ADDRESS 0x31    //  Float     LOW       LOW
+// #define LTC2606_I2C_ADDRESS 0x32    //  Float     LOW       Float
+// #define LTC2606_I2C_ADDRESS 0x33    //  Float     LOW       HIGH
+// #define LTC2606_I2C_ADDRESS 0x40    //  Float     Float     LOW
+// #define LTC2606_I2C_ADDRESS 0x41    //  Float     Float     Float
+// #define LTC2606_I2C_ADDRESS 0x42    //  Float     Float     HIGH
+// #define LTC2606_I2C_ADDRESS 0x43    //  Float     High      LOW
+// #define LTC2606_I2C_ADDRESS 0x50    //  Float     High      Float
+// #define LTC2606_I2C_ADDRESS 0x51    //  Float     High      HIGH
+// #define LTC2606_I2C_ADDRESS 0x52    //  High      LOW       LOW
+// #define LTC2606_I2C_ADDRESS 0x53    //  High      LOW       Float
+// #define LTC2606_I2C_ADDRESS 0x60    //  High      LOW       High
+// #define LTC2606_I2C_ADDRESS 0x61    //  High      Float     LOW
+// #define LTC2606_I2C_ADDRESS 0x62    //  High      Float     Float
+// #define LTC2606_I2C_ADDRESS 0x63    //  High      Float     High
+// #define LTC2606_I2C_ADDRESS 0x70    //  High      High      LOW
+// #define LTC2606_I2C_ADDRESS 0x71    //  High      High      Float
+// #define LTC2606_I2C_ADDRESS 0x72    //  High      High      High
+
+
+#define LTC26X6_I2C_GLOBAL_ADDRESS      0x73            //  Global Address
+
+#define LTC26X6_UPDATE_COMMAND          0x10            // Command to update (and power up) LTC2606. Output voltage will be set to the value stored in the internal register by previous write command.
+#define LTC26X6_POWER_DOWN_COMMAND      0x40            // Command to power down the LTC2606.
+
+#define LTC26X6_WRITE_ADDRESS(x)        (x << 1)        // I2C addres shift, to make R/W bit LOW by default
+
+// Return error values
+#define LTC26X6_CODE_OVERFLOW           -2
+#define LTC26X6_CODE_UNDERFLOW          -3
+
+/*****************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+enum ltc26x6_write_command         // SDP-K1 GPIO number assignment
+{
+    write_command = 0x00,          // Command to update (and power up) LTC26X6. Output voltage will be set to the value stored in the internal register by previous write command.
+    write_update_command = 0x30    // Command to write and update (and power up) the LTC26X6. The output voltage will immediate change to the value being written to the internal register.
+};
+
+struct ltc26x6_dev {
+    /* I2C */
+    i2c_desc    *i2c_desc;
+    /* Device Settings */
+    uint8_t     resolution;     //LTC2606-16bits, LTC2616-14bit, LTC2626-12bits
+    float       vref;           //DAC reference voltage 
+    float       typical_offset; //DAC typical offset
+};
+
+struct ltc26x6_init_param {
+    /* I2C */
+    i2c_init_param  i2c_init;
+    /* Device Settings */
+    uint8_t     resolution;     //LTC2606-16bits, LTC2616-14bit, LTC2626-12bits
+    float       vref;           //DAC reference voltage 
+    float       typical_offset; //DAC typical offset
+};
+
+/******************************************************************************/
+/************************ Functions Declarations ******************************/
+/******************************************************************************/
+
+int32_t ltc26x6_init(struct ltc26x6_dev **device, struct ltc26x6_init_param init_param);
+int16_t ltc26x6_voltage_to_code(struct ltc26x6_dev *device, float dac_voltage, uint16_t *code);
+int32_t ltc26x6_write_code(struct ltc26x6_dev *dev, enum ltc26x6_write_command write_command, uint16_t dac_code);
+int32_t ltc26x6_power_down(struct ltc26x6_dev *dev);
+int32_t ltc26x6_power_up(struct ltc26x6_dev *dev);
+
+#endif // !_LTC26X6_H_
+
+