Julie Newcomb
added debugging
Fork of
BLE_nRF8001
by 
RedBearLab
Auto generated API documentation and code listings for BLE_nRF8001
| _aci_packed_ | aci_cmd_params_set_local_data_t |
| aci_cmd_params_change_timing_t | Structure for the ACI_CMD_CHANGE_TIMING ACI command parameters |
| aci_cmd_params_close_remote_pipe_t | Structure for the ACI_CMD_CLOSE_REMOTE_PIPE ACI command parameters |
| aci_cmd_params_connect_t | Structure for the ACI_CMD_CONNECT ACI command parameters |
| aci_cmd_params_disconnect_t | Structure for the ACI_CMD_DISCONNECT ACI command parameters |
| aci_cmd_params_dtm_cmd_t | Structure for the ACI_CMD_DTM_CMD ACI command parameters |
| aci_cmd_params_echo_t | Structure for the ACI_CMD_ECHO ACI command parameters |
| aci_cmd_params_open_remote_pipe_t | Structure for the ACI_CMD_OPEN_REMOTE_PIPE ACI command parameters |
| aci_cmd_params_send_data_t | Structure for the ACI_CMD_SEND_DATA ACI command parameters |
| aci_cmd_params_set_tx_power_t | Structure for the ACI_CMD_SET_TX_POWER ACI command parameters |
| aci_cmd_params_setup_t | Structure for the ACI_CMD_SETUP ACI command parameters |
| aci_cmd_params_test_t | Structure for the ACI_CMD_TEST ACI command parameters |
| aci_cmd_params_write_dynamic_data_t | Structure for the ACI_CMD_WRITE_DYNAMIC_DATA ACI command parameters |
| aci_cmd_t | Encapsulates a generic ACI command |
| aci_event_params_echo_t | Structure for the ACI_EVT_ECHO ACI event parameters |
| aci_evt_cmd_rsp_params_dtm_cmd_t | Structure for the ACI_EVT_CMD_RSP event with opcode=ACI_CMD_DTM_CMD event return parameters |
| aci_evt_cmd_rsp_params_get_battery_level_t | Structure for the ACI_EVT_CMD_RSP event with opcode=ACI_CMD_GET_BATTERY_LEVEL event return parameters |
| aci_evt_cmd_rsp_params_get_device_address_t | Structure for the ACI_EVT_CMD_RSP event with opcode=ACI_CMD_GET_DEVICE_ADDRESS event return parameters |
| aci_evt_cmd_rsp_params_get_device_version_t | Structure for the ACI_EVT_CMD_RSP event with opcode=ACI_CMD_GET_DEVICE_VERSION event return parameters |
| aci_evt_cmd_rsp_params_get_temperature_t | Structure for the ACI_EVT_CMD_RSP event with opcode=ACI_CMD_GET_TEMPERATURE event return parameters |
| aci_evt_cmd_rsp_read_dynamic_data_t | Structure for the ACI_EVT_CMD_RSP event with opcode=ACI_CMD_READ_DYNAMIC_DATA event return parameters |
| aci_evt_params_bond_status_t | Structure for the ACI_EVT_BOND_STATUS event return parameters |
| aci_evt_params_cmd_rsp_t | Structure for the ACI_EVT_CMD_RSP event return parameters |
| aci_evt_params_connected_t | Structure for the ACI_EVT_CONNECTED event return parameters |
| aci_evt_params_data_ack_t | Structure for the ACI_EVT_DATA_ACK event return parameters |
| aci_evt_params_data_credit_t | Structure for the ACI_EVT_DATA_CREDIT event return parameters |
| aci_evt_params_data_received_t | Structure for the ACI_EVT_DATA_RECEIVED event return parameters |
| aci_evt_params_device_started_t | Structure for the ACI_EVT_DEVICE_STARTED event return parameters |
| aci_evt_params_disconnected_t | Structure for the ACI_EVT_DISCONNECTED event return parameters |
| aci_evt_params_display_passkey_t | Structure for the ACI_EVT_DISPLAY_PASSKEY event return parameters |
| aci_evt_params_hw_error_t | Structure for the ACI_EVT_HW_ERROR event return parameters |
| aci_evt_params_key_request_t | Structure for the ACI_EVT_KEY_REQUEST event return parameters |
| aci_evt_params_pipe_error_t | Structure for the ACI_EVT_PIPE_ERROR event return parameters |
| aci_evt_params_pipe_status_t | Structure for the ACI_EVT_PIPE_STATUS event return parameters |
| aci_evt_params_timing_t | Structure for the ACI_EVT_TIMING event return parameters |
| aci_evt_t | Encapsulates a generic ACI event |
| aci_ll_conn_params_t | Link Layer Connection Parameters |
| aci_pins_t | Datatype for ACI pins and interface (polling/interrupt) |
| aci_queue_t | Data type for queue of data packets to send/receive from radio |
| aci_rx_data_t | Generic ACI receive data structure |
| aci_tx_data_t | Generic ACI transmit data structure |
Code
| aci.h [code] | |
| aci_cmds.h [code] | Definitions for the ACI (Application Control Interface) commands |
| aci_evts.h [code] | Definitions for the ACI (Application Control Interface) events |
| aci_protocol_defines.h [code] | |
| aci_queue.cpp [code] | Implementation of a circular queue for ACI data |
| aci_queue.h [code] | Interface for buffer |
| aci_setup.cpp [code] | |
| aci_setup.h [code] | |
| acilib.cpp [code] | Implementation of the acilib module |
| acilib.h [code] | Internal prototype for acilib module |
| acilib_defs.h [code] | Definitions for the acilib interfaces |
| acilib_if.h [code] | Prototypes for the acilib interfaces |
| acilib_types.h [code] | Type used in the acilib interfaces |
| Arduino.cpp [code] | |
| Arduino.h [code] | |
| ble_assert.h [code] | Declaration of assert() |
| BLEAttribute.cpp [code] | |
| BLEAttribute.h [code] | |
| BLECentral.cpp [code] | |
| BLECentral.h [code] | |
| BLECharacteristic.cpp [code] | |
| BLECharacteristic.h [code] | |
| BLEDescriptor.cpp [code] | |
| BLEDescriptor.h [code] | |
| BLEPeripheral.cpp [code] | |
| BLEPeripheral.h [code] | |
| BLEService.cpp [code] | |
| BLEService.h [code] | |
| BLETypedCharacteristic.h [code] | |
| BLETypedCharacteristics.cpp [code] | |
| BLETypedCharacteristics.h [code] | |
| BLEUuid.cpp [code] | |
| BLEUuid.h [code] | |
| boards.h [code] | Defines for the different Bluetooth low energy boards |
| dtm.h [code] | Internal prototype for acilib module |
| hal_aci_tl.cpp [code] | Implementation of the ACI transport layer module |
| hal_aci_tl.h [code] | Interface for hal_aci_tl |
| hal_platform.h [code] | |
| lib_aci.cpp [code] | Implementation of the ACI library |
| lib_aci.h [code] | ACI library |
| nRF8001.cpp [code] | |
| nRF8001.h [code] |