180718 HJM : 8 Count sensing data RF send, certTest, temp(cold)Test
Fork of EV-COG-AD3029LZ by
Diff: stm-spirit1-rf-driver/radio_spi.h
- Revision:
- 67:93bec0baf1de
- Parent:
- 34:edda6a7238ec
- Child:
- 78:65de72417cd3
diff -r 1e09d233280b -r 93bec0baf1de stm-spirit1-rf-driver/radio_spi.h --- a/stm-spirit1-rf-driver/radio_spi.h Wed Jul 05 14:02:16 2017 +0200 +++ b/stm-spirit1-rf-driver/radio_spi.h Thu Jul 06 11:13:31 2017 +0200 @@ -1,185 +1,185 @@ -/** -****************************************************************************** -* @file radio_spi.h -* @author System Lab - NOIDA -* @version V1.0.0 -* @date 15-May-2014 -* @brief This file contains all the functions prototypes for SPI . -****************************************************************************** -* @attention -* -* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* 1. Redistributions of source code must retain the above copyright notice, -* this list of conditions and the following disclaimer. -* 2. Redistributions in binary form must reproduce the above copyright notice, -* this list of conditions and the following disclaimer in the documentation -* and/or other materials provided with the distribution. -* 3. Neither the name of STMicroelectronics nor the names of its contributors -* may be used to endorse or promote products derived from this software -* without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -****************************************************************************** -*/ - - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __RADIO_SPI_H -#define __RADIO_SPI_H -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#ifdef USE_STM32L1XX_NUCLEO -// #include "stm32l1xx_hal.h" -#endif - -#ifdef USE_STM32F4XX_NUCLEO -// #include "stm32f4xx_hal.h" -#endif -#include "SPIRIT_Config.h" -#include "radio_spi.h" -// #include "spirit1-arch.h" - -/** - * @addtogroup BSP - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - - -/* Exported constants --------------------------------------------------------*/ - - -/* Exported macro ------------------------------------------------------------*/ - /* Define for SPIRIT1 board */ - #if !defined (USE_SPIRIT1_DEFAULT) - #define USE_SPIRIT1_DEFAULT -#endif - -/* SPIRIT1_Spi_config */ -/* SPI1 */ -#define RADIO_SPI SPI1 -#define RADIO_SPI_CLK_ENABLE() __SPI1_CLK_ENABLE() -#define RADIO_SPI_CLK_DISABLE() __SPI1_CLK_DISABLE() - -#define RADIO_SPI_MISO_PORT GPIOA -#define RADIO_SPI_MISO_PIN GPIO_PIN_6 -#define RADIO_SPI_MISO_CLOCK_ENABLE() __GPIOA_CLK_ENABLE() -#define RADIO_SPI_MISO_CLOCK_DISABLE() __GPIOA_CLK_DISABLE() - -#define RADIO_SPI_MOSI_PORT GPIOA -#define RADIO_SPI_MOSI_PIN GPIO_PIN_7 -#define RADIO_SPI_MOSI_CLOCK_ENABLE() __GPIOA_CLK_ENABLE() -#define RADIO_SPI_MOSI_CLOCK_DISABLE() __GPIOA_CLK_DISABLE() - - - -#ifdef USE_SPIRIT1_DEFAULT - -#define RADIO_SPI_SCK_PORT GPIOB -#define RADIO_SPI_SCK_PIN GPIO_PIN_3 -#define RADIO_SPI_SCK_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() -#define RADIO_SPI_SCK_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() - - -#define RADIO_SPI_CS_PORT GPIOB -#define RADIO_SPI_CS_PIN GPIO_PIN_6 -#define RADIO_SPI_CS_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() -#define RADIO_SPI_CS_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() - -#else - -#define RADIO_SPI_SCK_PORT GPIOB -#define RADIO_SPI_SCK_PIN GPIO_PIN_3 -#define RADIO_SPI_SCK_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() -#define RADIO_SPI_SCK_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() - - -#define RADIO_SPI_CS_PORT GPIOB -#define RADIO_SPI_CS_PIN GPIO_PIN_6 -#define RADIO_SPI_CS_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() -#define RADIO_SPI_CS_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() - -#endif - -/* Maximum Timeout values for flags waiting loops. These timeouts are not based - on accurate values, they just guarantee that the application will not remain - stuck if the SPI communication is corrupted. - You may modify these timeout values depending on CPU frequency and application - conditions (interrupts routines ...) */ -#define RADIO_SPI_TIMEOUT_MAX ((uint32_t)1000) - -/* SPIRIT1_Spi_config_Private_Defines */ -#define CS_TO_SCLK_DELAY 0x0200//FIXME what is this doing? -#define CLK_TO_CS_DELAY 0x0001 - -/* SPIRIT1_Spi_config_Headers */ -#define HEADER_WRITE_MASK 0x00 /*!< Write mask for header byte*/ -#define HEADER_READ_MASK 0x01 /*!< Read mask for header byte*/ -#define HEADER_ADDRESS_MASK 0x00 /*!< Address mask for header byte*/ -#define HEADER_COMMAND_MASK 0x80 /*!< Command mask for header byte*/ - -#define LINEAR_FIFO_ADDRESS 0xFF /*!< Linear FIFO address*/ - -/* SPIRIT1_Spi_config_Private_FunctionPrototypes */ -#define SPI_ENTER_CRITICAL() IRQ_DISABLE() -#define SPI_EXIT_CRITICAL() IRQ_ENABLE() - -/* SPIRIT1_Spi_config_Private_Functions */ -#define RadioSpiCSLow() HAL_GPIO_WritePin(RADIO_SPI_CS_PORT, RADIO_SPI_CS_PIN, GPIO_PIN_RESET) -#define RadioSpiCSHigh() HAL_GPIO_WritePin(RADIO_SPI_CS_PORT, RADIO_SPI_CS_PIN, GPIO_PIN_SET) - -/* SPIRIT1_Spi_config_Private_Macros */ -#define BUILT_HEADER(add_comm, w_r) (add_comm | w_r) /*!< macro to build the header byte*/ -#define WRITE_HEADER BUILT_HEADER(HEADER_ADDRESS_MASK, HEADER_WRITE_MASK) /*!< macro to build the write - header byte*/ -#define READ_HEADER BUILT_HEADER(HEADER_ADDRESS_MASK, HEADER_READ_MASK) /*!< macro to build the read - header byte*/ -#define COMMAND_HEADER BUILT_HEADER(HEADER_COMMAND_MASK, HEADER_WRITE_MASK) /*!< macro to build the command - header byte*/ - - - -/* Exported Variables --------------------------------------------------------*/ - - -/* Exported functions ------------------------------------------------------- */ -void SdkEvalSpiInit(void); -// void SpiCSGpioSetLevel(GPIO_PinState xState); -StatusBytes SdkEvalSpiWriteRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer); -StatusBytes SdkEvalSpiReadRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer); -StatusBytes SdkEvalSpiCommandStrobes(uint8_t cCommandCode); -StatusBytes SdkEvalSpiWriteFifo(uint8_t cNbBytes, uint8_t* pcBuffer); -StatusBytes SdkEvalSpiReadFifo(uint8_t cNbBytes, uint8_t* pcBuffer); - - -#ifdef __cplusplus -} -#endif -#endif /*__RADIO_SPI_H */ - -/** -* @} -*/ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/** +****************************************************************************** +* @file radio_spi.h +* @author System Lab - NOIDA +* @version V1.0.0 +* @date 15-May-2014 +* @brief This file contains all the functions prototypes for SPI . +****************************************************************************** +* @attention +* +* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> +* +* Redistribution and use in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __RADIO_SPI_H +#define __RADIO_SPI_H +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#ifdef USE_STM32L1XX_NUCLEO +// #include "stm32l1xx_hal.h" +#endif + +#ifdef USE_STM32F4XX_NUCLEO +// #include "stm32f4xx_hal.h" +#endif +#include "SPIRIT_Config.h" +#include "radio_spi.h" +// #include "spirit1-arch.h" + +/** + * @addtogroup BSP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + + +/* Exported constants --------------------------------------------------------*/ + + +/* Exported macro ------------------------------------------------------------*/ + /* Define for SPIRIT1 board */ + #if !defined (USE_SPIRIT1_DEFAULT) + #define USE_SPIRIT1_DEFAULT +#endif + +/* SPIRIT1_Spi_config */ +/* SPI1 */ +#define RADIO_SPI SPI1 +#define RADIO_SPI_CLK_ENABLE() __SPI1_CLK_ENABLE() +#define RADIO_SPI_CLK_DISABLE() __SPI1_CLK_DISABLE() + +#define RADIO_SPI_MISO_PORT GPIOA +#define RADIO_SPI_MISO_PIN GPIO_PIN_6 +#define RADIO_SPI_MISO_CLOCK_ENABLE() __GPIOA_CLK_ENABLE() +#define RADIO_SPI_MISO_CLOCK_DISABLE() __GPIOA_CLK_DISABLE() + +#define RADIO_SPI_MOSI_PORT GPIOA +#define RADIO_SPI_MOSI_PIN GPIO_PIN_7 +#define RADIO_SPI_MOSI_CLOCK_ENABLE() __GPIOA_CLK_ENABLE() +#define RADIO_SPI_MOSI_CLOCK_DISABLE() __GPIOA_CLK_DISABLE() + + + +#ifdef USE_SPIRIT1_DEFAULT + +#define RADIO_SPI_SCK_PORT GPIOB +#define RADIO_SPI_SCK_PIN GPIO_PIN_3 +#define RADIO_SPI_SCK_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() +#define RADIO_SPI_SCK_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() + + +#define RADIO_SPI_CS_PORT GPIOB +#define RADIO_SPI_CS_PIN GPIO_PIN_6 +#define RADIO_SPI_CS_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() +#define RADIO_SPI_CS_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() + +#else + +#define RADIO_SPI_SCK_PORT GPIOB +#define RADIO_SPI_SCK_PIN GPIO_PIN_3 +#define RADIO_SPI_SCK_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() +#define RADIO_SPI_SCK_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() + + +#define RADIO_SPI_CS_PORT GPIOB +#define RADIO_SPI_CS_PIN GPIO_PIN_6 +#define RADIO_SPI_CS_CLOCK_ENABLE() __GPIOB_CLK_ENABLE() +#define RADIO_SPI_CS_CLOCK_DISABLE() __GPIOB_CLK_DISABLE() + +#endif + +/* Maximum Timeout values for flags waiting loops. These timeouts are not based + on accurate values, they just guarantee that the application will not remain + stuck if the SPI communication is corrupted. + You may modify these timeout values depending on CPU frequency and application + conditions (interrupts routines ...) */ +#define RADIO_SPI_TIMEOUT_MAX ((uint32_t)1000) + +/* SPIRIT1_Spi_config_Private_Defines */ +#define CS_TO_SCLK_DELAY 0x0200//FIXME what is this doing? +#define CLK_TO_CS_DELAY 0x0001 + +/* SPIRIT1_Spi_config_Headers */ +#define HEADER_WRITE_MASK 0x00 /*!< Write mask for header byte*/ +#define HEADER_READ_MASK 0x01 /*!< Read mask for header byte*/ +#define HEADER_ADDRESS_MASK 0x00 /*!< Address mask for header byte*/ +#define HEADER_COMMAND_MASK 0x80 /*!< Command mask for header byte*/ + +#define LINEAR_FIFO_ADDRESS 0xFF /*!< Linear FIFO address*/ + +/* SPIRIT1_Spi_config_Private_FunctionPrototypes */ +#define SPI_ENTER_CRITICAL() IRQ_DISABLE() +#define SPI_EXIT_CRITICAL() IRQ_ENABLE() + +/* SPIRIT1_Spi_config_Private_Functions */ +#define RadioSpiCSLow() HAL_GPIO_WritePin(RADIO_SPI_CS_PORT, RADIO_SPI_CS_PIN, GPIO_PIN_RESET) +#define RadioSpiCSHigh() HAL_GPIO_WritePin(RADIO_SPI_CS_PORT, RADIO_SPI_CS_PIN, GPIO_PIN_SET) + +/* SPIRIT1_Spi_config_Private_Macros */ +#define BUILT_HEADER(add_comm, w_r) (add_comm | w_r) /*!< macro to build the header byte*/ +#define WRITE_HEADER BUILT_HEADER(HEADER_ADDRESS_MASK, HEADER_WRITE_MASK) /*!< macro to build the write + header byte*/ +#define READ_HEADER BUILT_HEADER(HEADER_ADDRESS_MASK, HEADER_READ_MASK) /*!< macro to build the read + header byte*/ +#define COMMAND_HEADER BUILT_HEADER(HEADER_COMMAND_MASK, HEADER_WRITE_MASK) /*!< macro to build the command + header byte*/ + + + +/* Exported Variables --------------------------------------------------------*/ + + +/* Exported functions ------------------------------------------------------- */ +void SdkEvalSpiInit(void); +// void SpiCSGpioSetLevel(GPIO_PinState xState); +StatusBytes SdkEvalSpiWriteRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer); +StatusBytes SdkEvalSpiReadRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer); +StatusBytes SdkEvalSpiCommandStrobes(uint8_t cCommandCode); +StatusBytes SdkEvalSpiWriteFifo(uint8_t cNbBytes, uint8_t* pcBuffer); +StatusBytes SdkEvalSpiReadFifo(uint8_t cNbBytes, uint8_t* pcBuffer); + + +#ifdef __cplusplus +} +#endif +#endif /*__RADIO_SPI_H */ + +/** +* @} +*/ + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/