Diff: jmPulse.h

Revision:

0:374d47623fab

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jmPulse.h	Sat Feb 12 16:41:07 2011 +0000
@@ -0,0 +1,92 @@
+/*************************************************************************
+ * @file	jmPulse.h
+ * @brief	Control pulse duration and repetition on digital mbed pins
+ *          Up to 8 pins can be controlled at the same time.
+ *          Single pulse or PWM like waveforms can be generated.
+ *             
+ * @version	1.1
+ * @date	Feb 12, 2011
+ */
+
+/*
+   * Module Command Line Interface 
+     Format: command name (arg info)min..max values [optional argument]
+     
+     pulse (pulse number)0..3 (pin number)0..432 (tOn)0..255 (tOff)0..255 (Cycles)[1..65535]
+      Ex: pulse 0 118 5 10 20     Pulse Port1 Bit 18 High for 5 tick units, then Low for 10 ticks and repeat 20 times,
+                                 then Return Message: GPPP0 id pin tOn tOff status
+
+      Ex: pulse 0 118 1 0	Set output Port1 Bit 18 High
+      Ex: pulse 0 118 0 1	Reset output Port1 Bit 18 Low
+	  Ex: pulse 0 118 0 0	Toggle Port1 Bit 18 state
+
+   * Module Events
+         On terminating pulse cycles, Return Message: GPPP0 id pin tOn tOff status
+
+   *  Module Feedback and Help messages may be enabled/disabled by Command Lines.
+         feedback (enable/disable)0..1
+         help (enable/disable)0..1
+*/
+
+#ifndef Pulsedef
+  #define Pulsedef 1
+
+  #define pulseQty 8 // number of pins for pulse
+
+  #include "LPC17xx.h"
+
+  // Module Data Structure
+  extern struct StructPulse{
+     uint16_t pin;
+	 uint8_t tOff;       
+     uint8_t tOn;
+	 uint8_t output;
+     uint8_t state;
+     uint16_t eggTimer;
+     uint16_t cycles;
+     uint32_t bitValue;
+	 LPC_GPIO_TypeDef * port;
+  }sPulse[pulseQty];
+
+
+#endif
+
+// Module Prototypes
+void PulseInit(void);
+void cli_Pulse(void);
+void PulseSM(void);
+void SetPulseParam(uint8_t pulseNum, uint16_t pin, uint8_t tOn, uint8_t tOff, uint16_t cycles);
+void cli_GPPP0(void);
+void rGPPP0(unsigned int id);
+void cli_PulseStop(void);
+
+//-------------------------- CLIG PLUGS --------------------
+// CLIG-INCLUDE
+/*
+#include "jmPulse.h"
+*/
+
+// CLIG-CMD
+/*
+pulse cli_Pulse();
+pulseInit PulseInit();
+pulseStop cli_PulseStop();
+GPPP0 cli_GPPP0();
+*/
+
+// CLIG-INIT
+/*
+   PulseInit();
+*/
+
+// CLIG-TIMER
+/*
+   // Module jmPulse
+   for(i=0;i<pulseQty;i++)if(sPulse[i].eggTimer>0)sPulse[i].eggTimer--;
+*/
+
+// CLIG-SM
+/*
+     PulseSM();
+*/
+