File content as of revision 1:78138640bd0e:

/* Author: Edoardo De Marchi 
 * Name: Test Code for MMA7660FC
 */
#include "mbed.h"
#include "MMA7660FC.h"

#define ADDR_MMA7660 0x98                   // I2C SLAVE ADDR MMA7660FC

MMA7660FC Acc(p28, p27, ADDR_MMA7660);      //sda, scl, Addr
Serial pc(USBTX, USBRX);


float G_VALUE[64] = {0, 0.047, 0.094, 0.141, 0.188, 0.234, 0.281, 0.328, 0.375, 0.422, 0.469, 0.516, 0.563, 0.609, 0.656, 0.703, 0.750, 0.797, 0.844, 0.891, 0.938, 0.984, 1.031, 1.078, 1.125, 1.172, 1.219, 1.266, 1.313, 1.359, 1.406, 1.453, -1.500, -1.453, -1.406, -1.359, -1.313, -1.266, -1.219, -1.172, -1.125, -1.078, -1.031, -0.984, -0.938, -0.891, -0.844, -0.797, -0.750, -0.703, -0.656, -0.609, -0.563, -0.516, -0.469, -0.422, -0.375, -0.328, -0.281, -0.234, -0.188, -0.141, -0.094, -0.047};



int main() 
{

    Acc.init();                                                     // Initialization
    pc.printf("Value reg 0x06: %#x\n", Acc.read_reg(0x06));         // Test the correct value of the register 0x06
    pc.printf("Value reg 0x08: %#x\n", Acc.read_reg(0x08));         // Test the correct value of the register 0x08
    pc.printf("Value reg 0x07: %#x\n\r", Acc.read_reg(0x07));       // Test the correct value of the register 0x07
           
    while(1)
    {   
        float x=0, y=0, z=0;
        
        Acc.read_Tilt(&x, &y, &z);                                     // Read the acceleration                    
        pc.printf("Tilt x: %2.2f degree \n", x);                    // Print the tilt orientation of the X axis
        pc.printf("Tilt y: %2.2f degree \n", y);                    // Print the tilt orientation of the Y axis
        pc.printf("Tilt z: %2.2f degree \n", z);                    // Print the tilt orientation of the Z axis

        wait_ms(100);

        pc.printf("x: %2.0f \n", Acc.read_z());                      // Print the X axis acceleration
        pc.printf("y: %2.0f \n", Acc.read_y());                      // Print the Y axis acceleration
        pc.printf("z: %2.0f \n", Acc.read_z());                      // Print the Z axis acceleration
        pc.printf("\n");
        wait(5);
          
    }
}