Fork of mbed-dev with the NUCLEO-L152RE target modified for use with the STM32L151RB (128 kB flash, 16 kB RAM).

Fork of mbed-dev by mbed official

To use this, remove the default "mbed" library and import this one instead. Target must be NUCLEO_L152RE.

common/I2CSlave.cpp

Committer:
bogdanm
Date:
2015-10-01
Revision:
0:9b334a45a8ff

File content as of revision 0:9b334a45a8ff:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "I2CSlave.h"

#if DEVICE_I2CSLAVE

namespace mbed {

I2CSlave::I2CSlave(PinName sda, PinName scl) : _i2c() {
    i2c_init(&_i2c, sda, scl);
    i2c_frequency(&_i2c, 100000);
    i2c_slave_mode(&_i2c, 1);
}

void I2CSlave::frequency(int hz) {
    i2c_frequency(&_i2c, hz);
}

void I2CSlave::address(int address) {
    int addr = (address & 0xFF) | 1;
    i2c_slave_address(&_i2c, 0, addr, 0);
}

int I2CSlave::receive(void) {
    return i2c_slave_receive(&_i2c);
}

int I2CSlave::read(char *data, int length) {
    return i2c_slave_read(&_i2c, data, length) != length;
}

int I2CSlave::read(void) {
    return i2c_byte_read(&_i2c, 0);
}

int I2CSlave::write(const char *data, int length) {
    return i2c_slave_write(&_i2c, data, length) != length;
}

int I2CSlave::write(int data) {
    return i2c_byte_write(&_i2c, data);
}

void I2CSlave::stop(void) {
    i2c_stop(&_i2c);
}

}

#endif