.
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_spi.h
- Revision:
- 0:88e313c910d0
diff -r 000000000000 -r 88e313c910d0 TARGET_NUCLEO_F072RB/stm32f0xx_hal_spi.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_spi.h Thu Aug 13 00:20:09 2015 +0000 @@ -0,0 +1,677 @@ + /** + ****************************************************************************** + * @file stm32f0xx_hal_spi.h + * @author MCD Application Team + * @version V1.2.0 + * @date 11-December-2014 + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_SPI_H +#define __STM32F0xx_HAL_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not . + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter must 0 or 1 or 2*/ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */ +}HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code + This parameter can be a value of @ref SPI_Error */ + +}SPI_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error SPI Error + * @{ + */ + #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ + #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */ + #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */ + #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */ + #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */ + #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ + #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */ + #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */ +/** + * @} + */ + +/** @defgroup SPI_mode SPI mode + * @{ + */ +#define SPI_MODE_SLAVE ((uint32_t)0x00000000) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \ + ((MODE) == SPI_MODE_MASTER)) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction + * @{ + */ +#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE + +#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ + ((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\ + ((MODE) == SPI_DIRECTION_1LINE)) + +#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES) + +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \ + ((MODE) == SPI_DIRECTION_1LINE)) +/** + * @} + */ + +/** @defgroup SPI_data_size SPI Data size + * @{ + */ +#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */ +#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */ +#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */ +#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */ +#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */ +#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */ +#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */ +#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */ +#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */ +#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */ +#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */ +#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */ +#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */ +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \ + ((DATASIZE) == SPI_DATASIZE_15BIT) || \ + ((DATASIZE) == SPI_DATASIZE_14BIT) || \ + ((DATASIZE) == SPI_DATASIZE_13BIT) || \ + ((DATASIZE) == SPI_DATASIZE_12BIT) || \ + ((DATASIZE) == SPI_DATASIZE_11BIT) || \ + ((DATASIZE) == SPI_DATASIZE_10BIT) || \ + ((DATASIZE) == SPI_DATASIZE_9BIT) || \ + ((DATASIZE) == SPI_DATASIZE_8BIT) || \ + ((DATASIZE) == SPI_DATASIZE_7BIT) || \ + ((DATASIZE) == SPI_DATASIZE_6BIT) || \ + ((DATASIZE) == SPI_DATASIZE_5BIT) || \ + ((DATASIZE) == SPI_DATASIZE_4BIT)) + +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */ +#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */ +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \ + ((CPOL) == SPI_POLARITY_HIGH)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */ +#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */ +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \ + ((CPHA) == SPI_PHASE_2EDGE)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000) +#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \ + ((NSS) == SPI_NSS_HARD_INPUT) || \ + ((NSS) == SPI_NSS_HARD_OUTPUT)) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS pulse management + * @{ + */ +#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLED ((uint32_t)0x00000000) + +#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \ + ((NSSP) == SPI_NSS_PULSE_DISABLED)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000) +#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008) +#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010) +#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018) +#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020) +#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028) +#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030) +#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \ + ((BIT) == SPI_FIRSTBIT_LSB)) +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI mode + * @{ + */ +#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000) +#define SPI_TIMODE_ENABLED SPI_CR2_FRF +#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \ + ((MODE) == SPI_TIMODE_ENABLED)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000) +#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN +#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \ + ((CALCULATION) == SPI_CRCCALCULATION_ENABLED)) +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE 0 +#define SPI_CRC_LENGTH_8BIT 1 +#define SPI_CRC_LENGTH_16BIT 2 +#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\ + ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_16BIT)) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0) + +/** + * @} + */ + +/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition + * @brief SPI Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + + +/** @defgroup SPI_Flag_definition SPI Flag definition + * @brief Flag definition + * Elements values convention: 0xXXXXYYYY + * - XXXX : Flag register Index + * - YYYY : Flag mask + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level + * @{ + */ +#define SPI_FTLVL_EMPTY ((uint32_t)0x0000) +#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800) +#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000) +#define SPI_FTLVL_FULL ((uint32_t)0x1800) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level + * @{ + */ +#define SPI_FRLVL_EMPTY ((uint32_t)0x0000) +#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200) +#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400) +#define SPI_FRLVL_FULL ((uint32_t)0x0600) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state + * @param __HANDLE__: SPI handle. + * @retval None + */ +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) + +/** @brief Enables or disables the specified SPI interrupts. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ : specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__))) + +/** @brief Checks if the specified SPI interrupt source is enabled or disabled. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ : specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified SPI flag is set or not. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ : specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the SPI CRCERR pending flag. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clears the SPI MODF pending flag. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg;\ + tmpreg = (__HANDLE__)->Instance->SR;\ + UNUSED(tmpreg); \ + (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\ + }while(0) + +/** @brief Clears the SPI OVR pending flag. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \ + __IO uint32_t tmpreg; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg); \ + } while(0) + +/** @brief Clears the SPI FRE pending flag. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg;\ + tmpreg = ((__HANDLE__)->Instance->SR);\ + UNUSED(tmpreg); \ + }while(0) +/** @brief Enables the SPI. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE) + +/** @brief Disables the SPI. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE)) + +/** @brief Sets the SPI transmit-only mode. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE) + +/** @brief Sets the SPI receive-only mode. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE)) + +/** @brief Resets the CRC calculation of the SPI. + * @param __HANDLE__ : specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\ + (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0) + + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_InitExtended(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +