.
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h
- Revision:
- 0:88e313c910d0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h Thu Aug 13 00:20:09 2015 +0000 @@ -0,0 +1,818 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_smartcard.h + * @author MCD Application Team + * @version V1.2.0 + * @date 11-December-2014 + * @brief Header file of SMARTCARD HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_SMARTCARD_H +#define __STM32F0xx_HAL_SMARTCARD_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types + * @{ + */ + + +/** + * @brief SMARTCARD Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */ + + uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits. + Only 1.5 stop bits are authorized in SmartCard mode. */ + + uint16_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref SMARTCARD_Parity + @note The parity is enabled by default (PCE is forced to 1). + Since the WordLength is forced to 8 bits + parity, M is + forced to 1 and the parity bit is the 9th bit. */ + + uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref SMARTCARD_Mode */ + + uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ + + uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SMARTCARD_Clock_Phase */ + + uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref SMARTCARD_Last_Bit */ + + uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */ + + uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */ + + uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */ + + uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled + in case of parity error. + This parameter can be a value of @ref SMARTCARD_NACK_Enable */ + + uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. + This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ + + uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: + it is used to implement the Character Wait Time (CWT) and + Block Wait Time (BWT). It is coded over 24 bits. */ + + uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. + This parameter can be any value from 0x0 to 0xFF */ + + uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in + receive and transmit mode). When set to 0, retransmission is + disabled. Otherwise, its maximum value is 7 (before signalling + an error) */ + +}SMARTCARD_InitTypeDef; + +/** + * @brief SMARTCARD advanced features initalization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several + advanced features may be initialized at the same time. This parameter + can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Tx_Inv */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Rx_Inv */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref SMARTCARD_Data_Inv */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref SMARTCARD_MSB_First */ +}SMARTCARD_AdvFeatureInitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ + HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ + HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */ +}HAL_SMARTCARD_StateTypeDef; + +/** + * @brief SMARTCARD clock sources + */ +typedef enum +{ + SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ + SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ + SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ + SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */ + SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */ +}SMARTCARD_ClockSourceTypeDef; + +/** + * @brief SMARTCARD handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ + + SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ + + uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ + + uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */ + + __IO uint32_t ErrorCode; /*!< SmartCard Error code + This parameter can be a value of @ref SMARTCARD_Error */ + +}SMARTCARD_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants + * @{ + */ + +/** @defgroup SMARTCARD_Error SMARTCARD Error + * @{ + */ +#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ +#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ +#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ +#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */ +#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ +#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ +#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020) /*!< Receiver TimeOut error */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length + * @{ + */ +#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) +#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) +/** + * @} + */ + +/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits + * @{ + */ +#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP)) +#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5) +/** + * @} + */ + +/** @defgroup SMARTCARD_Parity SMARTCARD Parity + * @{ + */ +#define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE) +#define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS)) +#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ + ((PARITY) == SMARTCARD_PARITY_ODD)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode + * @{ + */ +#define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE) +#define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE) +#define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE)) +#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity + * @{ + */ +#define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000) +#define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL) +#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase + * @{ + */ +#define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000) +#define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA) +#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit + * @{ + */ +#define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000) +#define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL) +#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \ + ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED)) +/** + * @} + */ + +/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method + * @{ + */ +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000) +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT) +#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \ + ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED)) +/** + * @} + */ + + +/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable + * @{ + */ +#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK) +#define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000) +#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \ + ((NACK) == SMARTCARD_NACK_DISABLED)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable + * @{ + */ +#define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000) +#define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN) +#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \ + ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type + * @{ + */ +#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) +#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) +#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) +#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) +#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) +#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) +#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) +#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ + SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ + SMARTCARD_ADVFEATURE_SWAP_INIT | \ + SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ + SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) +#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ + ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) +#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ + ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) +#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ + ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap + * @{ + */ +#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) +#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ + ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable + * @{ + */ +#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) +#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ + ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error + * @{ + */ +#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) +#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) +/** + * @} + */ + +/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first + * @{ + */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) +#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Flags SMARTCARD Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000) +#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000) +#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000) +#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000) +#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800) +#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080) +#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040) +#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020) +#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008) +#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004) +#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002) +#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001) +/** + * @} + */ + +/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ + +#define SMARTCARD_IT_PE ((uint16_t)0x0028) +#define SMARTCARD_IT_TXE ((uint16_t)0x0727) +#define SMARTCARD_IT_TC ((uint16_t)0x0626) +#define SMARTCARD_IT_RXNE ((uint16_t)0x0525) + +#define SMARTCARD_IT_ERR ((uint16_t)0x0060) +#define SMARTCARD_IT_ORE ((uint16_t)0x0300) +#define SMARTCARD_IT_NE ((uint16_t)0x0200) +#define SMARTCARD_IT_FE ((uint16_t)0x0100) + +#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B) +#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A) +/** + * @} + */ + + +/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags + * @{ + */ +#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ +#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ +#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters + * @{ + */ +#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ +#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ +#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ + ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + + +/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register + * @{ + */ +#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17) +/** + * @} + */ + +/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register + * @{ + */ +#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8) +/** + * @} + */ + +/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register + * @{ + */ +#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24) +/** + * @} + */ + +/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask + * @{ + */ +#define SMARTCARD_IT_MASK ((uint16_t)0x001F) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros + * @{ + */ + +/** @brief Reset SMARTCARD handle state + * @param __HANDLE__: SMARTCARD handle. + * @retval None + */ +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET) + +/** @brief Checks whether the specified Smartcard flag is set or not. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag + * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag + * @arg SMARTCARD_FLAG_BUSY: Busy flag + * @arg SMARTCARD_FLAG_EOBF: End of block flag + * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag + * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag + * @arg SMARTCARD_FLAG_TC: Transmission Complete flag + * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag + * @arg SMARTCARD_FLAG_ORE: OverRun Error flag + * @arg SMARTCARD_FLAG_NE: Noise Error flag + * @arg SMARTCARD_FLAG_FE: Framing Error flag + * @arg SMARTCARD_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enables the specified SmartCard interrupt. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_EOBF: End Of Block interrupt + * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Disables the specified SmartCard interrupt. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_EOBF: End Of Block interrupt + * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + + +/** @brief Checks whether the specified SmartCard interrupt has occurred or not. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __IT__: specifies the SMARTCARD interrupt to check. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_EOBF: End Of Block interrupt + * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_ORE: OverRun Error interrupt + * @arg SMARTCARD_IT_NE: Noise Error interrupt + * @arg SMARTCARD_IT_FE: Framing Error interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) + +/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __IT__: specifies the SMARTCARD interrupt source to check. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_EOBF: End Of Block interrupt + * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_ORE: OverRun Error interrupt + * @arg SMARTCARD_IT_NE: Noise Error interrupt + * @arg SMARTCARD_IT_FE: Framing Error interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK))) + + +/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg USART_CLEAR_PEF: Parity Error Clear Flag + * @arg USART_CLEAR_FEF: Framing Error Clear Flag + * @arg USART_CLEAR_NEF: Noise detected Clear Flag + * @arg USART_CLEAR_OREF: OverRun Error Clear Flag + * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag + * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag + * @arg USART_CLEAR_EOBF: End Of Block Clear Flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific SMARTCARD request flag. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral. + * @param __REQ__: specifies the request flag to set + * This parameter can be one of the following values: + * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request + * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request + * + * @retval None + */ +#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the USART associated to the SMARTCARD Handle + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable the USART associated to the SMARTCARD Handle + * @param __HANDLE__: specifies the SMARTCARD Handle. + * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Check the Baud rate range. The maximum Baud Rate is derived from the + * maximum clock on F0 (i.e. 48 MHz) divided by the oversampling used + * on the SMARTCARD (i.e. 16) + * @param __BAUDRATE__: Baud rate set by the configuration function. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001) + +/** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF. + * @param __LENGTH__: block length. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF) + +/** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout + * value is 0xFFFFFF. + * @param __TIMEOUTVALUE__: receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF) + +/** @brief Check the SMARTCARD autoretry counter value. The maximum number of + * retransmissions is 0x7. + * @param __COUNT__: number of retransmissions + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7) + +/** + * @} + */ + +/* Include SMARTCARD HAL Extended module */ +#include "stm32f0xx_hal_smartcard_ex.h" + + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/** @addtogroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/** @addtogroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard); +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_SMARTCARD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +