Jhon Plantikow / I2C_EEPROM

I2C_EEPROM

PwmOut.h@0:ac8863619623, 2015-08-13 (annotated)

Committer:
jhon309
Date:
Thu Aug 13 00:23:16 2015 +0000
Revision:
0:ac8863619623
I2C

Who changed what in which revision?

UserRevisionLine numberNew contents of line
jhon309 0:ac8863619623 1 /* mbed Microcontroller Library
jhon309 0:ac8863619623 2 * Copyright (c) 2006-2013 ARM Limited
jhon309 0:ac8863619623 3 *
jhon309 0:ac8863619623 4 * Licensed under the Apache License, Version 2.0 (the "License");
jhon309 0:ac8863619623 5 * you may not use this file except in compliance with the License.
jhon309 0:ac8863619623 6 * You may obtain a copy of the License at
jhon309 0:ac8863619623 7 *
jhon309 0:ac8863619623 8 * http://www.apache.org/licenses/LICENSE-2.0
jhon309 0:ac8863619623 9 *
jhon309 0:ac8863619623 10 * Unless required by applicable law or agreed to in writing, software
jhon309 0:ac8863619623 11 * distributed under the License is distributed on an "AS IS" BASIS,
jhon309 0:ac8863619623 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
jhon309 0:ac8863619623 13 * See the License for the specific language governing permissions and
jhon309 0:ac8863619623 14 * limitations under the License.
jhon309 0:ac8863619623 15 */
jhon309 0:ac8863619623 16 #ifndef MBED_PWMOUT_H
jhon309 0:ac8863619623 17 #define MBED_PWMOUT_H
jhon309 0:ac8863619623 18
jhon309 0:ac8863619623 19 #include "platform.h"
jhon309 0:ac8863619623 20
jhon309 0:ac8863619623 21 #if DEVICE_PWMOUT
jhon309 0:ac8863619623 22 #include "pwmout_api.h"
jhon309 0:ac8863619623 23
jhon309 0:ac8863619623 24 namespace mbed {
jhon309 0:ac8863619623 25
jhon309 0:ac8863619623 26 /** A pulse-width modulation digital output
jhon309 0:ac8863619623 27 *
jhon309 0:ac8863619623 28 * Example
jhon309 0:ac8863619623 29 * @code
jhon309 0:ac8863619623 30 * // Fade a led on.
jhon309 0:ac8863619623 31 * #include "mbed.h"
jhon309 0:ac8863619623 32 *
jhon309 0:ac8863619623 33 * PwmOut led(LED1);
jhon309 0:ac8863619623 34 *
jhon309 0:ac8863619623 35 * int main() {
jhon309 0:ac8863619623 36 * while(1) {
jhon309 0:ac8863619623 37 * led = led + 0.01;
jhon309 0:ac8863619623 38 * wait(0.2);
jhon309 0:ac8863619623 39 * if(led == 1.0) {
jhon309 0:ac8863619623 40 * led = 0;
jhon309 0:ac8863619623 41 * }
jhon309 0:ac8863619623 42 * }
jhon309 0:ac8863619623 43 * }
jhon309 0:ac8863619623 44 * @endcode
jhon309 0:ac8863619623 45 *
jhon309 0:ac8863619623 46 * @note
jhon309 0:ac8863619623 47 * On the LPC1768 and LPC2368, the PWMs all share the same
jhon309 0:ac8863619623 48 * period - if you change the period for one, you change it for all.
jhon309 0:ac8863619623 49 * Although routines that change the period maintain the duty cycle
jhon309 0:ac8863619623 50 * for its PWM, all other PWMs will require their duty cycle to be
jhon309 0:ac8863619623 51 * refreshed.
jhon309 0:ac8863619623 52 */
jhon309 0:ac8863619623 53 class PwmOut {
jhon309 0:ac8863619623 54
jhon309 0:ac8863619623 55 public:
jhon309 0:ac8863619623 56
jhon309 0:ac8863619623 57 /** Create a PwmOut connected to the specified pin
jhon309 0:ac8863619623 58 *
jhon309 0:ac8863619623 59 * @param pin PwmOut pin to connect to
jhon309 0:ac8863619623 60 */
jhon309 0:ac8863619623 61 PwmOut(PinName pin) {
jhon309 0:ac8863619623 62 pwmout_init(&_pwm, pin);
jhon309 0:ac8863619623 63 }
jhon309 0:ac8863619623 64
jhon309 0:ac8863619623 65 /** Set the ouput duty-cycle, specified as a percentage (float)
jhon309 0:ac8863619623 66 *
jhon309 0:ac8863619623 67 * @param value A floating-point value representing the output duty-cycle,
jhon309 0:ac8863619623 68 * specified as a percentage. The value should lie between
jhon309 0:ac8863619623 69 * 0.0f (representing on 0%) and 1.0f (representing on 100%).
jhon309 0:ac8863619623 70 * Values outside this range will be saturated to 0.0f or 1.0f.
jhon309 0:ac8863619623 71 */
jhon309 0:ac8863619623 72 void write(float value) {
jhon309 0:ac8863619623 73 pwmout_write(&_pwm, value);
jhon309 0:ac8863619623 74 }
jhon309 0:ac8863619623 75
jhon309 0:ac8863619623 76 /** Return the current output duty-cycle setting, measured as a percentage (float)
jhon309 0:ac8863619623 77 *
jhon309 0:ac8863619623 78 * @returns
jhon309 0:ac8863619623 79 * A floating-point value representing the current duty-cycle being output on the pin,
jhon309 0:ac8863619623 80 * measured as a percentage. The returned value will lie between
jhon309 0:ac8863619623 81 * 0.0f (representing on 0%) and 1.0f (representing on 100%).
jhon309 0:ac8863619623 82 *
jhon309 0:ac8863619623 83 * @note
jhon309 0:ac8863619623 84 * This value may not match exactly the value set by a previous <write>.
jhon309 0:ac8863619623 85 */
jhon309 0:ac8863619623 86 float read() {
jhon309 0:ac8863619623 87 return pwmout_read(&_pwm);
jhon309 0:ac8863619623 88 }
jhon309 0:ac8863619623 89
jhon309 0:ac8863619623 90 /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
jhon309 0:ac8863619623 91 *
jhon309 0:ac8863619623 92 * @note
jhon309 0:ac8863619623 93 * The resolution is currently in microseconds; periods smaller than this
jhon309 0:ac8863619623 94 * will be set to zero.
jhon309 0:ac8863619623 95 */
jhon309 0:ac8863619623 96 void period(float seconds) {
jhon309 0:ac8863619623 97 pwmout_period(&_pwm, seconds);
jhon309 0:ac8863619623 98 }
jhon309 0:ac8863619623 99
jhon309 0:ac8863619623 100 /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
jhon309 0:ac8863619623 101 */
jhon309 0:ac8863619623 102 void period_ms(int ms) {
jhon309 0:ac8863619623 103 pwmout_period_ms(&_pwm, ms);
jhon309 0:ac8863619623 104 }
jhon309 0:ac8863619623 105
jhon309 0:ac8863619623 106 /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
jhon309 0:ac8863619623 107 */
jhon309 0:ac8863619623 108 void period_us(int us) {
jhon309 0:ac8863619623 109 pwmout_period_us(&_pwm, us);
jhon309 0:ac8863619623 110 }
jhon309 0:ac8863619623 111
jhon309 0:ac8863619623 112 /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
jhon309 0:ac8863619623 113 */
jhon309 0:ac8863619623 114 void pulsewidth(float seconds) {
jhon309 0:ac8863619623 115 pwmout_pulsewidth(&_pwm, seconds);
jhon309 0:ac8863619623 116 }
jhon309 0:ac8863619623 117
jhon309 0:ac8863619623 118 /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
jhon309 0:ac8863619623 119 */
jhon309 0:ac8863619623 120 void pulsewidth_ms(int ms) {
jhon309 0:ac8863619623 121 pwmout_pulsewidth_ms(&_pwm, ms);
jhon309 0:ac8863619623 122 }
jhon309 0:ac8863619623 123
jhon309 0:ac8863619623 124 /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
jhon309 0:ac8863619623 125 */
jhon309 0:ac8863619623 126 void pulsewidth_us(int us) {
jhon309 0:ac8863619623 127 pwmout_pulsewidth_us(&_pwm, us);
jhon309 0:ac8863619623 128 }
jhon309 0:ac8863619623 129
jhon309 0:ac8863619623 130 #ifdef MBED_OPERATORS
jhon309 0:ac8863619623 131 /** A operator shorthand for write()
jhon309 0:ac8863619623 132 */
jhon309 0:ac8863619623 133 PwmOut& operator= (float value) {
jhon309 0:ac8863619623 134 write(value);
jhon309 0:ac8863619623 135 return *this;
jhon309 0:ac8863619623 136 }
jhon309 0:ac8863619623 137
jhon309 0:ac8863619623 138 PwmOut& operator= (PwmOut& rhs) {
jhon309 0:ac8863619623 139 write(rhs.read());
jhon309 0:ac8863619623 140 return *this;
jhon309 0:ac8863619623 141 }
jhon309 0:ac8863619623 142
jhon309 0:ac8863619623 143 /** An operator shorthand for read()
jhon309 0:ac8863619623 144 */
jhon309 0:ac8863619623 145 operator float() {
jhon309 0:ac8863619623 146 return read();
jhon309 0:ac8863619623 147 }
jhon309 0:ac8863619623 148 #endif
jhon309 0:ac8863619623 149
jhon309 0:ac8863619623 150 protected:
jhon309 0:ac8863619623 151 pwmout_t _pwm;
jhon309 0:ac8863619623 152 };
jhon309 0:ac8863619623 153
jhon309 0:ac8863619623 154 } // namespace mbed
jhon309 0:ac8863619623 155
jhon309 0:ac8863619623 156 #endif
jhon309 0:ac8863619623 157
jhon309 0:ac8863619623 158 #endif