Dataloger
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2s.h
- Revision:
- 0:666850d06c9f
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2s.h Thu Aug 20 00:37:14 2015 +0000 @@ -0,0 +1,453 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2s.h + * @author MCD Application Team + * @version V1.2.0 + * @date 11-December-2014 + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_I2S_H +#define __STM32F0xx_HAL_I2S_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F031x6) || defined(STM32F038xx) || \ + defined(STM32F051x8) || defined(STM32F058xx) || \ + defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \ + defined(STM32F042x6) || defined(STM32F048xx) || \ + defined(STM32F091xC) || defined(STM32F098xx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_PAUSE = 0x06, /*!< I2S pause state: used in case of DMA */ + HAL_I2S_STATE_ERROR = 0x07 /*!< I2S error state */ +}HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +typedef struct +{ + SPI_TypeDef *Instance; /*!< I2S registers base address */ + + I2S_InitTypeDef Init; /*!< I2S communication parameters */ + + uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received. + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ + + __IO uint32_t ErrorCode; /*!< I2S Error code + This parameter can be a value of @ref I2S_Error */ + +}I2S_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ +/** @defgroup I2S_Error I2S Error + * @{ + */ +#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ +#define HAL_I2S_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */ +#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */ +#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000004) /*!< UDR error */ +#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */ +#define HAL_I2S_ERROR_UNKNOW ((uint32_t)0x00000010) /*!< Unknow Error error */ +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000) +#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100) +#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200) +#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300) + +#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \ + ((MODE) == I2S_MODE_SLAVE_RX) || \ + ((MODE) == I2S_MODE_MASTER_TX)|| \ + ((MODE) == I2S_MODE_MASTER_RX)) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000) +#define I2S_STANDARD_MSB ((uint32_t)0x00000010) +#define I2S_STANDARD_LSB ((uint32_t)0x00000020) +#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030) +#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0) + +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \ + ((STANDARD) == I2S_STANDARD_MSB) || \ + ((STANDARD) == I2S_STANDARD_LSB) || \ + ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \ + ((STANDARD) == I2S_STANDARD_PCM_LONG)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000) +#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001) +#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003) +#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005) + +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \ + ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((FORMAT) == I2S_DATAFORMAT_24B) || \ + ((FORMAT) == I2S_DATAFORMAT_32B)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000) + +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \ + ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE)) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K ((uint32_t)192000) +#define I2S_AUDIOFREQ_96K ((uint32_t)96000) +#define I2S_AUDIOFREQ_48K ((uint32_t)48000) +#define I2S_AUDIOFREQ_44K ((uint32_t)44100) +#define I2S_AUDIOFREQ_32K ((uint32_t)32000) +#define I2S_AUDIOFREQ_22K ((uint32_t)22050) +#define I2S_AUDIOFREQ_16K ((uint32_t)16000) +#define I2S_AUDIOFREQ_11K ((uint32_t)11025) +#define I2S_AUDIOFREQ_8K ((uint32_t)8000) +#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \ + ((FREQ) <= I2S_AUDIOFREQ_192K)) || \ + ((FREQ) == I2S_AUDIOFREQ_DEFAULT)) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S Clock Polarity + * @{ + */ +#define I2S_CPOL_LOW ((uint32_t)0x00000000) +#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL) + +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \ + ((CPOL) == I2S_CPOL_HIGH)) +/** + * @} + */ + +/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition + * @{ + */ +#define I2S_IT_TXE SPI_CR2_TXEIE +#define I2S_IT_RXNE SPI_CR2_RXNEIE +#define I2S_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup I2S_Flag_definition I2S Flag definition + * @{ + */ +#define I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_RXNE SPI_SR_RXNE + +#define I2S_FLAG_UDR SPI_SR_UDR +#define I2S_FLAG_OVR SPI_SR_OVR +#define I2S_FLAG_FRE SPI_SR_FRE + +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_BSY SPI_SR_BSY +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__: I2S handle. + * @retval None + */ +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) + +/** @brief Enable or disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE) +#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= (uint16_t)(~SPI_I2SCFGR_I2SE)) + +/** @brief Enable or disable the specified I2S interrupts. + * @param __HANDLE__: specifies the I2S Handle. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__))) + +/** @brief Checks if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__: specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2S flag is set or not. + * @param __HANDLE__: specifies the I2S Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2S OVR pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ + __IO uint32_t tmpreg; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg); \ + }while(0) +/** @brief Clears the I2S UDR pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg;\ + tmpreg = ((__HANDLE__)->Instance->SR);\ + UNUSED(tmpreg); \ + }while(0) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); + + /* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined(STM32F031x6) || defined(STM32F038xx) || */ + /* defined(STM32F051x8) || defined(STM32F058xx) || */ + /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||*/ + /* defined(STM32F042x6) || defined(STM32F048xx) || */ + /* defined(STM32F091xC) || defined(STM32F098xx) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F0xx_HAL_I2S_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/