DHT11
serial_api.h@0:c52df770855b, 2015-08-13 (annotated)
- Committer:
- jhon309
- Date:
- Thu Aug 13 00:21:57 2015 +0000
- Revision:
- 0:c52df770855b
DHT11
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
jhon309 | 0:c52df770855b | 1 | /* mbed Microcontroller Library |
jhon309 | 0:c52df770855b | 2 | * Copyright (c) 2006-2013 ARM Limited |
jhon309 | 0:c52df770855b | 3 | * |
jhon309 | 0:c52df770855b | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
jhon309 | 0:c52df770855b | 5 | * you may not use this file except in compliance with the License. |
jhon309 | 0:c52df770855b | 6 | * You may obtain a copy of the License at |
jhon309 | 0:c52df770855b | 7 | * |
jhon309 | 0:c52df770855b | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
jhon309 | 0:c52df770855b | 9 | * |
jhon309 | 0:c52df770855b | 10 | * Unless required by applicable law or agreed to in writing, software |
jhon309 | 0:c52df770855b | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
jhon309 | 0:c52df770855b | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
jhon309 | 0:c52df770855b | 13 | * See the License for the specific language governing permissions and |
jhon309 | 0:c52df770855b | 14 | * limitations under the License. |
jhon309 | 0:c52df770855b | 15 | */ |
jhon309 | 0:c52df770855b | 16 | #ifndef MBED_SERIAL_API_H |
jhon309 | 0:c52df770855b | 17 | #define MBED_SERIAL_API_H |
jhon309 | 0:c52df770855b | 18 | |
jhon309 | 0:c52df770855b | 19 | #include "device.h" |
jhon309 | 0:c52df770855b | 20 | #include "buffer.h" |
jhon309 | 0:c52df770855b | 21 | #include "dma_api.h" |
jhon309 | 0:c52df770855b | 22 | |
jhon309 | 0:c52df770855b | 23 | #if DEVICE_SERIAL |
jhon309 | 0:c52df770855b | 24 | |
jhon309 | 0:c52df770855b | 25 | #define SERIAL_EVENT_TX_SHIFT (2) |
jhon309 | 0:c52df770855b | 26 | #define SERIAL_EVENT_RX_SHIFT (8) |
jhon309 | 0:c52df770855b | 27 | |
jhon309 | 0:c52df770855b | 28 | #define SERIAL_EVENT_TX_MASK (0x00FC) |
jhon309 | 0:c52df770855b | 29 | #define SERIAL_EVENT_RX_MASK (0x3F00) |
jhon309 | 0:c52df770855b | 30 | |
jhon309 | 0:c52df770855b | 31 | #define SERIAL_EVENT_ERROR (1 << 1) |
jhon309 | 0:c52df770855b | 32 | |
jhon309 | 0:c52df770855b | 33 | /** |
jhon309 | 0:c52df770855b | 34 | * @defgroup SerialTXEvents Serial TX Events Macros |
jhon309 | 0:c52df770855b | 35 | * |
jhon309 | 0:c52df770855b | 36 | * @{ |
jhon309 | 0:c52df770855b | 37 | */ |
jhon309 | 0:c52df770855b | 38 | #define SERIAL_EVENT_TX_COMPLETE (1 << (SERIAL_EVENT_TX_SHIFT + 0)) |
jhon309 | 0:c52df770855b | 39 | #define SERIAL_EVENT_TX_ALL (SERIAL_EVENT_TX_COMPLETE) |
jhon309 | 0:c52df770855b | 40 | /**@}*/ |
jhon309 | 0:c52df770855b | 41 | |
jhon309 | 0:c52df770855b | 42 | /** |
jhon309 | 0:c52df770855b | 43 | * @defgroup SerialRXEvents Serial RX Events Macros |
jhon309 | 0:c52df770855b | 44 | * |
jhon309 | 0:c52df770855b | 45 | * @{ |
jhon309 | 0:c52df770855b | 46 | */ |
jhon309 | 0:c52df770855b | 47 | #define SERIAL_EVENT_RX_COMPLETE (1 << (SERIAL_EVENT_RX_SHIFT + 0)) |
jhon309 | 0:c52df770855b | 48 | #define SERIAL_EVENT_RX_OVERRUN_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 1)) |
jhon309 | 0:c52df770855b | 49 | #define SERIAL_EVENT_RX_FRAMING_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 2)) |
jhon309 | 0:c52df770855b | 50 | #define SERIAL_EVENT_RX_PARITY_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 3)) |
jhon309 | 0:c52df770855b | 51 | #define SERIAL_EVENT_RX_OVERFLOW (1 << (SERIAL_EVENT_RX_SHIFT + 4)) |
jhon309 | 0:c52df770855b | 52 | #define SERIAL_EVENT_RX_CHARACTER_MATCH (1 << (SERIAL_EVENT_RX_SHIFT + 5)) |
jhon309 | 0:c52df770855b | 53 | #define SERIAL_EVENT_RX_ALL (SERIAL_EVENT_RX_OVERFLOW | SERIAL_EVENT_RX_PARITY_ERROR | \ |
jhon309 | 0:c52df770855b | 54 | SERIAL_EVENT_RX_FRAMING_ERROR | SERIAL_EVENT_RX_OVERRUN_ERROR | \ |
jhon309 | 0:c52df770855b | 55 | SERIAL_EVENT_RX_COMPLETE | SERIAL_EVENT_RX_CHARACTER_MATCH) |
jhon309 | 0:c52df770855b | 56 | /**@}*/ |
jhon309 | 0:c52df770855b | 57 | |
jhon309 | 0:c52df770855b | 58 | #define SERIAL_RESERVED_CHAR_MATCH (255) |
jhon309 | 0:c52df770855b | 59 | |
jhon309 | 0:c52df770855b | 60 | typedef enum { |
jhon309 | 0:c52df770855b | 61 | ParityNone = 0, |
jhon309 | 0:c52df770855b | 62 | ParityOdd = 1, |
jhon309 | 0:c52df770855b | 63 | ParityEven = 2, |
jhon309 | 0:c52df770855b | 64 | ParityForced1 = 3, |
jhon309 | 0:c52df770855b | 65 | ParityForced0 = 4 |
jhon309 | 0:c52df770855b | 66 | } SerialParity; |
jhon309 | 0:c52df770855b | 67 | |
jhon309 | 0:c52df770855b | 68 | typedef enum { |
jhon309 | 0:c52df770855b | 69 | RxIrq, |
jhon309 | 0:c52df770855b | 70 | TxIrq |
jhon309 | 0:c52df770855b | 71 | } SerialIrq; |
jhon309 | 0:c52df770855b | 72 | |
jhon309 | 0:c52df770855b | 73 | typedef enum { |
jhon309 | 0:c52df770855b | 74 | FlowControlNone, |
jhon309 | 0:c52df770855b | 75 | FlowControlRTS, |
jhon309 | 0:c52df770855b | 76 | FlowControlCTS, |
jhon309 | 0:c52df770855b | 77 | FlowControlRTSCTS |
jhon309 | 0:c52df770855b | 78 | } FlowControl; |
jhon309 | 0:c52df770855b | 79 | |
jhon309 | 0:c52df770855b | 80 | typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event); |
jhon309 | 0:c52df770855b | 81 | |
jhon309 | 0:c52df770855b | 82 | #if DEVICE_SERIAL_ASYNCH |
jhon309 | 0:c52df770855b | 83 | /** Asynch serial hal structure |
jhon309 | 0:c52df770855b | 84 | */ |
jhon309 | 0:c52df770855b | 85 | typedef struct { |
jhon309 | 0:c52df770855b | 86 | struct serial_s serial; /**< Target specific serial structure */ |
jhon309 | 0:c52df770855b | 87 | struct buffer_s tx_buff; /**< Tx buffer */ |
jhon309 | 0:c52df770855b | 88 | struct buffer_s rx_buff; /**< Rx buffer */ |
jhon309 | 0:c52df770855b | 89 | uint8_t char_match; /**< Character to be matched */ |
jhon309 | 0:c52df770855b | 90 | uint8_t char_found; /**< State of the matched character */ |
jhon309 | 0:c52df770855b | 91 | } serial_t; |
jhon309 | 0:c52df770855b | 92 | |
jhon309 | 0:c52df770855b | 93 | #else |
jhon309 | 0:c52df770855b | 94 | /** Non-asynch serial hal structure |
jhon309 | 0:c52df770855b | 95 | */ |
jhon309 | 0:c52df770855b | 96 | typedef struct serial_s serial_t; |
jhon309 | 0:c52df770855b | 97 | |
jhon309 | 0:c52df770855b | 98 | #endif |
jhon309 | 0:c52df770855b | 99 | |
jhon309 | 0:c52df770855b | 100 | #ifdef __cplusplus |
jhon309 | 0:c52df770855b | 101 | extern "C" { |
jhon309 | 0:c52df770855b | 102 | #endif |
jhon309 | 0:c52df770855b | 103 | |
jhon309 | 0:c52df770855b | 104 | /** |
jhon309 | 0:c52df770855b | 105 | * \defgroup GeneralSerial Serial Configuration Functions |
jhon309 | 0:c52df770855b | 106 | * @{ |
jhon309 | 0:c52df770855b | 107 | */ |
jhon309 | 0:c52df770855b | 108 | |
jhon309 | 0:c52df770855b | 109 | /** Initialize the serial peripheral. It sets the default parameters for serial |
jhon309 | 0:c52df770855b | 110 | * peripheral, and configure its specifieds pins. |
jhon309 | 0:c52df770855b | 111 | * |
jhon309 | 0:c52df770855b | 112 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 113 | * @param tx The TX pin |
jhon309 | 0:c52df770855b | 114 | * @param rx The RX pin |
jhon309 | 0:c52df770855b | 115 | */ |
jhon309 | 0:c52df770855b | 116 | void serial_init(serial_t *obj, PinName tx, PinName rx); |
jhon309 | 0:c52df770855b | 117 | |
jhon309 | 0:c52df770855b | 118 | /** Release the serial peripheral, not currently invoked. It requires further |
jhon309 | 0:c52df770855b | 119 | * resource management. |
jhon309 | 0:c52df770855b | 120 | * |
jhon309 | 0:c52df770855b | 121 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 122 | */ |
jhon309 | 0:c52df770855b | 123 | void serial_free(serial_t *obj); |
jhon309 | 0:c52df770855b | 124 | |
jhon309 | 0:c52df770855b | 125 | /** Configure the baud rate |
jhon309 | 0:c52df770855b | 126 | * |
jhon309 | 0:c52df770855b | 127 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 128 | * @param baudrate The baud rate to be configured |
jhon309 | 0:c52df770855b | 129 | */ |
jhon309 | 0:c52df770855b | 130 | void serial_baud(serial_t *obj, int baudrate); |
jhon309 | 0:c52df770855b | 131 | |
jhon309 | 0:c52df770855b | 132 | /** Configure the format. Set the number of bits, parity and the number of stop bits |
jhon309 | 0:c52df770855b | 133 | * |
jhon309 | 0:c52df770855b | 134 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 135 | * @param data_bits The number of data bits |
jhon309 | 0:c52df770855b | 136 | * @param parity The parity |
jhon309 | 0:c52df770855b | 137 | * @param stop_bits The number of stop bits |
jhon309 | 0:c52df770855b | 138 | */ |
jhon309 | 0:c52df770855b | 139 | void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits); |
jhon309 | 0:c52df770855b | 140 | |
jhon309 | 0:c52df770855b | 141 | /** The serial interrupt handler registration. |
jhon309 | 0:c52df770855b | 142 | * |
jhon309 | 0:c52df770855b | 143 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 144 | * @param handler The interrupt handler which will be invoked when interrupt fires. |
jhon309 | 0:c52df770855b | 145 | * @param id The SerialBase object |
jhon309 | 0:c52df770855b | 146 | */ |
jhon309 | 0:c52df770855b | 147 | void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id); |
jhon309 | 0:c52df770855b | 148 | |
jhon309 | 0:c52df770855b | 149 | /** Configure serial interrupt. This function is used for word-approach |
jhon309 | 0:c52df770855b | 150 | * |
jhon309 | 0:c52df770855b | 151 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 152 | * @param irq The serial IRQ type (RX or TX) |
jhon309 | 0:c52df770855b | 153 | * @param enable Set to non-zero to enable events, or zero to disable them |
jhon309 | 0:c52df770855b | 154 | */ |
jhon309 | 0:c52df770855b | 155 | void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable); |
jhon309 | 0:c52df770855b | 156 | |
jhon309 | 0:c52df770855b | 157 | /** Get character. This is a blocking call, waiting for a character |
jhon309 | 0:c52df770855b | 158 | * |
jhon309 | 0:c52df770855b | 159 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 160 | */ |
jhon309 | 0:c52df770855b | 161 | int serial_getc(serial_t *obj); |
jhon309 | 0:c52df770855b | 162 | |
jhon309 | 0:c52df770855b | 163 | /** Put a character. This is a blocking call, waiting for a peripheral to be available |
jhon309 | 0:c52df770855b | 164 | * for writing |
jhon309 | 0:c52df770855b | 165 | * |
jhon309 | 0:c52df770855b | 166 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 167 | * @param c The character to be sent |
jhon309 | 0:c52df770855b | 168 | */ |
jhon309 | 0:c52df770855b | 169 | void serial_putc(serial_t *obj, int c); |
jhon309 | 0:c52df770855b | 170 | |
jhon309 | 0:c52df770855b | 171 | /** Check if the serial peripheral is readable |
jhon309 | 0:c52df770855b | 172 | * |
jhon309 | 0:c52df770855b | 173 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 174 | * @return Non-zero value if a character can be read, 0 if nothing to read. |
jhon309 | 0:c52df770855b | 175 | */ |
jhon309 | 0:c52df770855b | 176 | int serial_readable(serial_t *obj); |
jhon309 | 0:c52df770855b | 177 | |
jhon309 | 0:c52df770855b | 178 | /** Check if the serial peripheral is writable |
jhon309 | 0:c52df770855b | 179 | * |
jhon309 | 0:c52df770855b | 180 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 181 | * @return Non-zero value if a character can be written, 0 otherwise. |
jhon309 | 0:c52df770855b | 182 | */ |
jhon309 | 0:c52df770855b | 183 | int serial_writable(serial_t *obj); |
jhon309 | 0:c52df770855b | 184 | |
jhon309 | 0:c52df770855b | 185 | /** Clear the serial peripheral |
jhon309 | 0:c52df770855b | 186 | * |
jhon309 | 0:c52df770855b | 187 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 188 | */ |
jhon309 | 0:c52df770855b | 189 | void serial_clear(serial_t *obj); |
jhon309 | 0:c52df770855b | 190 | |
jhon309 | 0:c52df770855b | 191 | /** Set the break |
jhon309 | 0:c52df770855b | 192 | * |
jhon309 | 0:c52df770855b | 193 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 194 | */ |
jhon309 | 0:c52df770855b | 195 | void serial_break_set(serial_t *obj); |
jhon309 | 0:c52df770855b | 196 | |
jhon309 | 0:c52df770855b | 197 | /** Clear the break |
jhon309 | 0:c52df770855b | 198 | * |
jhon309 | 0:c52df770855b | 199 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 200 | */ |
jhon309 | 0:c52df770855b | 201 | void serial_break_clear(serial_t *obj); |
jhon309 | 0:c52df770855b | 202 | |
jhon309 | 0:c52df770855b | 203 | /** Configure the TX pin for UART function. |
jhon309 | 0:c52df770855b | 204 | * |
jhon309 | 0:c52df770855b | 205 | * @param tx The pin used for TX |
jhon309 | 0:c52df770855b | 206 | */ |
jhon309 | 0:c52df770855b | 207 | void serial_pinout_tx(PinName tx); |
jhon309 | 0:c52df770855b | 208 | |
jhon309 | 0:c52df770855b | 209 | /** Configure the serial for the flow control. It sets flow control in the hardware |
jhon309 | 0:c52df770855b | 210 | * if a serial peripheral supports it, otherwise software emulation is used. |
jhon309 | 0:c52df770855b | 211 | * |
jhon309 | 0:c52df770855b | 212 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 213 | * @param type The type of the flow control. Look at the available FlowControl types. |
jhon309 | 0:c52df770855b | 214 | * @param rxflow The tx pin |
jhon309 | 0:c52df770855b | 215 | * @param txflow The rx pin |
jhon309 | 0:c52df770855b | 216 | */ |
jhon309 | 0:c52df770855b | 217 | void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow); |
jhon309 | 0:c52df770855b | 218 | |
jhon309 | 0:c52df770855b | 219 | #if DEVICE_SERIAL_ASYNCH |
jhon309 | 0:c52df770855b | 220 | |
jhon309 | 0:c52df770855b | 221 | /**@}*/ |
jhon309 | 0:c52df770855b | 222 | |
jhon309 | 0:c52df770855b | 223 | /** |
jhon309 | 0:c52df770855b | 224 | * \defgroup AsynchSerial Asynchronous Serial Hardware Abstraction Layer |
jhon309 | 0:c52df770855b | 225 | * @{ |
jhon309 | 0:c52df770855b | 226 | */ |
jhon309 | 0:c52df770855b | 227 | |
jhon309 | 0:c52df770855b | 228 | /** Begin asynchronous TX transfer. The used buffer is specified in the serial object, |
jhon309 | 0:c52df770855b | 229 | * tx_buff |
jhon309 | 0:c52df770855b | 230 | * |
jhon309 | 0:c52df770855b | 231 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 232 | * @param tx The buffer for sending |
jhon309 | 0:c52df770855b | 233 | * @param tx_length The number of words to transmit |
jhon309 | 0:c52df770855b | 234 | * @param tx_width The bit width of buffer word |
jhon309 | 0:c52df770855b | 235 | * @param handler The serial handler |
jhon309 | 0:c52df770855b | 236 | * @param event The logical OR of events to be registered |
jhon309 | 0:c52df770855b | 237 | * @param hint A suggestion for how to use DMA with this transfer |
jhon309 | 0:c52df770855b | 238 | * @return Returns number of data transfered, or 0 otherwise |
jhon309 | 0:c52df770855b | 239 | */ |
jhon309 | 0:c52df770855b | 240 | int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint); |
jhon309 | 0:c52df770855b | 241 | |
jhon309 | 0:c52df770855b | 242 | /** Begin asynchronous RX transfer (enable interrupt for data collecting) |
jhon309 | 0:c52df770855b | 243 | * The used buffer is specified in the serial object - rx_buff |
jhon309 | 0:c52df770855b | 244 | * |
jhon309 | 0:c52df770855b | 245 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 246 | * @param rx The buffer for sending |
jhon309 | 0:c52df770855b | 247 | * @param rx_length The number of words to transmit |
jhon309 | 0:c52df770855b | 248 | * @param rx_width The bit width of buffer word |
jhon309 | 0:c52df770855b | 249 | * @param handler The serial handler |
jhon309 | 0:c52df770855b | 250 | * @param event The logical OR of events to be registered |
jhon309 | 0:c52df770855b | 251 | * @param handler The serial handler |
jhon309 | 0:c52df770855b | 252 | * @param char_match A character in range 0-254 to be matched |
jhon309 | 0:c52df770855b | 253 | * @param hint A suggestion for how to use DMA with this transfer |
jhon309 | 0:c52df770855b | 254 | */ |
jhon309 | 0:c52df770855b | 255 | void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint); |
jhon309 | 0:c52df770855b | 256 | |
jhon309 | 0:c52df770855b | 257 | /** Attempts to determine if the serial peripheral is already in use for TX |
jhon309 | 0:c52df770855b | 258 | * |
jhon309 | 0:c52df770855b | 259 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 260 | * @return Non-zero if the RX transaction is ongoing, 0 otherwise |
jhon309 | 0:c52df770855b | 261 | */ |
jhon309 | 0:c52df770855b | 262 | uint8_t serial_tx_active(serial_t *obj); |
jhon309 | 0:c52df770855b | 263 | |
jhon309 | 0:c52df770855b | 264 | /** Attempts to determine if the serial peripheral is already in use for RX |
jhon309 | 0:c52df770855b | 265 | * |
jhon309 | 0:c52df770855b | 266 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 267 | * @return Non-zero if the RX transaction is ongoing, 0 otherwise |
jhon309 | 0:c52df770855b | 268 | */ |
jhon309 | 0:c52df770855b | 269 | uint8_t serial_rx_active(serial_t *obj); |
jhon309 | 0:c52df770855b | 270 | |
jhon309 | 0:c52df770855b | 271 | /** The asynchronous TX and RX handler. |
jhon309 | 0:c52df770855b | 272 | * |
jhon309 | 0:c52df770855b | 273 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 274 | * @return Returns event flags if a RX transfer termination condition was met or 0 otherwise |
jhon309 | 0:c52df770855b | 275 | */ |
jhon309 | 0:c52df770855b | 276 | int serial_irq_handler_asynch(serial_t *obj); |
jhon309 | 0:c52df770855b | 277 | |
jhon309 | 0:c52df770855b | 278 | /** Abort the ongoing TX transaction. It disables the enabled interupt for TX and |
jhon309 | 0:c52df770855b | 279 | * flush TX hardware buffer if TX FIFO is used |
jhon309 | 0:c52df770855b | 280 | * |
jhon309 | 0:c52df770855b | 281 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 282 | */ |
jhon309 | 0:c52df770855b | 283 | void serial_tx_abort_asynch(serial_t *obj); |
jhon309 | 0:c52df770855b | 284 | |
jhon309 | 0:c52df770855b | 285 | /** Abort the ongoing RX transaction It disables the enabled interrupt for RX and |
jhon309 | 0:c52df770855b | 286 | * flush RX hardware buffer if RX FIFO is used |
jhon309 | 0:c52df770855b | 287 | * |
jhon309 | 0:c52df770855b | 288 | * @param obj The serial object |
jhon309 | 0:c52df770855b | 289 | */ |
jhon309 | 0:c52df770855b | 290 | void serial_rx_abort_asynch(serial_t *obj); |
jhon309 | 0:c52df770855b | 291 | |
jhon309 | 0:c52df770855b | 292 | /**@}*/ |
jhon309 | 0:c52df770855b | 293 | |
jhon309 | 0:c52df770855b | 294 | #endif |
jhon309 | 0:c52df770855b | 295 | |
jhon309 | 0:c52df770855b | 296 | #ifdef __cplusplus |
jhon309 | 0:c52df770855b | 297 | } |
jhon309 | 0:c52df770855b | 298 | #endif |
jhon309 | 0:c52df770855b | 299 | |
jhon309 | 0:c52df770855b | 300 | #endif |
jhon309 | 0:c52df770855b | 301 | |
jhon309 | 0:c52df770855b | 302 | #endif |