John Durrell
Adapted from Peter Dresche's original for Waveshare 2.8inch TFT Touch Shield Board and Mbed 6. RGB order reversed by changing reg 16 commands, spi write code adjusted as there is no reset pin but there is data command pin. Wait commands changed for new thread_sleep style, Stream class explicitly included. Library to control a QVGA TFT connected to SPI. You can use printf to print text The lib can handle different fonts, draw lines, circles, rect and bmp
Diff: SPI_TFT.cpp
- Revision:
- 8:65a4de035c3c
- Parent:
- 7:e753bb62eeb9
- Child:
- 9:a63fd1ad41b0
--- a/SPI_TFT.cpp Fri Oct 12 10:03:42 2012 +0000
+++ b/SPI_TFT.cpp Sun Feb 03 00:28:19 2013 +0000
@@ -1,1063 +1,1166 @@
-/* mbed library for 240*320 pixel display TFT based on HX8347D LCD Controller
- * Copyright (c) 2011 Peter Drescher - DC2PD
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-
-// fix bmp padding for Bitmap function
-// speed up pixel
-// 30.12.11 fix cls
-// 11.03.12 use DMA to speed up
-// 15.03.12 use SSEL for TFT CS to enable DMA Register writes
-// 06.04.12 fix SSEL CS problem
-// 06.04.12 use direct access to the spi register to speed up the library.
-// 11.09.12 switch back to using io pin as cs to avoid problems with SSEL CS.
-// 21.09.12 fix Bug in BMP_16
-// 11.10.12 patch from Hans Bergles to get SPI1 working again
-
-#include "SPI_TFT.h"
-#include "mbed.h"
-
-
-#define BPP 16 // Bits per pixel
-
-
-//extern Serial pc;
-//extern DigitalOut xx; // debug !!
-
-SPI_TFT::SPI_TFT(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName reset, const char *name)
- : _spi(mosi, miso, sclk), _cs(cs), _reset(reset),GraphicsDisplay(name)
-{
- orientation = 0;
- char_x = 0;
- if (mosi == p11 || mosi == P0_18) spi_port = 0; // we must know the used SPI port to setup the DMA
- else spi_port = 1;
- tft_reset();
-}
-
-int SPI_TFT::width()
-{
- if (orientation == 0 || orientation == 2) return 240;
- else return 320;
-}
-
-
-int SPI_TFT::height()
-{
- if (orientation == 0 || orientation == 2) return 320;
- else return 240;
-}
-
-
-void SPI_TFT::set_orientation(unsigned int o)
-{
- orientation = o;
- switch (orientation) {
- case 0:
- wr_reg(0x16, 0x08);
- break;
- case 1:
- wr_reg(0x16, 0x68);
- break;
- case 2:
- wr_reg(0x16, 0xC8);
- break;
- case 3:
- wr_reg(0x16, 0xA8);
- break;
- }
- WindowMax();
-}
-
-
-// write command to tft register
-
-void SPI_TFT::wr_cmd(unsigned char cmd)
-{
- unsigned short spi_d;
- spi_d = 0x7000 | cmd ;
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->DR = spi_d;
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- } else {
- LPC_SSP1->DR = spi_d;
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- }
- _cs = 1;
-}
-
-
-
-void SPI_TFT::wr_dat(unsigned char dat)
-{
- unsigned short spi_d;
- spi_d = 0x7200 | dat;
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->DR = spi_d;
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- } else {
- LPC_SSP1->DR = spi_d;
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- }
- _cs = 1;
-}
-
-
-
-// the HX8347-D controller do not use the MISO (SDO) Signal.
-// This is a bug - ?
-// A read will return 0 at the moment
-
-unsigned short SPI_TFT::rd_dat (void)
-{
- unsigned short val = 0;
-
- //val = _spi.write(0x73ff); /* Dummy read 1 */
- //val = _spi.write(0x0000); /* Read D8..D15 */
- return (val);
-}
-
-void SPI_TFT::wr_reg (unsigned char reg, unsigned char val)
-{
- wr_cmd(reg);
- wr_dat(val);
-}
-
-unsigned short SPI_TFT::rd_reg (unsigned char reg)
-{
- wr_cmd(reg);
- return(rd_dat());
-}
-
-void SPI_TFT::tft_reset()
-{
- //static unsigned short driverCode;
- _spi.format(16,3); // 16 bit spi mode 3
- _spi.frequency(48000000); // 48 Mhz SPI clock
- _cs = 1; // cs high
- _reset = 0; // display reset
-
- wait_us(50);
- _reset = 1; // end reset
- wait_ms(5);
-
- /* Start Initial Sequence ----------------------------------------------------*/
- wr_reg(0xEA, 0x00); /* Reset Power Control 1 */
- wr_reg(0xEB, 0x20); /* Power Control 2 */
- wr_reg(0xEC, 0x0C); /* Power Control 3 */
- wr_reg(0xED, 0xC4); /* Power Control 4 */
- wr_reg(0xE8, 0x40); /* Source OPON_N */
- wr_reg(0xE9, 0x38); /* Source OPON_I */
- wr_reg(0xF1, 0x01); /* */
- wr_reg(0xF2, 0x10); /* */
- wr_reg(0x27, 0xA3); /* Display Control 2 */
-
- /* Power On sequence ---------------------------------------------------------*/
- wr_reg(0x1B, 0x1B); /* Power Control 2 */
- wr_reg(0x1A, 0x01); /* Power Control 1 */
- wr_reg(0x24, 0x2F); /* Vcom Control 2 */
- wr_reg(0x25, 0x57); /* Vcom Control 3 */
- wr_reg(0x23, 0x8D); /* Vcom Control 1 */
-
- /* Gamma settings -----------------------------------------------------------*/
- wr_reg(0x40,0x00); //
- wr_reg(0x41,0x00); //
- wr_reg(0x42,0x01); //
- wr_reg(0x43,0x13); //
- wr_reg(0x44,0x10); //
- wr_reg(0x45,0x26); //
- wr_reg(0x46,0x08); //
- wr_reg(0x47,0x51); //
- wr_reg(0x48,0x02); //
- wr_reg(0x49,0x12); //
- wr_reg(0x4A,0x18); //
- wr_reg(0x4B,0x19); //
- wr_reg(0x4C,0x14); //
- wr_reg(0x50,0x19); //
- wr_reg(0x51,0x2F); //
- wr_reg(0x52,0x2C); //
- wr_reg(0x53,0x3E); //
- wr_reg(0x54,0x3F); //
- wr_reg(0x55,0x3F); //
- wr_reg(0x56,0x2E); //
- wr_reg(0x57,0x77); //
- wr_reg(0x58,0x0B); //
- wr_reg(0x59,0x06); //
- wr_reg(0x5A,0x07); //
- wr_reg(0x5B,0x0D); //
- wr_reg(0x5C,0x1D); //
- wr_reg(0x5D,0xCC); //
-
- /* Power + Osc ---------------------------------------------------------------*/
- wr_reg(0x18, 0x0036); /* OSC Control 1 */
- wr_reg(0x19, 0x0001); /* OSC Control 2 */
- wr_reg(0x01, 0x0000); /* Display Mode Control */
- wr_reg(0x1F, 0x0088); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
- wr_reg(0x1F, 0x0080); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
- wr_reg(0x1F, 0x0090); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
- wr_reg(0x1F, 0x00D0); /* Power Control 6 */
- wait_ms(5); /* Delay 5 ms */
-
- wr_reg(0x17, 0x0005); /* Colmod 16Bit/Pixel */
-
- wr_reg(0x36, 0x0000); /* Panel Characteristic */
- wr_reg(0x28, 0x0038); /* Display Control 3 */
- wait_ms(40);
- wr_reg(0x28, 0x003C); /* Display Control 3 */
- switch (orientation) {
- case 0:
- wr_reg(0x16, 0x0008);
- break;
- case 1:
- wr_reg(0x16, 0x0068);
- break;
- case 2:
- wr_reg(0x16, 0x00C8);
- break;
- case 3:
- wr_reg(0x16, 0x00A8);
- break;
- }
-
- // setup DMA channel 0
- // Power up the GPDMA.
- LPC_SC->PCONP |= (1UL << 29);
- LPC_GPDMA->DMACConfig = 1; // enable DMA controller
- // Reset the Interrupt status
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCLLI = 0;
-
- WindowMax ();
-}
-
-
-void SPI_TFT::pixel(int x, int y, int color)
-{
- unsigned char u,l;
- wr_reg(0x03, (x >> 0));
- wr_reg(0x02, (x >> 8));
- wr_reg(0x07, (y >> 0));
- wr_reg(0x06, (y >> 8));
- wr_cmd(0x22);
- u = color >> 8;
- l = color & 0xff;
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->DR = u; // high byte
- LPC_SSP0->DR = l; // low byte
- LPC_SSP0->CR0 |= 0x08UL; // set back to 16 bit
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- } else {
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->DR = u;
- LPC_SSP1->DR = l;
- LPC_SSP1->CR0 |= 0x08UL; // set back to 16 bit
- // we have to wait for SPI IDLE to set CS back to high
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- }
- _cs = 1;
-}
-
-
-void SPI_TFT::window (unsigned int x, unsigned int y, unsigned int w, unsigned int h)
-{
- wr_reg(0x03, x );
- wr_reg(0x02, (x >> 8));
- wr_reg(0x05, x+w-1 );
- wr_reg(0x04, (x+w-1 >> 8));
- wr_reg(0x07, y );
- wr_reg(0x06, ( y >> 8));
- wr_reg(0x09, ( y+h-1 ));
- wr_reg(0x08, ( y+h-1 >> 8));
-}
-
-
-void SPI_TFT::WindowMax (void)
-{
- window (0, 0, width(), height());
-}
-
-
-void SPI_TFT::cls (void)
-{
- //unsigned int i
-
- int pixel = ( width() * height());
- int dma_count;
- int color = _background;
- WindowMax();
- wr_cmd(0x22);
-
- // The SSEL signal is held low until the spi FIFO is emty.
- // We have to lower the SPI clock for the 8 bit start to get the spi running
- // until the next data word
-
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
-
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start byte
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- // start DMA
- do {
- if (pixel > 4095) {
- dma_count = 4095;
- pixel = pixel - 4095;
- } else {
- dma_count = pixel;
- pixel = 0;
- }
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1; // DMA request
-
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- } while (pixel > 0);
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((0x0010 & LPC_SSP0->SR) == 0x10); // SPI FIFO not empty
- /* disable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x0;
- } else {
- do {
- } while ((0x0010 & LPC_SSP1->SR) == 0x10); // SPI FIFO not empty
- /* disable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x0;
- }
- _cs = 1;
-}
-
-
-void SPI_TFT::circle(int x0, int y0, int r, int color)
-{
-
- int draw_x0, draw_y0;
- int draw_x1, draw_y1;
- int draw_x2, draw_y2;
- int draw_x3, draw_y3;
- int draw_x4, draw_y4;
- int draw_x5, draw_y5;
- int draw_x6, draw_y6;
- int draw_x7, draw_y7;
- int xx, yy;
- int di;
- //WindowMax();
- if (r == 0) { /* no radius */
- return;
- }
-
- draw_x0 = draw_x1 = x0;
- draw_y0 = draw_y1 = y0 + r;
- if (draw_y0 < height()) {
- pixel(draw_x0, draw_y0, color); /* 90 degree */
- }
-
- draw_x2 = draw_x3 = x0;
- draw_y2 = draw_y3 = y0 - r;
- if (draw_y2 >= 0) {
- pixel(draw_x2, draw_y2, color); /* 270 degree */
- }
-
- draw_x4 = draw_x6 = x0 + r;
- draw_y4 = draw_y6 = y0;
- if (draw_x4 < width()) {
- pixel(draw_x4, draw_y4, color); /* 0 degree */
- }
-
- draw_x5 = draw_x7 = x0 - r;
- draw_y5 = draw_y7 = y0;
- if (draw_x5>=0) {
- pixel(draw_x5, draw_y5, color); /* 180 degree */
- }
-
- if (r == 1) {
- return;
- }
-
- di = 3 - 2*r;
- xx = 0;
- yy = r;
- while (xx < yy) {
-
- if (di < 0) {
- di += 4*xx + 6;
- } else {
- di += 4*(xx - yy) + 10;
- yy--;
- draw_y0--;
- draw_y1--;
- draw_y2++;
- draw_y3++;
- draw_x4--;
- draw_x5++;
- draw_x6--;
- draw_x7++;
- }
- xx++;
- draw_x0++;
- draw_x1--;
- draw_x2++;
- draw_x3--;
- draw_y4++;
- draw_y5++;
- draw_y6--;
- draw_y7--;
-
- if ( (draw_x0 <= width()) && (draw_y0>=0) ) {
- pixel(draw_x0, draw_y0, color);
- }
-
- if ( (draw_x1 >= 0) && (draw_y1 >= 0) ) {
- pixel(draw_x1, draw_y1, color);
- }
-
- if ( (draw_x2 <= width()) && (draw_y2 <= height()) ) {
- pixel(draw_x2, draw_y2, color);
- }
-
- if ( (draw_x3 >=0 ) && (draw_y3 <= height()) ) {
- pixel(draw_x3, draw_y3, color);
- }
-
- if ( (draw_x4 <= width()) && (draw_y4 >= 0) ) {
- pixel(draw_x4, draw_y4, color);
- }
-
- if ( (draw_x5 >= 0) && (draw_y5 >= 0) ) {
- pixel(draw_x5, draw_y5, color);
- }
- if ( (draw_x6 <=width()) && (draw_y6 <= height()) ) {
- pixel(draw_x6, draw_y6, color);
- }
- if ( (draw_x7 >= 0) && (draw_y7 <= height()) ) {
- pixel(draw_x7, draw_y7, color);
- }
- }
- return;
-}
-
-void SPI_TFT::fillcircle(int x, int y, int r, int color)
-{
- int i;
- for (i = 0; i <= r; i++)
- circle(x,y,i,color);
-}
-
-
-
-void SPI_TFT::hline(int x0, int x1, int y, int color)
-{
- int w;
- w = x1 - x0 + 1;
- window(x0,y,w,1);
- wr_cmd(0x22);
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
- LPC_GPDMACH0->DMACCControl = w | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1; // start DMA
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs = 1;
- WindowMax();
- return;
-}
-
-void SPI_TFT::vline(int x, int y0, int y1, int color)
-{
- int h;
- h = y1 - y0 + 1;
- window(x,y0,1,h);
- wr_cmd(0x22);
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
- LPC_GPDMACH0->DMACCControl = h | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs = 1;
- WindowMax();
- return;
-}
-
-
-
-void SPI_TFT::line(int x0, int y0, int x1, int y1, int color)
-{
- //WindowMax();
- int dx = 0, dy = 0;
- int dx_sym = 0, dy_sym = 0;
- int dx_x2 = 0, dy_x2 = 0;
- int di = 0;
-
- dx = x1-x0;
- dy = y1-y0;
-
- if (dx == 0) { /* vertical line */
- if (y1 > y0) vline(x0,y0,y1,color);
- else vline(x0,y1,y0,color);
- return;
- }
-
- if (dx > 0) {
- dx_sym = 1;
- } else {
- dx_sym = -1;
- }
- if (dy == 0) { /* horizontal line */
- if (x1 > x0) hline(x0,x1,y0,color);
- else hline(x1,x0,y0,color);
- return;
- }
-
- if (dy > 0) {
- dy_sym = 1;
- } else {
- dy_sym = -1;
- }
-
- dx = dx_sym*dx;
- dy = dy_sym*dy;
-
- dx_x2 = dx*2;
- dy_x2 = dy*2;
-
- if (dx >= dy) {
- di = dy_x2 - dx;
- while (x0 != x1) {
-
- pixel(x0, y0, color);
- x0 += dx_sym;
- if (di<0) {
- di += dy_x2;
- } else {
- di += dy_x2 - dx_x2;
- y0 += dy_sym;
- }
- }
- pixel(x0, y0, color);
- } else {
- di = dx_x2 - dy;
- while (y0 != y1) {
- pixel(x0, y0, color);
- y0 += dy_sym;
- if (di < 0) {
- di += dx_x2;
- } else {
- di += dx_x2 - dy_x2;
- x0 += dx_sym;
- }
- }
- pixel(x0, y0, color);
- }
- return;
-}
-
-
-void SPI_TFT::rect(int x0, int y0, int x1, int y1, int color)
-{
-
- if (x1 > x0) hline(x0,x1,y0,color);
- else hline(x1,x0,y0,color);
-
- if (y1 > y0) vline(x0,y0,y1,color);
- else vline(x0,y1,y0,color);
-
- if (x1 > x0) hline(x0,x1,y1,color);
- else hline(x1,x0,y1,color);
-
- if (y1 > y0) vline(x1,y0,y1,color);
- else vline(x1,y1,y0,color);
-
- return;
-}
-
-
-
-void SPI_TFT::fillrect(int x0, int y0, int x1, int y1, int color)
-{
-
- int h = y1 - y0 + 1;
- int w = x1 - x0 + 1;
- int pixel = h * w;
- int dma_count;
- window(x0,y0,w,h);
- wr_cmd(0x22);
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- do {
- if (pixel > 4095) {
- dma_count = 4095;
- pixel = pixel - 4095;
- } else {
- dma_count = pixel;
- pixel = 0;
- }
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
- LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- } while (pixel > 0);
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs = 1;
- WindowMax();
- return;
-}
-
-
-void SPI_TFT::locate(int x, int y)
-{
- char_x = x;
- char_y = y;
-}
-
-
-
-int SPI_TFT::columns()
-{
- return width() / font[1];
-}
-
-
-
-int SPI_TFT::rows()
-{
- return height() / font[2];
-}
-
-
-
-int SPI_TFT::_putc(int value)
-{
- if (value == '\n') { // new line
- char_x = 0;
- char_y = char_y + font[2];
- if (char_y >= height() - font[2]) {
- char_y = 0;
- }
- } else {
- character(char_x, char_y, value);
- }
- return value;
-}
-
-
-
-
-void SPI_TFT::character(int x, int y, int c)
-{
- unsigned int hor,vert,offset,bpl,j,i,b,p;
- unsigned char* zeichen;
- unsigned char z,w;
- unsigned int pixel;
- unsigned int dma_count,dma_off;
- uint16_t *buffer;
-
- if ((c < 31) || (c > 127)) return; // test char range
-
- // read font parameter from start of array
- offset = font[0]; // bytes / char
- hor = font[1]; // get hor size of font
- vert = font[2]; // get vert size of font
- bpl = font[3]; // bytes per line
-
- if (char_x + hor > width()) {
- char_x = 0;
- char_y = char_y + vert;
- if (char_y >= height() - font[2]) {
- char_y = 0;
- }
- }
- window(char_x, char_y,hor,vert); // char box
- wr_cmd(0x22);
-
- pixel = hor * vert; // calculate buffer size
-
- buffer = (uint16_t *) malloc (2*pixel); // we need a buffer for the 16 bit
- if (buffer == NULL) {
- //led = 1;
- //pc.printf("Malloc error !\n\r");
- return; // error no memory
- }
-
- zeichen = &font[((c -32) * offset) + 4]; // start of char bitmap
- w = zeichen[0]; // width of actual char
- p = 0;
- // construct the char into the buffer
- for (j=0; j<vert; j++) { // vert line
- for (i=0; i<hor; i++) { // horz line
- z = zeichen[bpl * i + ((j & 0xF8) >> 3)+1];
- b = 1 << (j & 0x07);
- if (( z & b ) == 0x00) {
- buffer[p] = _background;
- } else {
- buffer[p] = _foreground;
- }
- p++;
- }
- }
-
-
- // copy the buffer with DMA SPI to display
- dma_off = 0; // offset for DMA transfer
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- }
-
- // start DMA
- do {
- if (pixel > 4095) { // this is a giant font !
- dma_count = 4095;
- pixel = pixel - 4095;
- } else {
- dma_count = pixel;
- pixel = 0;
- }
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t) (buffer + dma_off);
- LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
- dma_off = dma_off + dma_count;
- } while (pixel > 0);
-
- free ((uint16_t *) buffer);
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
- /* disable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x0;
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
- /* disable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x0;
- }
- _cs = 1;
- WindowMax();
- if ((w + 2) < hor) { // x offset to next char
- char_x += w + 2;
- } else char_x += hor;
-
-}
-
-
-void SPI_TFT::set_font(unsigned char* f)
-{
- font = f;
-}
-
-
-
-void SPI_TFT::Bitmap(unsigned int x, unsigned int y, unsigned int w, unsigned int h,unsigned char *bitmap)
-{
- unsigned int j;
- int padd;
- unsigned short *bitmap_ptr = (unsigned short *)bitmap;
- // the lines are padded to multiple of 4 bytes in a bitmap
- padd = -1;
- do {
- padd ++;
- } while (2*(w + padd)%4 != 0);
- window(x, y, w, h);
- wr_cmd(0x22);
- _cs = 0;
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data command
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
-
- }
-
- bitmap_ptr += ((h - 1)* (w + padd));
- for (j = 0; j < h; j++) { //Lines
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)bitmap_ptr;
- LPC_GPDMACH0->DMACCControl = w | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- bitmap_ptr -= w;
- bitmap_ptr -= padd;
- }
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs = 1;
- WindowMax();
-}
-
-
-int SPI_TFT::BMP_16(unsigned int x, unsigned int y, const char *Name_BMP)
-{
-
-#define OffsetPixelWidth 18
-#define OffsetPixelHeigh 22
-#define OffsetFileSize 34
-#define OffsetPixData 10
-#define OffsetBPP 28
-
- char filename[50];
- unsigned char BMP_Header[54];
- unsigned short BPP_t;
- unsigned int PixelWidth,PixelHeigh,start_data;
- unsigned int i,off;
- int padd,j;
- unsigned short *line;
-
- // get the filename
- LocalFileSystem local("local");
- sprintf(&filename[0],"/local/");
- i=7;
- while (*Name_BMP!='\0') {
- filename[i++]=*Name_BMP++;
- }
-
- fprintf(stderr, "filename : %s \n\r",filename);
-
- FILE *Image = fopen((const char *)&filename[0], "rb"); // open the bmp file
- if (!Image) {
- return(0); // error file not found !
- }
-
- fread(&BMP_Header[0],1,54,Image); // get the BMP Header
-
- if (BMP_Header[0] != 0x42 || BMP_Header[1] != 0x4D) { // check magic byte
- fclose(Image);
- return(-1); // error no BMP file
- }
-
- BPP_t = BMP_Header[OffsetBPP] + (BMP_Header[OffsetBPP + 1] << 8);
- if (BPP_t != 0x0010) {
- fclose(Image);
- return(-2); // error no 16 bit BMP
- }
-
- PixelHeigh = BMP_Header[OffsetPixelHeigh] + (BMP_Header[OffsetPixelHeigh + 1] << 8) + (BMP_Header[OffsetPixelHeigh + 2] << 16) + (BMP_Header[OffsetPixelHeigh + 3] << 24);
- PixelWidth = BMP_Header[OffsetPixelWidth] + (BMP_Header[OffsetPixelWidth + 1] << 8) + (BMP_Header[OffsetPixelWidth + 2] << 16) + (BMP_Header[OffsetPixelWidth + 3] << 24);
- if (PixelHeigh > height() + y || PixelWidth > width() + x) {
- fclose(Image);
- return(-3); // to big
- }
-
- start_data = BMP_Header[OffsetPixData] + (BMP_Header[OffsetPixData + 1] << 8) + (BMP_Header[OffsetPixData + 2] << 16) + (BMP_Header[OffsetPixData + 3] << 24);
-
- line = (unsigned short *) malloc (2 * PixelWidth); // we need a buffer for a line
- if (line == NULL) {
- return(-4); // error no memory
- }
-
- // the bmp lines are padded to multiple of 4 bytes
- padd = -1;
- do {
- padd ++;
- } while ((PixelWidth * 2 + padd)%4 != 0);
-
-
-//fseek(Image, 70 ,SEEK_SET);
- window(x, y,PixelWidth ,PixelHeigh);
- wr_cmd(0x22);
- _cs = 0;
-
- if (spi_port == 0) { // TFT on SSP0
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
- LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP0->DR = 0x72; // start Data
- LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
- /* Enable SSP0 for DMA. */
- LPC_SSP0->DMACR = 0x2;
-
- } else {
- LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
- LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
- LPC_SSP1->DR = 0x72; // start Data
- LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
- /* Enable SSP1 for DMA. */
- LPC_SSP1->DMACR = 0x2;
- }
- for (j = PixelHeigh - 1; j >= 0; j--) { //Lines bottom up
- off = j * (PixelWidth * 2 + padd) + start_data; // start of line
- fseek(Image, off ,SEEK_SET);
- fread(line,1,PixelWidth * 2,Image); // read a line - slow !
-
- LPC_GPDMA->DMACIntTCClear = 0x1;
- LPC_GPDMA->DMACIntErrClr = 0x1;
- LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)line;
- LPC_GPDMACH0->DMACCControl = PixelWidth | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
- LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
- LPC_GPDMA->DMACSoftSReq = 0x1;
- do {
- } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
-
- }
-
- if (spi_port == 0) { // TFT on SSP0
- do {
- } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
- } else {
- do {
- } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
- }
- _cs = 1;
- free (line);
- fclose(Image);
- WindowMax();
- return(1);
+/* mbed library for 240*320 pixel display TFT based on HX8347D LCD Controller
+ * Copyright (c) 2011 Peter Drescher - DC2PD
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+// fix bmp padding for Bitmap function
+// speed up pixel
+// 30.12.11 fix cls
+// 11.03.12 use DMA to speed up
+// 15.03.12 use SSEL for TFT CS to enable DMA Register writes
+// 06.04.12 fix SSEL CS problem
+// 06.04.12 use direct access to the spi register to speed up the library.
+// 11.09.12 switch back to using io pin as cs to avoid problems with SSEL CS.
+// 21.09.12 fix Bug in BMP_16
+// 11.10.12 patch from Hans Bergles to get SPI1 working again
+// 03.02.13 add a switch to switch off DMA use for LPC11U24
+
+#include "SPI_TFT.h"
+#include "mbed.h"
+
+#define BPP 16 // Bits per pixel
+
+#if defined TARGET_LPC1768
+#define USE_DMA
+#endif
+
+#if defined NO_DMA
+#undef USE_DMA
+#endif
+
+
+//extern Serial pc;
+//extern DigitalOut xx; // debug !!
+
+SPI_TFT::SPI_TFT(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName reset, const char *name)
+ : _spi(mosi, miso, sclk), _cs(cs), _reset(reset),GraphicsDisplay(name)
+{
+ orientation = 0;
+ char_x = 0;
+ if (mosi == p11 || mosi == P0_18) spi_port = 0; // we must know the used SPI port to setup the DMA
+ else spi_port = 1;
+ tft_reset();
+}
+
+int SPI_TFT::width()
+{
+ if (orientation == 0 || orientation == 2) return 240;
+ else return 320;
+}
+
+
+int SPI_TFT::height()
+{
+ if (orientation == 0 || orientation == 2) return 320;
+ else return 240;
+}
+
+
+void SPI_TFT::set_orientation(unsigned int o)
+{
+ orientation = o;
+ switch (orientation) {
+ case 0:
+ wr_reg(0x16, 0x08);
+ break;
+ case 1:
+ wr_reg(0x16, 0x68);
+ break;
+ case 2:
+ wr_reg(0x16, 0xC8);
+ break;
+ case 3:
+ wr_reg(0x16, 0xA8);
+ break;
+ }
+ WindowMax();
+}
+
+
+// write command to tft register
+
+void SPI_TFT::wr_cmd(unsigned char cmd)
+{
+ unsigned short spi_d;
+ spi_d = 0x7000 | cmd ;
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ LPC_SSP0->DR = spi_d;
+ // we have to wait for SPI IDLE to set CS back to high
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
+ } else {
+ LPC_SSP1->DR = spi_d;
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
+ }
+ _cs = 1;
+}
+
+
+
+void SPI_TFT::wr_dat(unsigned char dat)
+{
+ unsigned short spi_d;
+ spi_d = 0x7200 | dat;
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ LPC_SSP0->DR = spi_d;
+ // we have to wait for SPI IDLE to set CS back to high
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
+ } else {
+ LPC_SSP1->DR = spi_d;
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
+ }
+ _cs = 1;
+}
+
+
+
+// the HX8347-D controller do not use the MISO (SDO) Signal.
+// This is a bug - ?
+// A read will return 0 at the moment
+
+unsigned short SPI_TFT::rd_dat (void)
+{
+ unsigned short val = 0;
+
+ //val = _spi.write(0x73ff); /* Dummy read 1 */
+ //val = _spi.write(0x0000); /* Read D8..D15 */
+ return (val);
+}
+
+void SPI_TFT::wr_reg (unsigned char reg, unsigned char val)
+{
+ wr_cmd(reg);
+ wr_dat(val);
+}
+
+unsigned short SPI_TFT::rd_reg (unsigned char reg)
+{
+ wr_cmd(reg);
+ return(rd_dat());
+}
+
+void SPI_TFT::tft_reset()
+{
+ //static unsigned short driverCode;
+ _spi.format(16,3); // 16 bit spi mode 3
+ _spi.frequency(48000000); // 48 Mhz SPI clock
+ _cs = 1; // cs high
+ _reset = 0; // display reset
+
+ wait_us(50);
+ _reset = 1; // end reset
+ wait_ms(5);
+
+ /* Start Initial Sequence ----------------------------------------------------*/
+ wr_reg(0xEA, 0x00); /* Reset Power Control 1 */
+ wr_reg(0xEB, 0x20); /* Power Control 2 */
+ wr_reg(0xEC, 0x0C); /* Power Control 3 */
+ wr_reg(0xED, 0xC4); /* Power Control 4 */
+ wr_reg(0xE8, 0x40); /* Source OPON_N */
+ wr_reg(0xE9, 0x38); /* Source OPON_I */
+ wr_reg(0xF1, 0x01); /* */
+ wr_reg(0xF2, 0x10); /* */
+ wr_reg(0x27, 0xA3); /* Display Control 2 */
+
+ /* Power On sequence ---------------------------------------------------------*/
+ wr_reg(0x1B, 0x1B); /* Power Control 2 */
+ wr_reg(0x1A, 0x01); /* Power Control 1 */
+ wr_reg(0x24, 0x2F); /* Vcom Control 2 */
+ wr_reg(0x25, 0x57); /* Vcom Control 3 */
+ wr_reg(0x23, 0x8D); /* Vcom Control 1 */
+
+ /* Gamma settings -----------------------------------------------------------*/
+ wr_reg(0x40,0x00); //
+ wr_reg(0x41,0x00); //
+ wr_reg(0x42,0x01); //
+ wr_reg(0x43,0x13); //
+ wr_reg(0x44,0x10); //
+ wr_reg(0x45,0x26); //
+ wr_reg(0x46,0x08); //
+ wr_reg(0x47,0x51); //
+ wr_reg(0x48,0x02); //
+ wr_reg(0x49,0x12); //
+ wr_reg(0x4A,0x18); //
+ wr_reg(0x4B,0x19); //
+ wr_reg(0x4C,0x14); //
+ wr_reg(0x50,0x19); //
+ wr_reg(0x51,0x2F); //
+ wr_reg(0x52,0x2C); //
+ wr_reg(0x53,0x3E); //
+ wr_reg(0x54,0x3F); //
+ wr_reg(0x55,0x3F); //
+ wr_reg(0x56,0x2E); //
+ wr_reg(0x57,0x77); //
+ wr_reg(0x58,0x0B); //
+ wr_reg(0x59,0x06); //
+ wr_reg(0x5A,0x07); //
+ wr_reg(0x5B,0x0D); //
+ wr_reg(0x5C,0x1D); //
+ wr_reg(0x5D,0xCC); //
+
+ /* Power + Osc ---------------------------------------------------------------*/
+ wr_reg(0x18, 0x0036); /* OSC Control 1 */
+ wr_reg(0x19, 0x0001); /* OSC Control 2 */
+ wr_reg(0x01, 0x0000); /* Display Mode Control */
+ wr_reg(0x1F, 0x0088); /* Power Control 6 */
+ wait_ms(5); /* Delay 5 ms */
+ wr_reg(0x1F, 0x0080); /* Power Control 6 */
+ wait_ms(5); /* Delay 5 ms */
+ wr_reg(0x1F, 0x0090); /* Power Control 6 */
+ wait_ms(5); /* Delay 5 ms */
+ wr_reg(0x1F, 0x00D0); /* Power Control 6 */
+ wait_ms(5); /* Delay 5 ms */
+
+ wr_reg(0x17, 0x0005); /* Colmod 16Bit/Pixel */
+
+ wr_reg(0x36, 0x0000); /* Panel Characteristic */
+ wr_reg(0x28, 0x0038); /* Display Control 3 */
+ wait_ms(40);
+ wr_reg(0x28, 0x003C); /* Display Control 3 */
+ switch (orientation) {
+ case 0:
+ wr_reg(0x16, 0x0008);
+ break;
+ case 1:
+ wr_reg(0x16, 0x0068);
+ break;
+ case 2:
+ wr_reg(0x16, 0x00C8);
+ break;
+ case 3:
+ wr_reg(0x16, 0x00A8);
+ break;
+ }
+#if defined USE_DMA
+ // setup DMA channel 0
+ // Power up the GPDMA.
+ LPC_SC->PCONP |= (1UL << 29);
+ LPC_GPDMA->DMACConfig = 1; // enable DMA controller
+ // Reset the Interrupt status
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCLLI = 0;
+#endif
+ WindowMax ();
+}
+
+
+void SPI_TFT::pixel(int x, int y, int color)
+{
+ unsigned char u,l;
+ wr_reg(0x03, (x >> 0));
+ wr_reg(0x02, (x >> 8));
+ wr_reg(0x07, (y >> 0));
+ wr_reg(0x06, (y >> 8));
+ wr_cmd(0x22);
+ u = color >> 8;
+ l = color & 0xff;
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->DR = u; // high byte
+ LPC_SSP0->DR = l; // low byte
+ LPC_SSP0->CR0 |= 0x08UL; // set back to 16 bit
+ // we have to wait for SPI IDLE to set CS back to high
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
+ } else {
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->DR = u;
+ LPC_SSP1->DR = l;
+ LPC_SSP1->CR0 |= 0x08UL; // set back to 16 bit
+ // we have to wait for SPI IDLE to set CS back to high
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
+ }
+ _cs = 1;
+}
+
+
+void SPI_TFT::window (unsigned int x, unsigned int y, unsigned int w, unsigned int h)
+{
+ wr_reg(0x03, x );
+ wr_reg(0x02, (x >> 8));
+ wr_reg(0x05, x+w-1 );
+ wr_reg(0x04, (x+w-1 >> 8));
+ wr_reg(0x07, y );
+ wr_reg(0x06, ( y >> 8));
+ wr_reg(0x09, ( y+h-1 ));
+ wr_reg(0x08, ( y+h-1 >> 8));
+}
+
+
+void SPI_TFT::WindowMax (void)
+{
+ window (0, 0, width(), height());
+}
+
+
+
+void SPI_TFT::cls (void)
+{
+ int pixel = ( width() * height());
+#if defined USE_DMA
+ int dma_count;
+ int color = _background;
+#endif
+ WindowMax();
+ wr_cmd(0x22);
+
+ // The SSEL signal is held low until the spi FIFO is emty.
+ // We have to lower the SPI clock for the 8 bit start to get the spi running
+ // until the next data word
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
+#endif
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+#endif
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start byte
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+ } else {
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+#endif
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+
+#if defined USE_DMA
+ // start DMA
+ do {
+ if (pixel > 4095) {
+ dma_count = 4095;
+ pixel = pixel - 4095;
+ } else {
+ dma_count = pixel;
+ pixel = 0;
+ }
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1; // DMA request
+
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+
+ } while (pixel > 0);
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((0x0010 & LPC_SSP0->SR) == 0x10); // SPI FIFO not empty
+ /* disable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x0;
+ } else {
+ do {
+ } while ((0x0010 & LPC_SSP1->SR) == 0x10); // SPI FIFO not empty
+ /* disable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x0;
+ }
+#else // no DMA
+ unsigned int i;
+ for (i = 0; i < ( width() * height()); i++)
+ _spi.write(_background);
+#endif
+ _cs = 1;
+}
+
+
+void SPI_TFT::circle(int x0, int y0, int r, int color)
+{
+
+ int draw_x0, draw_y0;
+ int draw_x1, draw_y1;
+ int draw_x2, draw_y2;
+ int draw_x3, draw_y3;
+ int draw_x4, draw_y4;
+ int draw_x5, draw_y5;
+ int draw_x6, draw_y6;
+ int draw_x7, draw_y7;
+ int xx, yy;
+ int di;
+ //WindowMax();
+ if (r == 0) { /* no radius */
+ return;
+ }
+
+ draw_x0 = draw_x1 = x0;
+ draw_y0 = draw_y1 = y0 + r;
+ if (draw_y0 < height()) {
+ pixel(draw_x0, draw_y0, color); /* 90 degree */
+ }
+
+ draw_x2 = draw_x3 = x0;
+ draw_y2 = draw_y3 = y0 - r;
+ if (draw_y2 >= 0) {
+ pixel(draw_x2, draw_y2, color); /* 270 degree */
+ }
+
+ draw_x4 = draw_x6 = x0 + r;
+ draw_y4 = draw_y6 = y0;
+ if (draw_x4 < width()) {
+ pixel(draw_x4, draw_y4, color); /* 0 degree */
+ }
+
+ draw_x5 = draw_x7 = x0 - r;
+ draw_y5 = draw_y7 = y0;
+ if (draw_x5>=0) {
+ pixel(draw_x5, draw_y5, color); /* 180 degree */
+ }
+
+ if (r == 1) {
+ return;
+ }
+
+ di = 3 - 2*r;
+ xx = 0;
+ yy = r;
+ while (xx < yy) {
+
+ if (di < 0) {
+ di += 4*xx + 6;
+ } else {
+ di += 4*(xx - yy) + 10;
+ yy--;
+ draw_y0--;
+ draw_y1--;
+ draw_y2++;
+ draw_y3++;
+ draw_x4--;
+ draw_x5++;
+ draw_x6--;
+ draw_x7++;
+ }
+ xx++;
+ draw_x0++;
+ draw_x1--;
+ draw_x2++;
+ draw_x3--;
+ draw_y4++;
+ draw_y5++;
+ draw_y6--;
+ draw_y7--;
+
+ if ( (draw_x0 <= width()) && (draw_y0>=0) ) {
+ pixel(draw_x0, draw_y0, color);
+ }
+
+ if ( (draw_x1 >= 0) && (draw_y1 >= 0) ) {
+ pixel(draw_x1, draw_y1, color);
+ }
+
+ if ( (draw_x2 <= width()) && (draw_y2 <= height()) ) {
+ pixel(draw_x2, draw_y2, color);
+ }
+
+ if ( (draw_x3 >=0 ) && (draw_y3 <= height()) ) {
+ pixel(draw_x3, draw_y3, color);
+ }
+
+ if ( (draw_x4 <= width()) && (draw_y4 >= 0) ) {
+ pixel(draw_x4, draw_y4, color);
+ }
+
+ if ( (draw_x5 >= 0) && (draw_y5 >= 0) ) {
+ pixel(draw_x5, draw_y5, color);
+ }
+ if ( (draw_x6 <=width()) && (draw_y6 <= height()) ) {
+ pixel(draw_x6, draw_y6, color);
+ }
+ if ( (draw_x7 >= 0) && (draw_y7 <= height()) ) {
+ pixel(draw_x7, draw_y7, color);
+ }
+ }
+ return;
+}
+
+void SPI_TFT::fillcircle(int x, int y, int r, int color)
+{
+ int i;
+ for (i = 0; i <= r; i++)
+ circle(x,y,i,color);
+}
+
+
+
+void SPI_TFT::hline(int x0, int x1, int y, int color)
+{
+ int w,i;
+ w = x1 - x0 + 1;
+ window(x0,y,w,1);
+ wr_cmd(0x22);
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ for (i = 0; i < ( width() * height()); i++)
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+#endif
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+ } else {
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+#endif
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+#if defined USE_DMA
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
+ LPC_GPDMACH0->DMACCControl = w | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1; // start DMA
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
+ } else {
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
+ }
+#else
+ for (i=0; i<w; i++) {
+ _spi.write(color);
+ }
+
+#endif
+ _cs = 1;
+ WindowMax();
+ return;
+}
+
+void SPI_TFT::vline(int x, int y0, int y1, int color)
+{
+ int h;
+ h = y1 - y0 + 1;
+ window(x,y0,1,h);
+ wr_cmd(0x22);
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+#endif
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+ } else {
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+#endif
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+#if defined USE_DMA
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
+ LPC_GPDMACH0->DMACCControl = h | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1;
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
+ } else {
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
+ }
+#else
+ for (int y=0; y<h; y++) {
+ _spi.write(color);
+ }
+#endif
+
+ _cs = 1;
+ WindowMax();
+ return;
+}
+
+
+
+void SPI_TFT::line(int x0, int y0, int x1, int y1, int color)
+{
+ //WindowMax();
+ int dx = 0, dy = 0;
+ int dx_sym = 0, dy_sym = 0;
+ int dx_x2 = 0, dy_x2 = 0;
+ int di = 0;
+
+ dx = x1-x0;
+ dy = y1-y0;
+
+ if (dx == 0) { /* vertical line */
+ if (y1 > y0) vline(x0,y0,y1,color);
+ else vline(x0,y1,y0,color);
+ return;
+ }
+
+ if (dx > 0) {
+ dx_sym = 1;
+ } else {
+ dx_sym = -1;
+ }
+ if (dy == 0) { /* horizontal line */
+ if (x1 > x0) hline(x0,x1,y0,color);
+ else hline(x1,x0,y0,color);
+ return;
+ }
+
+ if (dy > 0) {
+ dy_sym = 1;
+ } else {
+ dy_sym = -1;
+ }
+
+ dx = dx_sym*dx;
+ dy = dy_sym*dy;
+
+ dx_x2 = dx*2;
+ dy_x2 = dy*2;
+
+ if (dx >= dy) {
+ di = dy_x2 - dx;
+ while (x0 != x1) {
+
+ pixel(x0, y0, color);
+ x0 += dx_sym;
+ if (di<0) {
+ di += dy_x2;
+ } else {
+ di += dy_x2 - dx_x2;
+ y0 += dy_sym;
+ }
+ }
+ pixel(x0, y0, color);
+ } else {
+ di = dx_x2 - dy;
+ while (y0 != y1) {
+ pixel(x0, y0, color);
+ y0 += dy_sym;
+ if (di < 0) {
+ di += dx_x2;
+ } else {
+ di += dx_x2 - dy_x2;
+ x0 += dx_sym;
+ }
+ }
+ pixel(x0, y0, color);
+ }
+ return;
+}
+
+
+void SPI_TFT::rect(int x0, int y0, int x1, int y1, int color)
+{
+
+ if (x1 > x0) hline(x0,x1,y0,color);
+ else hline(x1,x0,y0,color);
+
+ if (y1 > y0) vline(x0,y0,y1,color);
+ else vline(x0,y1,y0,color);
+
+ if (x1 > x0) hline(x0,x1,y1,color);
+ else hline(x1,x0,y1,color);
+
+ if (y1 > y0) vline(x1,y0,y1,color);
+ else vline(x1,y1,y0,color);
+
+ return;
+}
+
+
+
+void SPI_TFT::fillrect(int x0, int y0, int x1, int y1, int color)
+{
+
+ int h = y1 - y0 + 1;
+ int w = x1 - x0 + 1;
+ int pixel = h * w;
+ #if defined USE_DMA
+ int dma_count;
+ #endif
+ window(x0,y0,w,h);
+ wr_cmd(0x22);
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ #if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+ #endif
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+ } else {
+ #if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+ #endif
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+ #if defined USE_DMA
+ do {
+ if (pixel > 4095) {
+ dma_count = 4095;
+ pixel = pixel - 4095;
+ } else {
+ dma_count = pixel;
+ pixel = 0;
+ }
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)&color;
+ LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) ; // 16 bit transfer , no address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1;
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+
+ } while (pixel > 0);
+
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
+ } else {
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
+ }
+
+ #else // no DMA
+ for (int p=0; p<pixel; p++) {
+ _spi.write(color);
+ }
+ #endif
+
+ _cs = 1;
+ WindowMax();
+ return;
+}
+
+
+void SPI_TFT::locate(int x, int y)
+{
+ char_x = x;
+ char_y = y;
+}
+
+
+
+int SPI_TFT::columns()
+{
+ return width() / font[1];
+}
+
+
+
+int SPI_TFT::rows()
+{
+ return height() / font[2];
+}
+
+
+
+int SPI_TFT::_putc(int value)
+{
+ if (value == '\n') { // new line
+ char_x = 0;
+ char_y = char_y + font[2];
+ if (char_y >= height() - font[2]) {
+ char_y = 0;
+ }
+ } else {
+ character(char_x, char_y, value);
+ }
+ return value;
+}
+
+
+
+
+void SPI_TFT::character(int x, int y, int c)
+{
+ unsigned int hor,vert,offset,bpl,j,i,b,p;
+ unsigned char* zeichen;
+ unsigned char z,w;
+ #if defined USE_DMA
+ unsigned int pixel;
+ unsigned int dma_count,dma_off;
+ uint16_t *buffer;
+ #endif
+
+ if ((c < 31) || (c > 127)) return; // test char range
+
+ // read font parameter from start of array
+ offset = font[0]; // bytes / char
+ hor = font[1]; // get hor size of font
+ vert = font[2]; // get vert size of font
+ bpl = font[3]; // bytes per line
+
+ if (char_x + hor > width()) {
+ char_x = 0;
+ char_y = char_y + vert;
+ if (char_y >= height() - font[2]) {
+ char_y = 0;
+ }
+ }
+ window(char_x, char_y,hor,vert); // char box
+ wr_cmd(0x22);
+
+#if defined USE_DMA
+ pixel = hor * vert; // calculate buffer size
+
+ buffer = (uint16_t *) malloc (2*pixel); // we need a buffer for the 16 bit
+ if (buffer == NULL) {
+ //led = 1;
+ //pc.printf("Malloc error !\n\r");
+ return; // error no memory
+ }
+
+ zeichen = &font[((c -32) * offset) + 4]; // start of char bitmap
+ w = zeichen[0]; // width of actual char
+ p = 0;
+ // construct the char into the buffer
+ for (j=0; j<vert; j++) { // vert line
+ for (i=0; i<hor; i++) { // horz line
+ z = zeichen[bpl * i + ((j & 0xF8) >> 3)+1];
+ b = 1 << (j & 0x07);
+ if (( z & b ) == 0x00) {
+ buffer[p] = _background;
+ } else {
+ buffer[p] = _foreground;
+ }
+ p++;
+ }
+ }
+
+ // copy the buffer with DMA SPI to display
+ dma_off = 0; // offset for DMA transfer
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+ } else {
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+
+ // start DMA
+ do {
+ if (pixel > 4095) { // this is a giant font !
+ dma_count = 4095;
+ pixel = pixel - 4095;
+ } else {
+ dma_count = pixel;
+ pixel = 0;
+ }
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t) (buffer + dma_off);
+ LPC_GPDMACH0->DMACCControl = dma_count | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1;
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+ dma_off = dma_off + dma_count;
+ } while (pixel > 0);
+
+ free ((uint16_t *) buffer);
+
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI0 not idle
+ /* disable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x0;
+ } else {
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
+ /* disable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x0;
+ }
+
+#else
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+ } else {
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+ zeichen = &font[((c -32) * offset) + 4]; // start of char bitmap
+ w = zeichen[0]; // width of actual char
+ for (j=0; j<vert; j++) { // vert line
+ for (i=0; i<hor; i++) { // horz line
+ z = zeichen[bpl * i + ((j & 0xF8) >> 3)+1];
+ b = 1 << (j & 0x07);
+ if (( z & b ) == 0x00) {
+ _spi.write(_background);
+ } else {
+ _spi.write(_foreground);
+ }
+ }
+ }
+#endif
+
+ _cs = 1;
+ WindowMax();
+ if ((w + 2) < hor) { // x offset to next char
+ char_x += w + 2;
+ } else char_x += hor;
+
+}
+
+
+void SPI_TFT::set_font(unsigned char* f)
+{
+ font = f;
+}
+
+
+
+void SPI_TFT::Bitmap(unsigned int x, unsigned int y, unsigned int w, unsigned int h,unsigned char *bitmap)
+{
+ unsigned int j;
+ int padd;
+ unsigned short *bitmap_ptr = (unsigned short *)bitmap;
+ // the lines are padded to multiple of 4 bytes in a bitmap
+ padd = -1;
+ do {
+ padd ++;
+ } while (2*(w + padd)%4 != 0);
+ window(x, y, w, h);
+ wr_cmd(0x22);
+ _cs = 0;
+ if (spi_port == 0) { // TFT on SSP0
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+#endif
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+
+ } else {
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+#endif
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data command
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+
+ bitmap_ptr += ((h - 1)* (w + padd));
+#if defined USE_DMA
+ for (j = 0; j < h; j++) { //Lines
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)bitmap_ptr;
+ LPC_GPDMACH0->DMACCControl = w | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1;
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+
+ bitmap_ptr -= w;
+ bitmap_ptr -= padd;
+ }
+#else
+ unsigned int i;
+ for (j = 0; j < h; j++) { //Lines
+ for (i = 0; i < w; i++) { // copy pixel data to TFT
+ _spi.write(*bitmap_ptr); // one line
+ bitmap_ptr++;
+ }
+ bitmap_ptr -= 2*w;
+ bitmap_ptr -= padd;
+ }
+#endif
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
+ } else {
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
+ }
+ _cs = 1;
+ WindowMax();
+}
+
+
+int SPI_TFT::BMP_16(unsigned int x, unsigned int y, const char *Name_BMP)
+{
+
+#define OffsetPixelWidth 18
+#define OffsetPixelHeigh 22
+#define OffsetFileSize 34
+#define OffsetPixData 10
+#define OffsetBPP 28
+
+ char filename[50];
+ unsigned char BMP_Header[54];
+ unsigned short BPP_t;
+ unsigned int PixelWidth,PixelHeigh,start_data;
+ unsigned int i,off;
+ int padd,j;
+ unsigned short *line;
+
+ // get the filename
+ LocalFileSystem local("local");
+ sprintf(&filename[0],"/local/");
+ i=7;
+ while (*Name_BMP!='\0') {
+ filename[i++]=*Name_BMP++;
+ }
+
+ fprintf(stderr, "filename : %s \n\r",filename);
+
+ FILE *Image = fopen((const char *)&filename[0], "rb"); // open the bmp file
+ if (!Image) {
+ return(0); // error file not found !
+ }
+
+ fread(&BMP_Header[0],1,54,Image); // get the BMP Header
+
+ if (BMP_Header[0] != 0x42 || BMP_Header[1] != 0x4D) { // check magic byte
+ fclose(Image);
+ return(-1); // error no BMP file
+ }
+
+ BPP_t = BMP_Header[OffsetBPP] + (BMP_Header[OffsetBPP + 1] << 8);
+ if (BPP_t != 0x0010) {
+ fclose(Image);
+ return(-2); // error no 16 bit BMP
+ }
+
+ PixelHeigh = BMP_Header[OffsetPixelHeigh] + (BMP_Header[OffsetPixelHeigh + 1] << 8) + (BMP_Header[OffsetPixelHeigh + 2] << 16) + (BMP_Header[OffsetPixelHeigh + 3] << 24);
+ PixelWidth = BMP_Header[OffsetPixelWidth] + (BMP_Header[OffsetPixelWidth + 1] << 8) + (BMP_Header[OffsetPixelWidth + 2] << 16) + (BMP_Header[OffsetPixelWidth + 3] << 24);
+ if (PixelHeigh > height() + y || PixelWidth > width() + x) {
+ fclose(Image);
+ return(-3); // to big
+ }
+
+ start_data = BMP_Header[OffsetPixData] + (BMP_Header[OffsetPixData + 1] << 8) + (BMP_Header[OffsetPixData + 2] << 16) + (BMP_Header[OffsetPixData + 3] << 24);
+
+ line = (unsigned short *) malloc (2 * PixelWidth); // we need a buffer for a line
+ if (line == NULL) {
+ return(-4); // error no memory
+ }
+
+ // the bmp lines are padded to multiple of 4 bytes
+ padd = -1;
+ do {
+ padd ++;
+ } while ((PixelWidth * 2 + padd)%4 != 0);
+
+
+//fseek(Image, 70 ,SEEK_SET);
+ window(x, y,PixelWidth ,PixelHeigh);
+ wr_cmd(0x22);
+ _cs = 0;
+
+ if (spi_port == 0) { // TFT on SSP0
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP0->DR; // we send to SSP0
+ /* Enable SSP0 for DMA. */
+ LPC_SSP0->DMACR = 0x2;
+#endif
+ LPC_SSP0->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP0->DR = 0x72; // start Data
+ LPC_SSP0->CR0 |= 0x08UL; // set to 16 bit
+
+ } else {
+#if defined USE_DMA
+ LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
+ /* Enable SSP1 for DMA. */
+ LPC_SSP1->DMACR = 0x2;
+#endif
+ LPC_SSP1->CR0 &= ~(0x08UL); // set to 8 bit
+ LPC_SSP1->DR = 0x72; // start Data
+ LPC_SSP1->CR0 |= 0x08UL; // set to 16 bit
+ }
+ for (j = PixelHeigh - 1; j >= 0; j--) { //Lines bottom up
+ off = j * (PixelWidth * 2 + padd) + start_data; // start of line
+ fseek(Image, off ,SEEK_SET);
+ fread(line,1,PixelWidth * 2,Image); // read a line - slow !
+#if defined USE_DMA
+ LPC_GPDMA->DMACIntTCClear = 0x1;
+ LPC_GPDMA->DMACIntErrClr = 0x1;
+ LPC_GPDMACH0->DMACCSrcAddr = (uint32_t)line;
+ LPC_GPDMACH0->DMACCControl = PixelWidth | (1UL << 18) | (1UL << 21) | (1UL << 31) | DMA_CHANNEL_SRC_INC ; // 16 bit transfer , address increment, interrupt
+ LPC_GPDMACH0->DMACCConfig = DMA_CHANNEL_ENABLE | DMA_TRANSFER_TYPE_M2P | (spi_port ? DMA_DEST_SSP1_TX : DMA_DEST_SSP0_TX);
+ LPC_GPDMA->DMACSoftSReq = 0x1;
+ do {
+ } while ((LPC_GPDMA->DMACRawIntTCStat & 0x01) == 0); // DMA is running
+#else
+ for (i = 0; i < PixelWidth; i++) { // copy pixel data to TFT
+ _spi.write(line[i]); // one 16 bit pixel
+ }
+#endif
+ }
+ if (spi_port == 0) { // TFT on SSP0
+ do {
+ } while ((LPC_SSP0->SR & 0x10) == 0x10); // SPI FIFO not empty
+ } else {
+ do {
+ } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI FIFO not empty
+ }
+ _cs = 1;
+ free (line);
+ fclose(Image);
+ WindowMax();
+ return(1);
}
\ No newline at end of file