Revision 0:979d71505352, committed 2011-06-22

Comitter:

jf1vrr

Date:

Wed Jun 22 12:39:03 2011 +0000

Commit message:

Rev 0.01A 2011/06/22 new!

Changed in this revision

diff -r 000000000000 -r 979d71505352 TextLCD.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TextLCD.lib	Wed Jun 22 12:39:03 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/simon/code/TextLCD/#e4cb7ddee0d3

diff -r 000000000000 -r 979d71505352 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Jun 22 12:39:03 2011 +0000
@@ -0,0 +1,471 @@
+/*mbed EPROM 27256 Vpp 12.5V Writter
+Functions
+Blank Check(SW = 0): Check blank(all 1) erased EPROM
+Write(SW = 1): Write Hex file(TEST1.HEX) to EPROM
+Read: Read from EPROM and dump to local file(TEST1.DMP)
+Copy: Read from dump image file(TEST1.DMP) and write to EPROM
+*/
+#include "mbed.h"
+#include "TextLCD.h"
+
+LocalFileSystem local("mbed");
+BusInOut DATA(p5, p6, p7, p8, p9, p10, p11, p12);
+BusOut ADRS(p13, p14);
+DigitalOut RD(p15);
+DigitalOut WR(p16);
+DigitalOut RESET(p17);
+DigitalOut CE(p18);
+DigitalOut OE(p19);
+DigitalOut VCP_0V(p20);
+DigitalOut VCP_5V(p21);
+DigitalIn  BTN(p22);
+BusIn SW(p23, p24);
+TextLCD lcd(p25, p26, p27, p28, p29, p30);
+
+DigitalOut LED_BUSY(LED1);
+DigitalOut LED_5V(LED2);
+DigitalOut LED_12V(LED3);
+DigitalOut LED_RETRY(LED4);
+
+#define _HIGH    1
+#define _LOW     0
+
+#define SET_READ   DATA.input()
+#define SET_WRITE  DATA.output()
+
+#define PORT_A  0
+#define PORT_B  1
+#define PORT_C  2
+#define CONTRL  3
+
+#define MAX_ADDRESS 1024
+
+union UNION1{
+    struct HEX{
+        uint8_t marker;
+        uint8_t length[2];
+        uint8_t offset[4];
+        uint8_t rectype[2];
+        uint8_t data[64]; 
+    } h;
+    char    hex_line[137];
+} u;
+
+union UNION2{
+    uint16_t    address;
+    uint8_t     hl_address[2];
+} a;
+
+FILE *fp;
+char hex_filename[] = "/mbed/test1.hex";
+char out_filename[] = "/mbed/test1.dmp";
+char in_filename[] = "/mbed/test1.dmp";
+
+short ROM_write(uint8_t address_h, uint8_t address_l, short data_byte){
+    short   read_byte;
+
+    LED_BUSY = _HIGH;
+    wait_us(1000);
+    SET_WRITE;
+    ADRS = CONTRL;
+    DATA = 0x80;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+    
+    ADRS = PORT_A;
+    DATA = address_l;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+
+    ADRS = PORT_B;
+    DATA = address_h;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+    
+    ADRS = PORT_C;
+    DATA = data_byte;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+    
+    CE = _LOW;
+    wait_us(100);
+    CE = _HIGH;
+
+    wait_us(10);
+ 
+    ADRS = CONTRL;
+    DATA = 0x89;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+       
+    ADRS = PORT_A;
+    DATA = address_l;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+    
+    ADRS = PORT_B;
+    DATA = address_h;
+    WR = _LOW;
+    wait_us(100);
+    WR = _HIGH;
+
+    SET_READ;
+    ADRS = PORT_C;
+    OE = _LOW;
+    wait_us(100);
+    RD = _LOW;
+    wait_us(100);
+    read_byte = DATA;
+    wait_us(50);
+    RD = _HIGH;
+    OE = _HIGH;
+    SET_WRITE;
+    LED_BUSY = _LOW;
+
+    return read_byte;  
+}
+
+uint8_t ROM_read(uint8_t address_h, uint8_t address_l){
+    uint8_t   read_byte;
+
+    LED_BUSY = _HIGH;
+    SET_WRITE;
+    ADRS = CONTRL;
+    DATA = 0x89;
+    WR = _LOW;
+    wait_us(10);
+    WR = _HIGH;
+       
+    ADRS = PORT_A;
+    DATA = address_l;
+    WR = _LOW;
+    wait_us(10);
+    WR = _HIGH;
+    
+    ADRS = PORT_B;
+    DATA = address_h;
+    WR = _LOW;
+    wait_us(10);
+    WR = _HIGH;
+    
+    SET_READ;
+    ADRS = PORT_C;
+    CE = _LOW;
+    wait_us(10);    
+    OE = _LOW;
+    wait_us(10);
+    RD = _LOW;
+    wait_us(100);
+    read_byte = DATA;
+    wait_us(10);
+    RD = _HIGH;
+    OE = _HIGH;
+    CE = _HIGH;
+    
+    SET_WRITE;
+    LED_BUSY = _LOW;
+    return read_byte;  
+}
+
+char h2d(char h_data){
+    char d_data;
+
+    d_data = 0;
+    if(h_data <= '9') d_data = h_data - '0';
+    else if(h_data >= 'A') d_data = h_data - 'A' + 10;
+    return d_data;
+}
+
+void Vcc_5V_Vpp_5V(){
+    LED_12V = _LOW;
+    LED_5V = _HIGH;
+    VCP_0V = _LOW;
+    VCP_5V = _HIGH;
+}
+
+void Vcc_6V_Vpp_12V(){
+    LED_5V = _LOW;
+    LED_12V = _HIGH;
+    VCP_0V = _LOW;
+    VCP_5V = _LOW;
+}
+
+void Vcc_0V_Vpp_0V(){
+    LED_5V = _LOW;
+    LED_12V = _LOW;
+    VCP_0V = _HIGH;
+    VCP_5V = _LOW;
+}
+
+void get_btn(){
+    int cnt;
+    
+    cnt = 0;
+    lcd.locate(0, 1);
+    lcd.printf("Push BTN to Cont");
+    while(cnt < 30){
+        if(BTN == _HIGH) cnt++;
+    }
+}
+
+void blank_check(){
+    uint8_t read_data;
+        
+    lcd.locate(0,0);
+    lcd.printf("Blank Chk Mode  ");
+    get_btn();
+    
+    Vcc_5V_Vpp_5V();
+    for(a.address = 0; a.address < MAX_ADDRESS; a.address++){
+        read_data = ROM_read(a.hl_address[1], a.hl_address[0]);
+        lcd.locate(0,1);
+        lcd.printf("%04X %02X         ", a.address, read_data);
+        if( read_data != 0xFF) goto __BLNK_ERROR;
+    }
+    lcd.locate(0,0);
+    lcd.printf("Success!        ");
+    return;
+
+__BLNK_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("Blnk Check Error");
+    return;      
+} //blank_check()
+
+void write_rom(){
+    int i, len, line;
+    int  sum, cs;
+    short length, high_byte, low_byte;
+    uint8_t write_data, read_data, rty_cnt;
+    
+    lcd.locate(0,0);
+    lcd.printf("HEX WRITE to ROM");
+    lcd.locate(0,1);
+    lcd.printf(hex_filename);
+    get_btn();
+             
+    if ( NULL == (fp = fopen( hex_filename, "r" )) )
+        goto __HEX_FILE_OPEN_ERROR;
+
+    line = 0;
+    while(1){
+        for(len = 0; len < 137; len++){
+            u.hex_line[len] = fgetc(fp);
+            if(feof(fp) != NULL) goto __EOF;
+            if(u.hex_line[len] == 0x0A) goto __EXIT_FOR;
+        }
+
+__EXIT_FOR:    
+        u.hex_line[len - 1] = NULL; //Remove CRLF and terminate
+        line++;
+        if(u.h.marker != ':') goto __MARKER_ERROR;
+    
+        length = 0;
+        high_byte = h2d(u.h.length[0]) * 16;
+        low_byte = h2d(u.h.length[1]);
+        length = high_byte + low_byte; 
+      
+        a.hl_address[0] = (h2d(u.h.offset[2]) * 16) + h2d(u.h.offset[3]);
+        a.hl_address[1] = (h2d(u.h.offset[0]) * 16) + h2d(u.h.offset[1]);
+        Vcc_6V_Vpp_12V();
+        for ( i = 0; i < length * 2; i= i + 2){
+            high_byte = h2d(u.h.data[i]) * 16;
+            low_byte = h2d(u.h.data[i + 1]);
+            write_data = high_byte + low_byte; 
+            for(rty_cnt = 0; rty_cnt <= 25; rty_cnt++){
+                if(rty_cnt > 0) LED_RETRY = _HIGH;
+                read_data = ROM_write(a.hl_address[1], a.hl_address[0], write_data);
+                lcd.locate(0,0);
+                lcd.printf(" %03d %04X %02X %02X", line, a.address, write_data, read_data);
+                lcd.locate(0,1);
+                lcd.printf("              %02D", rty_cnt);
+                if(read_data == write_data) goto __NEXT_ADDRS;
+            }
+            goto __RTY_ERROR;
+            
+__NEXT_ADDRS:
+            LED_RETRY = _LOW;
+            a.address++;
+        }
+        Vcc_5V_Vpp_5V();    
+        cs = 0; 
+        i--;
+        high_byte = h2d(u.h.data[i + 1]) * 16;    
+        low_byte = h2d(u.h.data[i + 2]);
+        cs = high_byte + low_byte; 
+
+        //calc check sum
+        sum = 0;
+        for( i = 1; i < len - 3; i = i + 2){
+            high_byte = h2d(u.hex_line[i]);
+            high_byte = high_byte * 16;  
+            low_byte = h2d(u.hex_line[i + 1]);
+            sum = sum + high_byte + low_byte;      
+        }
+
+        if(((0x100 - (sum & 0xFF)) - cs) != 0) goto __CS_ERROR;
+
+    } //while(1)
+    lcd.locate(0,0);
+    lcd.printf("Success!        ");
+    return; 
+
+__HEX_FILE_OPEN_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("HEX File Open Er");
+    return;
+         
+__MARKER_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("Marker Error!");
+    return;
+    
+__CS_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("Check Sum Error!");
+    return;
+    
+__EOF:
+    lcd.locate(0,1);
+    lcd.printf("End Of File     ");
+    return;
+          
+__RTY_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("Retry Error ");
+    return;
+} //write_rom()
+
+void read_rom(){
+    uint8_t read_data;
+    
+    lcd.locate(0,0);
+    lcd.printf("READ from ROM   ");
+    get_btn();
+
+    if ( NULL == (fp = fopen( out_filename, "w" )) )
+        goto __OUT_FILE_OPEN_ERROR;
+            
+    Vcc_5V_Vpp_5V();
+    for(a.address = 0; a.address < MAX_ADDRESS; a.address++){
+        read_data = ROM_read(a.hl_address[1], a.hl_address[0]);
+        fprintf(fp, "%02X", read_data);
+        lcd.locate(0,1);
+        lcd.printf("%04X %02X         ", a.address, read_data);
+        //wait(2);
+    }
+    lcd.locate(0,0);
+    lcd.printf("Success!        ");
+    return;
+    
+__OUT_FILE_OPEN_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("Out File Open Er");
+    return;
+        
+} //read_rom
+
+void copy_rom(){
+    int rty_cnt;
+    char h_data, l_data;
+    uint8_t read_data, write_data;
+    
+    lcd.locate(0,0);
+    lcd.printf("COPY to ROM     ");
+    get_btn();
+ 
+    if ( NULL == (fp = fopen( in_filename, "r" )) )
+        goto __IN_FILE_OPEN_ERROR;
+            
+    Vcc_6V_Vpp_12V();
+    for(a.address = 0; a.address < MAX_ADDRESS; a.address++){
+        h_data = fgetc(fp);
+        l_data = fgetc(fp);
+        write_data = h2d(h_data) * 16 + h2d(l_data);
+        for(rty_cnt = 0; rty_cnt <= 25; rty_cnt++){
+            if(rty_cnt > 0) LED_RETRY = _HIGH;
+            read_data = ROM_write(a.hl_address[1], a.hl_address[0], write_data);
+            lcd.locate(0,1);
+            lcd.printf("%04X  %02X %02X   %2D", a.address, write_data, read_data, rty_cnt);
+            if(read_data == write_data) goto __NEXT_ADDRS;
+        }
+        goto __RTY_ERROR;        
+ 
+ __NEXT_ADDRS:    
+    }
+    lcd.locate(0,0);
+    lcd.printf("Success!        ");
+    return;
+
+__RTY_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("Retry Error");
+    return;
+        
+__IN_FILE_OPEN_ERROR:
+    lcd.locate(0,1);
+    lcd.printf("File Open Error ");
+    return;
+} //copy_rom
+
+void init(){
+    CE = _HIGH;
+    OE = _HIGH;
+    RD = _HIGH;
+    WR = _HIGH;
+    SET_WRITE;
+    DATA = 0;
+    ADRS = 0;
+    
+    Vcc_0V_Vpp_0V();
+        
+    LED_BUSY = _LOW;
+    LED_5V = _LOW;
+    LED_12V = _LOW;
+    LED_RETRY = _LOW;
+    
+    RESET = _LOW;
+    RESET = _HIGH;
+    wait_us(100);
+    RESET = _LOW;
+} //init()
+
+int main() {
+
+    init();
+    lcd.cls();
+    lcd.locate(0,0);
+    lcd.printf("EPROM Writter   ");
+    lcd.locate(0,1);
+    lcd.printf("MAX ADRS: %5d ", MAX_ADDRESS);
+    wait(3);
+    while(1){
+        switch(SW) {
+            case(0):
+                blank_check();
+                break;
+            case(1):
+                write_rom();
+                fclose( fp );
+                break;
+            case(2):
+                read_rom();
+                fclose( fp );
+                break;
+            case(3):
+                copy_rom();
+                fclose( fp );                
+                break;                  
+            default:
+                break;
+        } //switch(SW)
+        Vcc_0V_Vpp_0V();
+        wait(5);
+    } //while(1)
+} //main()

diff -r 000000000000 -r 979d71505352 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Wed Jun 22 12:39:03 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912