Diff: LM75B/LM75B.h

Revision:

25:ca1b1098c77f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LM75B/LM75B.h	Wed May 05 14:48:01 2021 +0000
@@ -0,0 +1,223 @@
+/* LM75B Driver Library
+ * Copyright (c) 2013 Neil Thiessen
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef LM75B_H
+#define LM75B_H
+
+#include "mbed.h"
+
+/** LM75B class.
+ *  Used for controlling an LM75B temperature sensor connected via I2C.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ * #include "LM75B.h"
+ *
+ * //Create an LM75B object at the default address (ADDRESS_0)
+ * LM75B sensor(p28, p27);
+ *
+ * int main()
+ * {
+ *     //Try to open the LM75B
+ *     if (sensor.open()) {
+ *         printf("Device detected!\n");
+ *
+ *         while (1) {
+ *             //Print the current temperature
+ *             printf("Temp = %.3f\n", (float)sensor);
+ *
+ *             //Sleep for 0.5 seconds
+ *             wait(0.5);
+ *         }
+ *     } else {
+ *         error("Device not detected!\n");
+ *     }
+ * }
+ * @endcode
+ */
+class LM75B
+{
+public:
+    /** Represents the different I2C address possibilities for the LM75B
+     */
+    enum Address {
+        ADDRESS_0 = (0x48 << 1),    /**< A[2:0] pins = 000 */
+        ADDRESS_1 = (0x49 << 1),    /**< A[2:0] pins = 001 */
+        ADDRESS_2 = (0x4A << 1),    /**< A[2:0] pins = 010 */
+        ADDRESS_3 = (0x4B << 1),    /**< A[2:0] pins = 011 */
+        ADDRESS_4 = (0x4C << 1),    /**< A[2:0] pins = 100 */
+        ADDRESS_5 = (0x4D << 1),    /**< A[2:0] pins = 101 */
+        ADDRESS_6 = (0x4E << 1),    /**< A[2:0] pins = 110 */
+        ADDRESS_7 = (0x4F << 1)     /**< A[2:0] pins = 111 */
+    };
+
+    /** Represents the power mode of the LM75B
+     */
+    enum PowerMode {
+        POWER_NORMAL,   /**< Chip is enabled and samples every 100ms */
+        POWER_SHUTDOWN  /**< Chip is in low-power shutdown mode */
+    };
+
+    /** Represents OS pin mode of the LM75B
+     */
+    enum OSMode {
+        OS_COMPARATOR,  /**< OS is asserted when the temperature reaches the alert threshold, and de-asserted when the temperature drops below the alert hysteresis threshold */
+        OS_INTERRUPT    /**< OS is asserted when the temperature reaches the alert threshold, or drops below the alert hysteresis threshold, and only de-asserted when a register has been read */
+    };
+
+    /** Represents OS pin polarity of the LM75B
+     */
+    enum OSPolarity {
+        OS_ACTIVE_LOW,  /**< OS is a logic low when asserted, and a logic high when de-asserted */
+        OS_ACTIVE_HIGH  /**< OS is a logic high when asserted, and a logic low when de-asserted */
+    };
+
+    /** Represents OS pin fault queue length of the LM75B
+     */
+    enum OSFaultQueue {
+        OS_FAULT_QUEUE_1,   /**< OS is asserted after 1 fault */
+        OS_FAULT_QUEUE_2,   /**< OS is asserted after 2 consecutive faults */
+        OS_FAULT_QUEUE_4,   /**< OS is asserted after 4 consecutive faults */
+        OS_FAULT_QUEUE_6    /**< OS is asserted after 6 consecutive faults */
+    };
+
+    /** Create an LM75B object connected to the specified I2C pins with the specified I2C slave address
+     *
+     * @param sda The I2C data pin.
+     * @param scl The I2C clock pin.
+     * @param addr The I2C slave address (defaults to ADDRESS_0).
+     * @param hz The I2C bus frequency (defaults to 400kHz).
+     */
+    LM75B(PinName sda, PinName scl, Address addr = ADDRESS_0, int hz = 400000);
+
+    /** Probe for the LM75B and indicate if it's present on the bus
+     *
+     * @returns
+     *   'true' if the device exists on the bus,
+     *   'false' if the device doesn't exist on the bus.
+     */
+    bool open();
+
+    /** Get the current power mode of the LM75B
+     *
+     * @returns The current power mode as a PowerMode enum.
+     */
+    LM75B::PowerMode powerMode();
+
+    /** Set the power mode of the LM75B
+     *
+     * @param mode The new power mode as a PowerMode enum.
+     */
+    void powerMode(PowerMode mode);
+
+    /** Get the current OS pin mode of the LM75B
+     *
+     * @returns The current OS pin mode as an OSMode enum.
+     */
+    LM75B::OSMode osMode();
+
+    /** Set the OS pin mode of the LM75B
+     *
+     * @param mode The new OS pin mode as an OSMode enum.
+     */
+    void osMode(OSMode mode);
+
+    /** Get the current OS pin polarity of the LM75B
+     *
+     * @returns The current OS pin polarity as an OSPolarity enum.
+     */
+    LM75B::OSPolarity osPolarity();
+
+    /** Set the OS pin polarity of the LM75B
+     *
+     * @param polarity The new OS pin polarity as an OSPolarity enum.
+     */
+    void osPolarity(OSPolarity polarity);
+
+    /** Get the current OS pin fault queue length of the LM75B
+     *
+     * @returns The current OS pin fault queue length as an OSFaultQueue enum.
+     */
+    LM75B::OSFaultQueue osFaultQueue();
+
+    /** Set the OS pin fault queue length of the LM75B
+     *
+     * @param queue The new OS pin fault queue length as an OSFaultQueue enum.
+     */
+    void osFaultQueue(OSFaultQueue queue);
+
+    /** Get the current alert temperature threshold of the LM75B
+     *
+     * @returns The current alert temperature threshold in °C.
+     */
+    float alertTemp();
+
+    /** Set the alert temperature threshold of the LM75B
+     *
+     * @param temp The new alert temperature threshold in °C.
+     */
+    void alertTemp(float temp);
+
+    /** Get the current alert temperature hysteresis threshold of the LM75B
+     *
+     * @returns The current alert temperature hysteresis threshold in °C.
+     */
+    float alertHyst();
+
+    /** Set the alert temperature hysteresis threshold of the LM75B
+     *
+     * @param temp The new alert temperature hysteresis threshold in °C.
+     */
+    void alertHyst(float temp);
+
+    /** Get the current temperature measurement of the LM75B
+     *
+     * @returns The current temperature measurement in °C.
+     */
+    float temp();
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for temp()
+     *
+     * @returns The current temperature measurement in °C.
+     */
+    operator float();
+#endif
+
+private:
+    //I2C register addresses
+    enum Register {
+        REG_TEMP    = 0x00,
+        REG_CONF    = 0x01,
+        REG_THYST   = 0x02,
+        REG_TOS     = 0x03
+    };
+
+    //Member variables
+    I2C m_I2C;
+    const int m_ADDR;
+
+    //Internal functions
+    char read8(char reg);
+    void write8(char reg, char data);
+    unsigned short read16(char reg);
+    void write16(char reg, unsigned short data);
+    float readAlertTempHelper(char reg);
+    void writeAlertTempHelper(char reg, float temp);
+};
+
+#endif