mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_crc_ex.c
- Revision:
- 237:f3da66175598
diff -r 6ac0938ee349 -r f3da66175598 targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_crc_ex.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_crc_ex.c Tue Jun 24 14:45:08 2014 +0100 @@ -0,0 +1,259 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_crc_ex.c + * @author MCD Application Team + * @version V1.0.1 + * @date 18-June-2014 + * @brief Extended CRC HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the CRC peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim +================================================================================ + ##### <Product specific features/integration> ##### +================================================================================ + + [..] < This section can contain: + (#) Description of the product specific implementation; all features + that is specific to this IP: separate clock for RTC/LCD/IWDG/ADC, + power domain (backup domain for the RTC)... + (#) IP main features, only when needed and not mandatory for all IPs, + ex. for xWDG, GPIO, COMP... + > + + [..] < You can add as much sections as needed.> + + [..] < You can add as much sections as needed.> + + + ##### How to use this driver ##### +================================================================================ + [..] + (+) Enable CRC AHB clock using __CRC_CLK_ENABLE(); + (+) Initialize CRC calculator + - specify generating polynomial (IP default or non-default one) + - specify initialization value (IP default or non-default one) + - specify input data format + - specify input or output data inversion mode if any + (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the + input data buffer starting with the previously computed CRC as + initialization value + (+) Use HAL_CRC_Calculate() function to compute the CRC value of the + input data buffer starting with the defined initialization value + (default or non-default) to initiate CRC calculation + + @endverbatim + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f3xx_hal.h" + +/** @addtogroup STM32F3xx_HAL_Driver + * @{ + */ + +/** @defgroup CRCEx + * @brief CRC Extended HAL module driver + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRCEx_Private_Functions + * @{ + */ + +/** @defgroup CRCEx_Group1 Extended Initialization/de-initialization functions + * @brief Extended Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP + (+) DeInitialize CRC MSP + +@endverbatim + * @{ + */ + + +/** + * @brief Initializes the CRC polynomial if different from default one. + * @param hcrc: CRC handle + * @param Pol: CRC generating polynomial (7, 8, 16 or 32-bit long) + * This parameter is written in normal representation, e.g. + * for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021 + * @param PolyLength: CRC polynomial length + * This parameter can be one of the following values: + * @arg CRC_POLYLENGTH_7B: 7-bit long CRC (generating polynomial of degree 7) + * @arg CRC_POLYLENGTH_8B: 8-bit long CRC (generating polynomial of degree 8) + * @arg CRC_POLYLENGTH_16B: 16-bit long CRC (generating polynomial of degree 16) + * @arg CRC_POLYLENGTH_32B: 32-bit long CRC (generating polynomial of degree 32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength) +{ + uint32_t msb = 31; /* polynomial degree is 32 at most, so msb is initialized to max value */ + + /* Check the parameters */ + assert_param(IS_CRC_POL_LENGTH(PolyLength)); + + /* check polynomial definition vs polynomial size: + * polynomial length must be aligned with polynomial + * definition. HAL_ERROR is reported if Pol degree is + * larger than that indicated by PolyLength. + * Look for MSB position: msb will contain the degree of + * the second to the largest polynomial member. E.g., for + * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */ + while (((Pol & (0x1 << msb)) == 0) && (msb-- > 0)); + + switch (PolyLength) + { + case CRC_POLYLENGTH_7B: + if (msb >= HAL_CRC_LENGTH_7B) return HAL_ERROR; + break; + case CRC_POLYLENGTH_8B: + if (msb >= HAL_CRC_LENGTH_8B) return HAL_ERROR; + break; + case CRC_POLYLENGTH_16B: + if (msb >= HAL_CRC_LENGTH_16B) return HAL_ERROR; + break; + case CRC_POLYLENGTH_32B: + /* no polynomial definition vs. polynomial length issue possible */ + break; + } + + /* set generating polynomial */ + WRITE_REG(hcrc->Instance->POL, Pol); + + /* set generating polynomial size */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Input data mode. + * @param hcrc: CRC handle + * @param InputReverseMode: Input Data inversion mode + * This parameter can be one of the following values: + * @arg CRC_INPUTDATA_NOINVERSION: no change in bit order (default value) + * @arg CRC_INPUTDATA_INVERSION_BYTE: Byte-wise bit reversal + * @arg CRC_INPUTDATA_INVERSION_HALFWORD: HalfWord-wise bit reversal + * @arg CRC_INPUTDATA_INVERSION_WORD: Word-wise bit reversal + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set input data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode); + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Output data mode. + * @param hcrc: CRC handle + * @param OutputReverseMode: Output Data inversion mode + * This parameter can be one of the following values: + * @arg CRC_OUTPUTDATA_INVERSION_DISABLED: no CRC inversion (default value) + * @arg CRC_OUTPUTDATA_INVERSION_ENABLED: bit-level inversion (e.g for a 8-bit CRC: 0xB5 becomes 0xAD) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set output data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + + + + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/