mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F100RB/stm32f10x_sdio.h
- Revision:
- 126:549ba18ddd81
diff -r 23cc3068a9e4 -r 549ba18ddd81 targets/cmsis/TARGET_STM/TARGET_DISCO_F100RB/stm32f10x_sdio.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_DISCO_F100RB/stm32f10x_sdio.h Wed Mar 19 16:00:09 2014 +0000 @@ -0,0 +1,546 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.h + * @author MCD Application Team + * @version V3.6.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the SDIO firmware + * library. + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SDIO_H +#define __STM32F10x_SDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/** @defgroup SDIO_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between 0x00 and 0xFF. */ + +} SDIO_InitTypeDef; + +typedef struct +{ + uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register */ + + uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ + + uint32_t SDIO_Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +} SDIO_CmdInitTypeDef; + +typedef struct +{ + uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +} SDIO_DataInitTypeDef; + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ + +#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) +#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ + ((EDGE) == SDIO_ClockEdge_Falling)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ + +#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) +#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ + ((BYPASS) == SDIO_ClockBypass_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ + +#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) +#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ + ((SAVE) == SDIO_ClockPowerSave_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ + +#define SDIO_BusWide_1b ((uint32_t)0x00000000) +#define SDIO_BusWide_4b ((uint32_t)0x00000800) +#define SDIO_BusWide_8b ((uint32_t)0x00001000) +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ + ((WIDE) == SDIO_BusWide_8b)) + +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ + +#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) +#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ + ((CONTROL) == SDIO_HardwareFlowControl_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Power_State + * @{ + */ + +#define SDIO_PowerState_OFF ((uint32_t)0x00000000) +#define SDIO_PowerState_ON ((uint32_t)0x00000003) +#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) +/** + * @} + */ + + +/** @defgroup SDIO_Interrupt_sources + * @{ + */ + +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ + +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ + +#define SDIO_Response_No ((uint32_t)0x00000000) +#define SDIO_Response_Short ((uint32_t)0x00000040) +#define SDIO_Response_Long ((uint32_t)0x000000C0) +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ + ((RESPONSE) == SDIO_Response_Short) || \ + ((RESPONSE) == SDIO_Response_Long)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ + +#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ +#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ +#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ + ((WAIT) == SDIO_Wait_Pend)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ + +#define SDIO_CPSM_Disable ((uint32_t)0x00000000) +#define SDIO_CPSM_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ + +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ + +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ + +#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) +#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) +#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) +#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) +#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) +#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) +#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) +#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) +#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) +#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) +#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) +#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) +#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) +#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) +#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ + ((SIZE) == SDIO_DataBlockSize_2b) || \ + ((SIZE) == SDIO_DataBlockSize_4b) || \ + ((SIZE) == SDIO_DataBlockSize_8b) || \ + ((SIZE) == SDIO_DataBlockSize_16b) || \ + ((SIZE) == SDIO_DataBlockSize_32b) || \ + ((SIZE) == SDIO_DataBlockSize_64b) || \ + ((SIZE) == SDIO_DataBlockSize_128b) || \ + ((SIZE) == SDIO_DataBlockSize_256b) || \ + ((SIZE) == SDIO_DataBlockSize_512b) || \ + ((SIZE) == SDIO_DataBlockSize_1024b) || \ + ((SIZE) == SDIO_DataBlockSize_2048b) || \ + ((SIZE) == SDIO_DataBlockSize_4096b) || \ + ((SIZE) == SDIO_DataBlockSize_8192b) || \ + ((SIZE) == SDIO_DataBlockSize_16384b)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ + +#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) +#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ + ((DIR) == SDIO_TransferDir_ToSDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ + +#define SDIO_TransferMode_Block ((uint32_t)0x00000000) +#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ + ((MODE) == SDIO_TransferMode_Block)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ + +#define SDIO_DPSM_Disable ((uint32_t)0x00000000) +#define SDIO_DPSM_Enable ((uint32_t)0x00000001) +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ + +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ + +#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) +#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ + ((MODE) == SDIO_ReadWaitMode_DATA2)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Functions + * @{ + */ + +void SDIO_DeInit(void); +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_ClockCmd(FunctionalState NewState); +void SDIO_SetPowerState(uint32_t SDIO_PowerState); +uint32_t SDIO_GetPowerState(void); +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); +void SDIO_DMACmd(FunctionalState NewState); +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(void); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(void); +uint32_t SDIO_ReadData(void); +void SDIO_WriteData(uint32_t Data); +uint32_t SDIO_GetFIFOCount(void); +void SDIO_StartSDIOReadWait(FunctionalState NewState); +void SDIO_StopSDIOReadWait(FunctionalState NewState); +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); +void SDIO_SetSDIOOperation(FunctionalState NewState); +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); +void SDIO_CommandCompletionCmd(FunctionalState NewState); +void SDIO_CEATAITCmd(FunctionalState NewState); +void SDIO_SendCEATACmd(FunctionalState NewState); +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); +void SDIO_ClearFlag(uint32_t SDIO_FLAG); +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); +void SDIO_ClearITPendingBit(uint32_t SDIO_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_SDIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/