mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC11UXX/serial_api.c@274:6937b19af361, 2014-08-06 (annotated)
- Committer:
- mbed_official
- Date:
- Wed Aug 06 08:15:07 2014 +0100
- Revision:
- 274:6937b19af361
- Parent:
- 243:1b2bee05fe98
Synchronized with git revision 5b145e4f6c509376173c3ea2aa35a6da879a2124
Full URL: https://github.com/mbedmicro/mbed/commit/5b145e4f6c509376173c3ea2aa35a6da879a2124/
[TARGET_LPC11UXX] PeripheralNames.h and PinMap definitions separation for LPC11UXX platforms
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
bogdanm | 13:0645d8841f51 | 1 | /* mbed Microcontroller Library |
bogdanm | 13:0645d8841f51 | 2 | * Copyright (c) 2006-2013 ARM Limited |
bogdanm | 13:0645d8841f51 | 3 | * |
bogdanm | 13:0645d8841f51 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
bogdanm | 13:0645d8841f51 | 5 | * you may not use this file except in compliance with the License. |
bogdanm | 13:0645d8841f51 | 6 | * You may obtain a copy of the License at |
bogdanm | 13:0645d8841f51 | 7 | * |
bogdanm | 13:0645d8841f51 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
bogdanm | 13:0645d8841f51 | 9 | * |
bogdanm | 13:0645d8841f51 | 10 | * Unless required by applicable law or agreed to in writing, software |
bogdanm | 13:0645d8841f51 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
bogdanm | 13:0645d8841f51 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
bogdanm | 13:0645d8841f51 | 13 | * See the License for the specific language governing permissions and |
bogdanm | 13:0645d8841f51 | 14 | * limitations under the License. |
bogdanm | 13:0645d8841f51 | 15 | */ |
bogdanm | 13:0645d8841f51 | 16 | // math.h required for floating point operations for baud rate calculation |
bogdanm | 13:0645d8841f51 | 17 | #include <math.h> |
bogdanm | 13:0645d8841f51 | 18 | #include <string.h> |
mbed_official | 140:ca60b7a31055 | 19 | #include <stdlib.h> |
bogdanm | 13:0645d8841f51 | 20 | |
bogdanm | 13:0645d8841f51 | 21 | #include "serial_api.h" |
bogdanm | 13:0645d8841f51 | 22 | #include "cmsis.h" |
bogdanm | 13:0645d8841f51 | 23 | #include "pinmap.h" |
mbed_official | 274:6937b19af361 | 24 | #include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform |
bogdanm | 13:0645d8841f51 | 25 | |
bogdanm | 13:0645d8841f51 | 26 | /****************************************************************************** |
bogdanm | 13:0645d8841f51 | 27 | * INITIALIZATION |
bogdanm | 13:0645d8841f51 | 28 | ******************************************************************************/ |
bogdanm | 13:0645d8841f51 | 29 | #define UART_NUM 1 |
bogdanm | 13:0645d8841f51 | 30 | |
bogdanm | 13:0645d8841f51 | 31 | static uint32_t serial_irq_ids[UART_NUM] = {0}; |
bogdanm | 13:0645d8841f51 | 32 | static uart_irq_handler irq_handler; |
bogdanm | 13:0645d8841f51 | 33 | |
bogdanm | 13:0645d8841f51 | 34 | int stdio_uart_inited = 0; |
bogdanm | 13:0645d8841f51 | 35 | serial_t stdio_uart; |
bogdanm | 13:0645d8841f51 | 36 | |
bogdanm | 13:0645d8841f51 | 37 | void serial_init(serial_t *obj, PinName tx, PinName rx) { |
bogdanm | 13:0645d8841f51 | 38 | int is_stdio_uart = 0; |
bogdanm | 13:0645d8841f51 | 39 | |
bogdanm | 13:0645d8841f51 | 40 | // determine the UART to use |
bogdanm | 13:0645d8841f51 | 41 | UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX); |
bogdanm | 13:0645d8841f51 | 42 | UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX); |
bogdanm | 13:0645d8841f51 | 43 | UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx); |
mbed_official | 227:7bd0639b8911 | 44 | MBED_ASSERT((int)uart != NC); |
mbed_official | 227:7bd0639b8911 | 45 | |
bogdanm | 13:0645d8841f51 | 46 | obj->uart = (LPC_USART_Type *)uart; |
bogdanm | 13:0645d8841f51 | 47 | LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12); |
bogdanm | 13:0645d8841f51 | 48 | |
bogdanm | 13:0645d8841f51 | 49 | // [TODO] Consider more elegant approach |
bogdanm | 13:0645d8841f51 | 50 | // disconnect USBTX/RX mapping mux, for case when switching ports |
mbed_official | 59:ef93cc6bbf65 | 51 | #ifdef USBTX |
bogdanm | 13:0645d8841f51 | 52 | pin_function(USBTX, 0); |
bogdanm | 13:0645d8841f51 | 53 | pin_function(USBRX, 0); |
mbed_official | 59:ef93cc6bbf65 | 54 | #endif |
mbed_official | 59:ef93cc6bbf65 | 55 | |
bogdanm | 13:0645d8841f51 | 56 | // enable fifos and default rx trigger level |
bogdanm | 13:0645d8841f51 | 57 | obj->uart->FCR = 1 << 0 // FIFO Enable - 0 = Disables, 1 = Enabled |
bogdanm | 13:0645d8841f51 | 58 | | 0 << 1 // Rx Fifo Reset |
bogdanm | 13:0645d8841f51 | 59 | | 0 << 2 // Tx Fifo Reset |
bogdanm | 13:0645d8841f51 | 60 | | 0 << 6; // Rx irq trigger level - 0 = 1 char, 1 = 4 chars, 2 = 8 chars, 3 = 14 chars |
bogdanm | 13:0645d8841f51 | 61 | |
bogdanm | 13:0645d8841f51 | 62 | // disable irqs |
bogdanm | 13:0645d8841f51 | 63 | obj->uart->IER = 0 << 0 // Rx Data available irq enable |
bogdanm | 13:0645d8841f51 | 64 | | 0 << 1 // Tx Fifo empty irq enable |
bogdanm | 13:0645d8841f51 | 65 | | 0 << 2; // Rx Line Status irq enable |
bogdanm | 13:0645d8841f51 | 66 | |
bogdanm | 13:0645d8841f51 | 67 | // set default baud rate and format |
bogdanm | 13:0645d8841f51 | 68 | serial_baud (obj, 9600); |
bogdanm | 13:0645d8841f51 | 69 | serial_format(obj, 8, ParityNone, 1); |
bogdanm | 13:0645d8841f51 | 70 | |
bogdanm | 13:0645d8841f51 | 71 | // pinout the chosen uart |
bogdanm | 13:0645d8841f51 | 72 | pinmap_pinout(tx, PinMap_UART_TX); |
bogdanm | 13:0645d8841f51 | 73 | pinmap_pinout(rx, PinMap_UART_RX); |
bogdanm | 13:0645d8841f51 | 74 | |
bogdanm | 13:0645d8841f51 | 75 | // set rx/tx pins in PullUp mode |
bogdanm | 13:0645d8841f51 | 76 | pin_mode(tx, PullUp); |
bogdanm | 13:0645d8841f51 | 77 | pin_mode(rx, PullUp); |
bogdanm | 13:0645d8841f51 | 78 | |
bogdanm | 13:0645d8841f51 | 79 | switch (uart) { |
bogdanm | 13:0645d8841f51 | 80 | case UART_0: obj->index = 0; break; |
bogdanm | 13:0645d8841f51 | 81 | } |
bogdanm | 13:0645d8841f51 | 82 | |
bogdanm | 13:0645d8841f51 | 83 | is_stdio_uart = (uart == STDIO_UART) ? (1) : (0); |
bogdanm | 13:0645d8841f51 | 84 | |
bogdanm | 13:0645d8841f51 | 85 | if (is_stdio_uart) { |
bogdanm | 13:0645d8841f51 | 86 | stdio_uart_inited = 1; |
bogdanm | 13:0645d8841f51 | 87 | memcpy(&stdio_uart, obj, sizeof(serial_t)); |
bogdanm | 13:0645d8841f51 | 88 | } |
bogdanm | 13:0645d8841f51 | 89 | } |
bogdanm | 13:0645d8841f51 | 90 | |
bogdanm | 13:0645d8841f51 | 91 | void serial_free(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 92 | serial_irq_ids[obj->index] = 0; |
bogdanm | 13:0645d8841f51 | 93 | } |
bogdanm | 13:0645d8841f51 | 94 | |
bogdanm | 13:0645d8841f51 | 95 | // serial_baud |
bogdanm | 13:0645d8841f51 | 96 | // set the baud rate, taking in to account the current SystemFrequency |
bogdanm | 13:0645d8841f51 | 97 | void serial_baud(serial_t *obj, int baudrate) { |
bogdanm | 13:0645d8841f51 | 98 | LPC_SYSCON->UARTCLKDIV = 0x1; |
bogdanm | 13:0645d8841f51 | 99 | uint32_t PCLK = SystemCoreClock; |
bogdanm | 13:0645d8841f51 | 100 | // First we check to see if the basic divide with no DivAddVal/MulVal |
bogdanm | 13:0645d8841f51 | 101 | // ratio gives us an integer result. If it does, we set DivAddVal = 0, |
bogdanm | 13:0645d8841f51 | 102 | // MulVal = 1. Otherwise, we search the valid ratio value range to find |
bogdanm | 13:0645d8841f51 | 103 | // the closest match. This could be more elegant, using search methods |
bogdanm | 13:0645d8841f51 | 104 | // and/or lookup tables, but the brute force method is not that much |
bogdanm | 13:0645d8841f51 | 105 | // slower, and is more maintainable. |
bogdanm | 13:0645d8841f51 | 106 | uint16_t DL = PCLK / (16 * baudrate); |
bogdanm | 13:0645d8841f51 | 107 | |
bogdanm | 13:0645d8841f51 | 108 | uint8_t DivAddVal = 0; |
bogdanm | 13:0645d8841f51 | 109 | uint8_t MulVal = 1; |
bogdanm | 13:0645d8841f51 | 110 | int hit = 0; |
bogdanm | 13:0645d8841f51 | 111 | uint16_t dlv; |
bogdanm | 13:0645d8841f51 | 112 | uint8_t mv, dav; |
bogdanm | 13:0645d8841f51 | 113 | if ((PCLK % (16 * baudrate)) != 0) { // Checking for zero remainder |
mbed_official | 51:7838415c99e7 | 114 | int err_best = baudrate, b; |
mbed_official | 51:7838415c99e7 | 115 | for (mv = 1; mv < 16 && !hit; mv++) |
mbed_official | 51:7838415c99e7 | 116 | { |
mbed_official | 51:7838415c99e7 | 117 | for (dav = 0; dav < mv; dav++) |
mbed_official | 51:7838415c99e7 | 118 | { |
mbed_official | 51:7838415c99e7 | 119 | // baudrate = PCLK / (16 * dlv * (1 + (DivAdd / Mul)) |
mbed_official | 51:7838415c99e7 | 120 | // solving for dlv, we get dlv = mul * PCLK / (16 * baudrate * (divadd + mul)) |
mbed_official | 51:7838415c99e7 | 121 | // mul has 4 bits, PCLK has 27 so we have 1 bit headroom which can be used for rounding |
mbed_official | 51:7838415c99e7 | 122 | // for many values of mul and PCLK we have 2 or more bits of headroom which can be used to improve precision |
mbed_official | 51:7838415c99e7 | 123 | // note: X / 32 doesn't round correctly. Instead, we use ((X / 16) + 1) / 2 for correct rounding |
mbed_official | 51:7838415c99e7 | 124 | |
mbed_official | 51:7838415c99e7 | 125 | if ((mv * PCLK * 2) & 0x80000000) // 1 bit headroom |
mbed_official | 51:7838415c99e7 | 126 | dlv = ((((2 * mv * PCLK) / (baudrate * (dav + mv))) / 16) + 1) / 2; |
mbed_official | 51:7838415c99e7 | 127 | else // 2 bits headroom, use more precision |
mbed_official | 51:7838415c99e7 | 128 | dlv = ((((4 * mv * PCLK) / (baudrate * (dav + mv))) / 32) + 1) / 2; |
mbed_official | 51:7838415c99e7 | 129 | |
mbed_official | 51:7838415c99e7 | 130 | // datasheet says if DLL==DLM==0, then 1 is used instead since divide by zero is ungood |
mbed_official | 51:7838415c99e7 | 131 | if (dlv == 0) |
mbed_official | 51:7838415c99e7 | 132 | dlv = 1; |
mbed_official | 51:7838415c99e7 | 133 | |
mbed_official | 51:7838415c99e7 | 134 | // datasheet says if dav > 0 then DL must be >= 2 |
mbed_official | 51:7838415c99e7 | 135 | if ((dav > 0) && (dlv < 2)) |
mbed_official | 51:7838415c99e7 | 136 | dlv = 2; |
mbed_official | 51:7838415c99e7 | 137 | |
mbed_official | 51:7838415c99e7 | 138 | // integer rearrangement of the baudrate equation (with rounding) |
mbed_official | 51:7838415c99e7 | 139 | b = ((PCLK * mv / (dlv * (dav + mv) * 8)) + 1) / 2; |
mbed_official | 51:7838415c99e7 | 140 | |
mbed_official | 51:7838415c99e7 | 141 | // check to see how we went |
mbed_official | 51:7838415c99e7 | 142 | b = abs(b - baudrate); |
mbed_official | 51:7838415c99e7 | 143 | if (b < err_best) |
mbed_official | 51:7838415c99e7 | 144 | { |
mbed_official | 51:7838415c99e7 | 145 | err_best = b; |
mbed_official | 51:7838415c99e7 | 146 | |
mbed_official | 51:7838415c99e7 | 147 | DL = dlv; |
mbed_official | 51:7838415c99e7 | 148 | MulVal = mv; |
mbed_official | 51:7838415c99e7 | 149 | DivAddVal = dav; |
mbed_official | 51:7838415c99e7 | 150 | |
mbed_official | 51:7838415c99e7 | 151 | if (b == baudrate) |
mbed_official | 51:7838415c99e7 | 152 | { |
mbed_official | 51:7838415c99e7 | 153 | hit = 1; |
mbed_official | 51:7838415c99e7 | 154 | break; |
bogdanm | 13:0645d8841f51 | 155 | } |
bogdanm | 13:0645d8841f51 | 156 | } |
bogdanm | 13:0645d8841f51 | 157 | } |
bogdanm | 13:0645d8841f51 | 158 | } |
bogdanm | 13:0645d8841f51 | 159 | } |
bogdanm | 13:0645d8841f51 | 160 | |
bogdanm | 13:0645d8841f51 | 161 | // set LCR[DLAB] to enable writing to divider registers |
bogdanm | 13:0645d8841f51 | 162 | obj->uart->LCR |= (1 << 7); |
bogdanm | 13:0645d8841f51 | 163 | |
bogdanm | 13:0645d8841f51 | 164 | // set divider values |
bogdanm | 13:0645d8841f51 | 165 | obj->uart->DLM = (DL >> 8) & 0xFF; |
bogdanm | 13:0645d8841f51 | 166 | obj->uart->DLL = (DL >> 0) & 0xFF; |
bogdanm | 13:0645d8841f51 | 167 | obj->uart->FDR = (uint32_t) DivAddVal << 0 |
bogdanm | 13:0645d8841f51 | 168 | | (uint32_t) MulVal << 4; |
bogdanm | 13:0645d8841f51 | 169 | |
bogdanm | 13:0645d8841f51 | 170 | // clear LCR[DLAB] |
bogdanm | 13:0645d8841f51 | 171 | obj->uart->LCR &= ~(1 << 7); |
bogdanm | 13:0645d8841f51 | 172 | } |
bogdanm | 13:0645d8841f51 | 173 | |
bogdanm | 13:0645d8841f51 | 174 | void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) { |
mbed_official | 227:7bd0639b8911 | 175 | MBED_ASSERT((stop_bits == 1) || (stop_bits == 2)); // 0: 1 stop bits, 1: 2 stop bits |
mbed_official | 227:7bd0639b8911 | 176 | MBED_ASSERT((data_bits > 4) && (data_bits < 9)); // 0: 5 data bits ... 3: 8 data bits |
mbed_official | 227:7bd0639b8911 | 177 | MBED_ASSERT((parity == ParityNone) || (parity == ParityOdd) || (parity == ParityEven) || |
mbed_official | 227:7bd0639b8911 | 178 | (parity == ParityForced1) || (parity == ParityForced0)); |
mbed_official | 227:7bd0639b8911 | 179 | |
bogdanm | 13:0645d8841f51 | 180 | stop_bits -= 1; |
bogdanm | 13:0645d8841f51 | 181 | data_bits -= 5; |
bogdanm | 13:0645d8841f51 | 182 | |
mbed_official | 243:1b2bee05fe98 | 183 | int parity_enable = 0, parity_select = 0; |
bogdanm | 13:0645d8841f51 | 184 | switch (parity) { |
bogdanm | 13:0645d8841f51 | 185 | case ParityNone: parity_enable = 0; parity_select = 0; break; |
bogdanm | 13:0645d8841f51 | 186 | case ParityOdd : parity_enable = 1; parity_select = 0; break; |
bogdanm | 13:0645d8841f51 | 187 | case ParityEven: parity_enable = 1; parity_select = 1; break; |
bogdanm | 13:0645d8841f51 | 188 | case ParityForced1: parity_enable = 1; parity_select = 2; break; |
bogdanm | 13:0645d8841f51 | 189 | case ParityForced0: parity_enable = 1; parity_select = 3; break; |
bogdanm | 13:0645d8841f51 | 190 | default: |
mbed_official | 227:7bd0639b8911 | 191 | break; |
bogdanm | 13:0645d8841f51 | 192 | } |
bogdanm | 13:0645d8841f51 | 193 | |
bogdanm | 13:0645d8841f51 | 194 | obj->uart->LCR = data_bits << 0 |
bogdanm | 13:0645d8841f51 | 195 | | stop_bits << 2 |
bogdanm | 13:0645d8841f51 | 196 | | parity_enable << 3 |
bogdanm | 13:0645d8841f51 | 197 | | parity_select << 4; |
bogdanm | 13:0645d8841f51 | 198 | } |
bogdanm | 13:0645d8841f51 | 199 | |
bogdanm | 13:0645d8841f51 | 200 | /****************************************************************************** |
bogdanm | 13:0645d8841f51 | 201 | * INTERRUPTS HANDLING |
bogdanm | 13:0645d8841f51 | 202 | ******************************************************************************/ |
bogdanm | 13:0645d8841f51 | 203 | static inline void uart_irq(uint32_t iir, uint32_t index) { |
bogdanm | 13:0645d8841f51 | 204 | // [Chapter 14] LPC17xx UART0/2/3: UARTn Interrupt Handling |
bogdanm | 13:0645d8841f51 | 205 | SerialIrq irq_type; |
bogdanm | 13:0645d8841f51 | 206 | switch (iir) { |
bogdanm | 13:0645d8841f51 | 207 | case 1: irq_type = TxIrq; break; |
bogdanm | 13:0645d8841f51 | 208 | case 2: irq_type = RxIrq; break; |
bogdanm | 13:0645d8841f51 | 209 | default: return; |
bogdanm | 13:0645d8841f51 | 210 | } |
bogdanm | 13:0645d8841f51 | 211 | |
bogdanm | 13:0645d8841f51 | 212 | if (serial_irq_ids[index] != 0) |
bogdanm | 13:0645d8841f51 | 213 | irq_handler(serial_irq_ids[index], irq_type); |
bogdanm | 13:0645d8841f51 | 214 | } |
bogdanm | 13:0645d8841f51 | 215 | |
bogdanm | 13:0645d8841f51 | 216 | void uart0_irq() {uart_irq((LPC_USART->IIR >> 1) & 0x7, 0);} |
bogdanm | 13:0645d8841f51 | 217 | |
bogdanm | 13:0645d8841f51 | 218 | void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) { |
bogdanm | 13:0645d8841f51 | 219 | irq_handler = handler; |
bogdanm | 13:0645d8841f51 | 220 | serial_irq_ids[obj->index] = id; |
bogdanm | 13:0645d8841f51 | 221 | } |
bogdanm | 13:0645d8841f51 | 222 | |
bogdanm | 13:0645d8841f51 | 223 | void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) { |
bogdanm | 13:0645d8841f51 | 224 | IRQn_Type irq_n = (IRQn_Type)0; |
bogdanm | 13:0645d8841f51 | 225 | uint32_t vector = 0; |
bogdanm | 13:0645d8841f51 | 226 | switch ((int)obj->uart) { |
bogdanm | 13:0645d8841f51 | 227 | case UART_0: irq_n=UART_IRQn ; vector = (uint32_t)&uart0_irq; break; |
bogdanm | 13:0645d8841f51 | 228 | } |
bogdanm | 13:0645d8841f51 | 229 | |
bogdanm | 13:0645d8841f51 | 230 | if (enable) { |
bogdanm | 13:0645d8841f51 | 231 | obj->uart->IER |= 1 << irq; |
bogdanm | 13:0645d8841f51 | 232 | NVIC_SetVector(irq_n, vector); |
bogdanm | 13:0645d8841f51 | 233 | NVIC_EnableIRQ(irq_n); |
bogdanm | 13:0645d8841f51 | 234 | } else { // disable |
bogdanm | 13:0645d8841f51 | 235 | int all_disabled = 0; |
bogdanm | 13:0645d8841f51 | 236 | SerialIrq other_irq = (irq == RxIrq) ? (TxIrq) : (RxIrq); |
bogdanm | 13:0645d8841f51 | 237 | |
bogdanm | 13:0645d8841f51 | 238 | obj->uart->IER &= ~(1 << irq); |
bogdanm | 13:0645d8841f51 | 239 | all_disabled = (obj->uart->IER & (1 << other_irq)) == 0; |
bogdanm | 13:0645d8841f51 | 240 | |
bogdanm | 13:0645d8841f51 | 241 | if (all_disabled) |
bogdanm | 13:0645d8841f51 | 242 | NVIC_DisableIRQ(irq_n); |
bogdanm | 13:0645d8841f51 | 243 | } |
bogdanm | 13:0645d8841f51 | 244 | } |
bogdanm | 13:0645d8841f51 | 245 | |
bogdanm | 13:0645d8841f51 | 246 | /****************************************************************************** |
bogdanm | 13:0645d8841f51 | 247 | * READ/WRITE |
bogdanm | 13:0645d8841f51 | 248 | ******************************************************************************/ |
bogdanm | 13:0645d8841f51 | 249 | int serial_getc(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 250 | while (!serial_readable(obj)); |
bogdanm | 13:0645d8841f51 | 251 | return obj->uart->RBR; |
bogdanm | 13:0645d8841f51 | 252 | } |
bogdanm | 13:0645d8841f51 | 253 | |
bogdanm | 13:0645d8841f51 | 254 | void serial_putc(serial_t *obj, int c) { |
bogdanm | 13:0645d8841f51 | 255 | while (!serial_writable(obj)); |
bogdanm | 13:0645d8841f51 | 256 | obj->uart->THR = c; |
bogdanm | 13:0645d8841f51 | 257 | } |
bogdanm | 13:0645d8841f51 | 258 | |
bogdanm | 13:0645d8841f51 | 259 | int serial_readable(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 260 | return obj->uart->LSR & 0x01; |
bogdanm | 13:0645d8841f51 | 261 | } |
bogdanm | 13:0645d8841f51 | 262 | |
bogdanm | 13:0645d8841f51 | 263 | int serial_writable(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 264 | return obj->uart->LSR & 0x20; |
bogdanm | 13:0645d8841f51 | 265 | } |
bogdanm | 13:0645d8841f51 | 266 | |
bogdanm | 13:0645d8841f51 | 267 | void serial_clear(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 268 | obj->uart->FCR = 1 << 1 // rx FIFO reset |
bogdanm | 13:0645d8841f51 | 269 | | 1 << 2 // tx FIFO reset |
bogdanm | 13:0645d8841f51 | 270 | | 0 << 6; // interrupt depth |
bogdanm | 13:0645d8841f51 | 271 | } |
bogdanm | 13:0645d8841f51 | 272 | |
bogdanm | 13:0645d8841f51 | 273 | void serial_pinout_tx(PinName tx) { |
bogdanm | 13:0645d8841f51 | 274 | pinmap_pinout(tx, PinMap_UART_TX); |
bogdanm | 13:0645d8841f51 | 275 | } |
bogdanm | 13:0645d8841f51 | 276 | |
bogdanm | 13:0645d8841f51 | 277 | void serial_break_set(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 278 | obj->uart->LCR |= (1 << 6); |
bogdanm | 13:0645d8841f51 | 279 | } |
bogdanm | 13:0645d8841f51 | 280 | |
bogdanm | 13:0645d8841f51 | 281 | void serial_break_clear(serial_t *obj) { |
bogdanm | 13:0645d8841f51 | 282 | obj->uart->LCR &= ~(1 << 6); |
bogdanm | 13:0645d8841f51 | 283 | } |
bogdanm | 13:0645d8841f51 | 284 |