mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_comp_ex.h
- Committer:
- mbed_official
- Date:
- 2014-06-24
- Revision:
- 237:f3da66175598
File content as of revision 237:f3da66175598:
/** ****************************************************************************** * @file stm32f3xx_hal_comp_ex.h * @author MCD Application Team * @version V1.0.1 * @date 18-June-2014 * @brief Header file of COMP HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_COMP_EX_H #define __STM32F3xx_HAL_COMP_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal_def.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup COMPEx * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @addtogroup COMPEx_Exported_Constants * @{ */ #if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) /** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices) * @{ */ #define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3, PE8 for COMP4, PD13 for COMP5, PD10 for COMP6, PC0 for COMP7) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_IO2 COMP_CSR_COMPxINSEL /*!< I/O2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5, PB15 for COMP6) connected to comparator inverting input */ /* Aliases for compatibility */ #define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1 #define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2 #define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \ ((INPUT) == COMP_INVERTINGINPUT_IO2)) /** * @} */ #elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) /** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices) * @{ */ #define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6) connected to comparator inverting input */ /* Aliases for compatibility */ #define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1 #define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \ ((INPUT) == COMP_INVERTINGINPUT_IO1)) /** * @} */ #elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) /** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F303x8/STM32F334x8/STM32F328xx Product devices) * @{ */ #define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC2_CH1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_CH1_OUT connected to comparator inverting input */ /* Aliases for compatibility */ #define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1 #define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2 #define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1)) /** * @} */ #elif defined(STM32F373xC) || defined(STM32F378xx) /** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F373xC/STM32F378xx Product devices) * @{ */ #define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_1_2VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_0) /*!< 1/2 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_3_4VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_1) /*!< 3/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_VREFINT ((uint32_t)(COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0)) /*!< VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH1 ((uint32_t)COMP_CSR_COMPxINSEL_2) /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1_CH2 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0)) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_IO1 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1)) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC2_CH1 ((uint32_t)COMP_CSR_COMPxINSEL) /*!< DAC2_CH1_OUT connected to comparator inverting input */ /* Aliases for compatibility */ #define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1 #define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2 #define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1)) /** * @} */ #endif /* STM32F302xC || STM32F303xC || STM32F358xx */ #if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) /** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices) * @{ */ #define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3, PB0 for COMP4, PD12 for COMP5, PD11 for COMP6, PA0 for COMP7) connected to comparator non inverting input */ #define COMP_NONINVERTINGINPUT_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5, PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */ #define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */ #define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)) /* STM32F302xB/xC, STM32F303xB/xC, STM32F358xx devices comparator instances non inverting source values */ #define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \ ((((INSTANCE) == COMP1) && \ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \ || \ ((((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_IO2)))) #define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMPxNONINSEL | COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */ /** * @} */ #elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) /** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices) * @{ */ #define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6) connected to comparator non inverting input */ #define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP2_CSR_COMP2INPDAC /*!< DAC ouput connected to comparator COMP2 non inverting input */ #define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)) /* STM32F301x6/x8, STM32F302x6/x8, STM32F318xx devices comparator instances non inverting source values */ #define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \ ((((INSTANCE) == COMP2) && \ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \ || \ (((INPUT) == COMP_NONINVERTINGINPUT_IO1))) #define COMP_CSR_COMPxNONINSEL_MASK (COMP2_CSR_COMP2INPDAC) /*!< COMP_CSR_COMPxNONINSEL mask */ /** * @} */ #elif defined(STM32F373xC) || defined(STM32F378xx) /** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (STM32F373xC/STM32F378xx Product devices) * @{ */ #define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2) connected to comparator non inverting input */ #define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */ #define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)) /* STM32F373xB/xC, STM32F378xx devices comparator instances non inverting source values */ #define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \ ((((INSTANCE) == COMP1) && \ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \ || \ (((INPUT) == COMP_NONINVERTINGINPUT_IO1))) #define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */ /** * @} */ #else /** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (Other Product devices) * @{ */ #define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6) connected to comparator non inverting input */ /*!< Non inverting input not available */ #define IS_COMP_NONINVERTINGINPUT(INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */ #define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */ #define COMP_CSR_COMPxNONINSEL_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */ /** * @} */ #endif /* STM32F302xC || STM32F303xC || STM32F358xx */ #if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) /** @defgroup COMPEx_Output COMPEx_Output (STM32F302xC/STM32F303xC/STM32F358xx Product devices) * @{ */ #define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ /* Output Redirection common for all comparators COMP1...COMP7 */ #define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ #define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */ #define COMP_OUTPUT_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */ #define COMP_OUTPUT_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */ #define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */ /* Output Redirection common for COMP1, COMP2 and COMP3 */ #define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */ /* Output Redirection common for COMP1 and COMP2 */ #define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */ #define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */ #define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */ #define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */ #define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ /* Output Redirection specific to COMP3 */ #define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */ #define COMP_OUTPUT_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */ #define COMP_OUTPUT_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */ #define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */ /* Output Redirection specific to COMP4 */ #define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */ #define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */ #define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */ #define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */ #define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */ #define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ /* Output Redirection specific to COMP5 */ #define COMP_OUTPUT_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */ #define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */ #define COMP_OUTPUT_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */ #define COMP_OUTPUT_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */ #define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */ #define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ /* Output Redirection specific to COMP6 */ #define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */ #define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */ #define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */ #define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */ #define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */ #define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */ /* Output Redirection specific to COMP7 */ #define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */ #define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */ #define COMP_OUTPUT_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */ #define COMP_OUTPUT_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */ #define COMP_OUTPUT_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */ #define COMP_OUTPUT_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */ #define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \ ((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \ ((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR)) /** * @} */ #elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) /** @defgroup COMPEx_Output COMPEx_Output (STM32F301x8/STM32F302x8/STM32F318xx Product devices) * @{ */ #define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ /* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */ #define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ #define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */ /* Output Redirection specific to COMP2 */ #define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */ #define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */ #define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */ #define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */ /* Output Redirection specific to COMP4 */ #define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */ #define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */ /* Output Redirection specific to COMP6 */ #define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */ #define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */ #define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */ #define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */ #define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR)) /** * @} */ #elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) /** @defgroup COMPEx_Output COMPEx_Output (STM32F303x8/STM32F334x8/STM32F328xx Product devices) * @{ */ #define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ /* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */ #define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ #define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */ /* Output Redirection specific to COMP2 */ #define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */ #define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */ #define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */ #define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */ #define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */ #define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ /* Output Redirection specific to COMP4 */ #define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */ #define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */ #define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */ #define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ /* Output Redirection specific to COMP6 */ #define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */ #define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */ #define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */ #define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */ #define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR)) /** * @} */ #else /** @defgroup COMPEx_Output COMPEx_Output (STM32F373xC/STM32F378xx Product devices) * @{ */ /* Output Redirection common for all comparators COMP1 and COMP2 */ #define COMP_OUTPUT_NONE ((uint32_t)0x0000) /*!< COMP output isn't connected to other peripherals */ #define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM1 Input Capture 1 */ #define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM3 OCREF Clear */ #define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x0400) /*!< COMP output connected to TIM2 Input Capture 4 */ #define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP output connected to TIM2 OCREF Clear */ /* Output Redirection specific to COMP1 */ #define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM15 Break Input */ #define COMP_OUTPUT_TIM5IC4 ((uint32_t)0x0600) /*!< COMP output connected to TIM5 Input Capture 4 */ #define COMP_OUTPUT_TIM5OCREFCLR ((uint32_t)0x0700) /*!< COMP output connected to TIM5 OCREF Clear */ /* Output Redirection specific to COMP2 */ #define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM16 Break Input */ #define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM4 Input Capture 1 */ #define COMP_OUTPUT_TIM4OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM4 OCREF Clear */ #define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM5IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM5OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN)) /** * @} */ #endif /* STM32F302xC || STM32F303xC || STM32F358xx */ #if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) /** @defgroup COMPEx_WindowMode COMPEx_WindowMode (STM32F302xC/STM32F303xC/STM32F358xx Product devices) * @{ */ #define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */ #define COMP_WINDOWMODE_ENABLED COMP_CSR_COMPxWNDWEN /*!< Window mode enabled: non inverting input of comparator X (x=2,4,6) is connected to the non inverting input of comparator X-1 */ #define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED)) #define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */ /** * @} */ #elif defined(STM32F373xC) || defined(STM32F378xx) /** @defgroup COMPEx_WindowMode COMPEx_WindowMode (STM32F373xC/STM32F378xx Product devices) * @{ */ #define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */ #define COMP_WINDOWMODE_ENABLED ((uint32_t)COMP_CSR_COMPxWNDWEN) /*!< Window mode enabled: non inverting input of comparator 2 is connected to the non inverting input of comparator 1 (PA1) */ #define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED)) #define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */ /** * @} */ #else /** @defgroup COMPEx_WindowMode COMPEx_WindowMode (Other Product devices) * @{ */ #define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled (not available) */ #define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */ #define COMP_CSR_COMPxWNDWEN_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */ /** * @} */ #endif /* STM32F302xC || STM32F303xC || STM32F358xx */ /** @defgroup COMPEx_Mode * @{ */ #if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ defined(STM32F373xC) || defined(STM32F378xx) /* Please refer to the electrical characteristics in the device datasheet for the power consumption values */ #define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */ #define COMP_MODE_MEDIUMSPEED COMP_CSR_COMPxMODE_0 /*!< Medium Speed */ #define COMP_MODE_LOWPOWER COMP_CSR_COMPxMODE_1 /*!< Low power mode */ #define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMPxMODE /*!< Ultra-low power mode */ #define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \ ((MODE) == COMP_MODE_MEDIUMSPEED) || \ ((MODE) == COMP_MODE_LOWPOWER) || \ ((MODE) == COMP_MODE_ULTRALOWPOWER)) #define COMP_CSR_COMPxMODE_MASK COMP_CSR_COMPxMODE /*!< COMP_CSR_COMPxMODE Mask */ #else /*!< Power mode not available */ #define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */ #define COMP_CSR_COMPxMODE_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */ #endif /* STM32F302xC || STM32F303xC || STM32F358xx || */ /* STM32F373xC || STM32F378xx */ /** * @} */ /** @defgroup COMPEx_Hysteresis * @{ */ #if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ defined(STM32F373xC) || defined(STM32F378xx) #define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */ #define COMP_HYSTERESIS_LOW COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */ #define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */ #define COMP_HYSTERESIS_HIGH COMP_CSR_COMPxHYST /*!< Hysteresis level high */ #define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH)) #define COMP_CSR_COMPxHYST_MASK COMP_CSR_COMPxHYST /*!< COMP_CSR_COMPxHYST Mask */ #else #define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */ #define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */ #define COMP_CSR_COMPxHYST_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */ #endif /* STM32F302xC || STM32F303xC || STM32F358xx || */ /* STM32F373xC || STM32F378xx */ /** * @} */ #if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) /** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices) * @{ */ /* No blanking source can be selected for all comparators */ #define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */ /* Blanking source for COMP2 */ #define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for compartor */ /* Blanking source for COMP4 */ #define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */ /* Blanking source for COMP6 */ #define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */ #define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2)) /* STM32F301x6/x8, STM32F302x6/x8, STM32F303x6/x8, STM32F334x4/6/8, STM32F318xx/STM32F328xx devices comparator instances blanking source values */ #define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \ ((((INSTANCE) == COMP2) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \ || \ (((INSTANCE) == COMP4) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \ || \ (((INSTANCE) == COMP6) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2)))) #define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */ /** * @} */ /** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices) * Elements values convention: XXXXZYYY * - XXXX : Interrupt mask in the register list where Z equal 0x0 * - YYY : Interrupt mask in the register list where Z equal 0x1 * - Z : register index(4bits) * - 0x0: EMR/IMR/RTSR/FTSR register * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register * @{ */ #define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */ #define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */ #define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */ #define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */ #define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */ /** * @} */ #endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */ /* STM32F303x8 || STM32F334x8 || STM32F328xx */ #if defined(STM32F302xC) /** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F302xC Product devices) * @{ */ /* No blanking source can be selected for all comparators */ #define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */ /* Blanking source common for COMP1 and COMP2 */ #define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */ /* Blanking source common for COMP1 and COMP2 */ #define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */ /* Blanking source common for COMP1 and COMP2 */ #define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for compartor */ /* Blanking source for COMP4 */ #define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */ /* Blanking source for COMP6 */ #define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */ #define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2)) /* STM32F302xB/STM32F302xC devices comparator instances blanking source values */ #define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \ (((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \ || \ (((INSTANCE) == COMP4) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \ || \ (((INSTANCE) == COMP6) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2)))) #define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */ /** * @} */ /** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F302xC Product devices) * Elements values convention: XXXXZYYY * - XXXX : Interrupt mask in the register list where Z equal 0x0 * - YYY : Interrupt mask in the register list where Z equal 0x1 * - Z : register index(4bits) * - 0x0: EMR/IMR/RTSR/FTSR register * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register * @{ */ #define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */ #define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */ #define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */ #define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */ #define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */ #define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */ /** * @} */ #endif /* STM32F302xC */ #if defined(STM32F303xC) || defined(STM32F358xx) /** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F303xC/STM32F358xx Product devices) * @{ */ /* No blanking source can be selected for all comparators */ #define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */ /* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */ #define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */ /* Blanking source common for COMP1 and COMP2 */ #define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for compartor */ /* Blanking source common for COMP1, COMP2 and COMP5 */ #define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC3 selected as blanking source for compartor */ /* Blanking source common for COMP3 and COMP6 */ #define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */ /* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */ #define COMP_BLANKINGSRCE_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for compartor */ /* Blanking source for COMP4 */ #define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */ #define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */ /* Blanking source common for COMP6 and COMP7 */ #define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */ #define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM8OC5) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2)) /* STM32F303xB/STM32F303xC/STM32F358xx devices comparator instances blanking source values */ #define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \ (((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \ || \ (((INSTANCE) == COMP3) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4))) \ || \ (((INSTANCE) == COMP4) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \ || \ (((INSTANCE) == COMP5) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \ || \ (((INSTANCE) == COMP6) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))) \ || \ (((INSTANCE) == COMP7) && \ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2)))) #define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */ /** * @} */ /** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F303xC/STM32F358xx Product devices) * Elements values convention: XXXXZYYY * - XXXX : Interrupt mask in the register list where Z equal 0x0 * - YYY : Interrupt mask in the register list where Z equal 0x1 * - Z : register index(4bits) * - 0x0: EMR/IMR/RTSR/FTSR register * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register * @{ */ #define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */ #define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */ #define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */ #define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */ #define COMP_EXTI_LINE_COMP3_EVENT ((uint32_t)0x20000000) /*!< External interrupt line 29 Connected to COMP3 */ #define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */ #define COMP_EXTI_LINE_COMP5_EVENT ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to COMP5 */ #define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */ #define COMP_EXTI_LINE_COMP7_EVENT ((uint32_t)0x00001002) /*!< External interrupt line 33 Connected to COMP7 */ /** * @} */ #endif /* STM32F303xC || STM32F358xx */ #if defined(STM32F373xC) ||defined(STM32F378xx) /** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F373xC/STM32F378xx Product devices) * @{ */ /* No blanking source can be selected for all comparators */ #define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */ #define IS_COMP_BLANKINGSRCE(SOURCE) ((SOURCE) == (SOURCE)) /*!< Not available: check always true */ /* STM32F373xB/STM32F373xC/STM32F378xx devices comparator instances blanking source values */ #define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \ ((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE)) #define COMP_CSR_COMPxBLANKING_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */ /** * @} */ /** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F373xC/STM32F378xx Product devices) * Elements values convention: XXXX0000 * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register * @{ */ #define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */ #define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */ /** * @} */ #endif /* STM32F373xC || STM32F378xx */ #if defined(STM32F373xC) || defined(STM32F378xx) /* CSR register reset value */ #define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000) #define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF) #define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE) /* CSR COMP1/COMP2 shift */ #define COMP_CSR_COMP1_SHIFT 0U #define COMP_CSR_COMP2_SHIFT 16U #else /* CSR register reset value */ #define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000) #endif /* STM32F373xC || STM32F378xx */ /* CSR masks redefinition for internal use */ #define COMP_CSR_COMPxINSEL_MASK COMP_CSR_COMPxINSEL /*!< COMP_CSR_COMPxINSEL Mask */ #define COMP_CSR_COMPxOUTSEL_MASK COMP_CSR_COMPxOUTSEL /*!< COMP_CSR_COMPxOUTSEL Mask */ #define COMP_CSR_COMPxPOL_MASK COMP_CSR_COMPxPOL /*!< COMP_CSR_COMPxPOL Mask */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ #if defined(STM32F373xC) ||defined(STM32F378xx) /** * @brief Checks whether the specified EXTI line flag is set or not. * @param __FLAG__: specifies the COMP Exti sources to be checked. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval The state of __FLAG__ (SET or RESET). */ #define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__)) /** * @brief Clear the COMP Exti flags. * @param __FLAG__: specifies the COMP Exti sources to be cleared. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__)) /** * @brief Enable the COMP Exti Line. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__)) /** * @brief Disable the COMP Exti Line. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__)) /** * @brief Enable the Exti Line rising edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__)) /** * @brief Disable the Exti Line rising edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__)) /** * @brief Enable the Exti Line falling edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__)) /** * @brief Disable the Exti Line falling edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__)) /** * @brief Init a comparator instance * @param __HANDLE__: specifies the COMP handle * @note The common output selection is checked versus the COMP instance to set the right output configuration * @retval None. */ #define COMP_OUTPUT_COMP2_TIM2IC4 ((uint32_t)0x0400) /*!< COMP2 output connected to TIM2 Input Capture 4 */ #define COMP_OUTPUT_COMP2_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP2 output connected to TIM4 OCREF Clear */ #define COMP_OUTPUT_COMP2_TIM3IC1 ((uint32_t)0x0600) /*!< COMP2 output connected to TIM3 Input Capture 1 */ #define COMP_OUTPUT_COMP2_TIM3OCREFCLR ((uint32_t)0x0700) /*!< COMP2 output connected to TIM3 OCREF Clear */ #define COMP_INIT(__HANDLE__) \ do { \ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \ uint32_t compoutput = (__HANDLE__)->Init.Output; \ \ if((__HANDLE__)->Instance == COMP2) \ { \ regshift = COMP_CSR_COMP2_SHIFT; \ switch((__HANDLE__)->Init.Output) \ { \ case COMP_OUTPUT_TIM2IC4: \ compoutput = COMP_OUTPUT_COMP2_TIM2IC4; \ break; \ case COMP_OUTPUT_TIM2OCREFCLR: \ compoutput = COMP_OUTPUT_COMP2_TIM2OCREFCLR; \ break; \ case COMP_OUTPUT_TIM3IC1: \ compoutput = COMP_OUTPUT_COMP2_TIM3IC1; \ break; \ case COMP_OUTPUT_TIM3OCREFCLR: \ compoutput = COMP_OUTPUT_COMP2_TIM3OCREFCLR; \ break; \ default: \ break; \ } \ } \ \ MODIFY_REG(COMP->CSR, \ (COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \ COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \ COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, \ ((__HANDLE__)->Init.InvertingInput | \ (__HANDLE__)->Init.NonInvertingInput | \ compoutput | \ (__HANDLE__)->Init.OutputPol | \ (__HANDLE__)->Init.Hysteresis | \ (__HANDLE__)->Init.Mode) << regshift); \ \ if((__HANDLE__)->Init.WindowMode != COMP_WINDOWMODE_DISABLED) \ { \ COMP->CSR |= COMP_CSR_WNDWEN; \ } \ } while(0) /** * @brief DeInit a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_DEINIT(__HANDLE__) \ do { \ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \ \ if((__HANDLE__)->Instance == COMP2) \ { \ regshift = COMP_CSR_COMP2_SHIFT; \ } \ MODIFY_REG(COMP->CSR, \ COMP_CSR_RESET_PARAMETERS_MASK << regshift, \ COMP_CSR_RESET_VALUE << regshift); \ } while(0) /** * @brief Start a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_START(__HANDLE__) \ do { \ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \ \ if((__HANDLE__)->Instance == COMP2) \ { \ regshift = COMP_CSR_COMP2_SHIFT; \ } \ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \ } while(0) /** * @brief Stop a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_STOP(__HANDLE__) \ do { \ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \ \ if((__HANDLE__)->Instance == COMP2) \ { \ regshift = COMP_CSR_COMP2_SHIFT; \ } \ CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \ } while(0) /** * @brief Lock a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_LOCK(__HANDLE__) \ do { \ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \ \ if((__HANDLE__)->Instance == COMP2) \ { \ regshift = COMP_CSR_COMP2_SHIFT; \ } \ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); \ } while(0) #else /** * @brief Checks whether the specified EXTI line flag is set or not. * @param __EXTILINE__: specifies the COMP Exti sources to be checked. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval The state of __FLAG__ (SET or RESET). */ #define __HAL_COMP_EXTI_GET_FLAG(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 & (__EXTILINE__)) : (EXTI->PR & (__EXTILINE__))) /** * @brief Clear the COMP Exti flags. * @param __EXTILINE__: specifies the COMP Exti sources to be cleared. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_CLEAR_FLAG(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 = (__EXTILINE__)) : (EXTI->PR = (__EXTILINE__))) /** * @brief Enable the COMP Exti Line. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 |= (__EXTILINE__)) : (EXTI->IMR |= (__EXTILINE__))) /** * @brief Disable the COMP Exti Line. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 &= ~(__EXTILINE__)) : (EXTI->IMR &= ~(__EXTILINE__))) /** * @brief Enable the Exti Line rising edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 |= (__EXTILINE__)) : (EXTI->RTSR |= (__EXTILINE__))) /** * @brief Disable the Exti Line rising edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 &= ~(__EXTILINE__)) : (EXTI->RTSR &= ~(__EXTILINE__))) /** * @brief Enable the Exti Line falling edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 |= (__EXTILINE__)) : (EXTI->FTSR |= (__EXTILINE__))) /** * @brief Disable the Exti Line falling edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMPEx_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) \ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 &= ~(__EXTILINE__)) : (EXTI->FTSR &= ~(__EXTILINE__))) /** * @brief Init a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_INIT(__HANDLE__) \ do { \ __IO uint32_t csrreg = 0; \ \ csrreg = READ_REG((__HANDLE__)->Instance->CSR); \ MODIFY_REG(csrreg, COMP_CSR_COMPxINSEL_MASK, (__HANDLE__)->Init.InvertingInput); \ MODIFY_REG(csrreg, COMP_CSR_COMPxNONINSEL_MASK, (__HANDLE__)->Init.NonInvertingInput); \ MODIFY_REG(csrreg, COMP_CSR_COMPxBLANKING_MASK, (__HANDLE__)->Init.BlankingSrce); \ MODIFY_REG(csrreg, COMP_CSR_COMPxOUTSEL_MASK, (__HANDLE__)->Init.Output); \ MODIFY_REG(csrreg, COMP_CSR_COMPxPOL_MASK, (__HANDLE__)->Init.OutputPol); \ MODIFY_REG(csrreg, COMP_CSR_COMPxHYST_MASK, (__HANDLE__)->Init.Hysteresis); \ MODIFY_REG(csrreg, COMP_CSR_COMPxMODE_MASK, (__HANDLE__)->Init.Mode); \ MODIFY_REG(csrreg, COMP_CSR_COMPxWNDWEN_MASK, (__HANDLE__)->Init.WindowMode); \ WRITE_REG((__HANDLE__)->Instance->CSR, csrreg); \ } while(0) /** * @brief DeInit a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_DEINIT(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->CSR, COMP_CSR_RESET_VALUE) /** * @brief Start a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_START(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN) /** * @brief Stop a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_STOP(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN) /** * @brief Lock a comparator instance * @param __HANDLE__: specifies the COMP handle * @retval None. */ #define COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxLOCK) #endif /* STM32F373xC || STM32F378xx */ #if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) /** * @brief Get the specified EXTI line for a comparator instance * @param __INSTANCE__: specifies the COMP instance. * @retval value of @ref COMPEx_ExtiLineEvent */ #define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \ COMP_EXTI_LINE_COMP6_EVENT) #endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */ /* STM32F303x8 || STM32F334x8 || STM32F328xx */ #if defined(STM32F302xC) /** * @brief Get the specified EXTI line for a comparator instance * @param __INSTANCE__: specifies the COMP instance. * @retval value of @ref COMPEx_ExtiLineEvent */ #define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \ ((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \ COMP_EXTI_LINE_COMP6_EVENT) #endif /* STM32F302xC */ #if defined(STM32F303xC) || defined(STM32F358xx) /** * @brief Get the specified EXTI line for a comparator instance * @param __INSTANCE__: specifies the COMP instance. * @retval value of @ref COMPEx_ExtiLineEvent */ #define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \ ((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \ ((__INSTANCE__) == COMP3) ? COMP_EXTI_LINE_COMP3_EVENT : \ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \ ((__INSTANCE__) == COMP5) ? COMP_EXTI_LINE_COMP5_EVENT : \ ((__INSTANCE__) == COMP6) ? COMP_EXTI_LINE_COMP6_EVENT : \ COMP_EXTI_LINE_COMP7_EVENT) #endif /* STM32F303xC || STM32F358xx */ #if defined(STM32F373xC) ||defined(STM32F378xx) /** * @brief Get the specified EXTI line for a comparator instance * @param __INSTANCE__: specifies the COMP instance. * @retval value of @ref COMPEx_ExtiLineEvent */ #define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \ COMP_EXTI_LINE_COMP2_EVENT) #endif /* STM32F373xC || STM32F378xx */ /* Exported functions --------------------------------------------------------*/ /* Initialization and de-initialization functions ****************************/ /* IO operation functions *****************************************************/ /* Peripheral Control functions ***********************************************/ /* Peripheral State and Error functions ***************************************/ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F3xx_HAL_COMP_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/