mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_L053R8/stm32l0xx_hal_dac_ex.c
- Committer:
- mbed_official
- Date:
- 2014-05-07
- Revision:
- 181:a4cbdfbbd2f4
File content as of revision 181:a4cbdfbbd2f4:
/** ****************************************************************************** * @file stm32l0xx_hal_dac_ex.c * @author MCD Application Team * @version V1.0.0 * @date 22-April-2014 * @brief DAC HAL module driver. * * This file provides firmware functions to manage the following * functionalities of the Digital to Analog Converter (DAC) peripheral: * + DAC wave generation * @verbatim @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32l0xx_hal.h" /** @addtogroup STM32L0xx_HAL_Driver * @{ */ /** @defgroup DACEx * @brief DAC driver modules * @{ */ #ifdef HAL_DAC_MODULE_ENABLED #if !defined (STM32L051xx) && !defined (STM32L061xx) /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @defgroup DACEx_Private_Functions * @{ */ /** @defgroup DACEx_Group Peripheral Control functions * @brief Peripheral Control functions * @verbatim ============================================================================== ##### Peripheral Control functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Configure Triangle wave generation. (+) Configure Noise wave generation. @endverbatim * @{ */ /** * @brief Enables or disables the selected DAC channel wave triangle generation. * @param hdac: pointer to a DAC_HandleTypeDef structure that contains * the configuration information for the specified DAC. * @param channel: The selected DAC channel. * This parameter can be one of the following values: * @arg DAC_CHANNEL_1: DAC Channel1 selected * @param Amplitude: Select max triangle amplitude. * This parameter can be one of the following values: * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 * @retval HAL status */ HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t Amplitude) { /* Check the parameters */ assert_param(IS_DAC_CHANNEL(channel)); assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); /* Process locked */ __HAL_LOCK(hdac); /* Change DAC state */ hdac->State = HAL_DAC_STATE_BUSY; /* Enable the selected wave generation for the selected DAC channel */ hdac->Instance->CR |= (DAC_WAVEGENERATION_TRIANGLE | Amplitude) << channel; /* Change DAC state */ hdac->State = HAL_DAC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hdac); /* Return function status */ return HAL_OK; } /** * @brief Enables or disables the selected DAC channel wave noise generation. * @param channel: The selected DAC channel. * This parameter can be one of the following values: * @arg DAC_CHANNEL_1: DAC Channel1 selected * @param Amplitude: Unmask DAC channel LFSR for noise wave generation. * This parameter can be one of the following values: * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation * @retval HAL status */ HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t Amplitude) { /* Check the parameters */ assert_param(IS_DAC_CHANNEL(channel)); assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); /* Process locked */ __HAL_LOCK(hdac); /* Change DAC state */ hdac->State = HAL_DAC_STATE_BUSY; /* Enable the selected wave generation for the selected DAC channel */ hdac->Instance->CR |= (DAC_WAVEGENERATION_NOISE | Amplitude) << channel; /* Change DAC state */ hdac->State = HAL_DAC_STATE_READY; /* Process unlocked */ __HAL_UNLOCK(hdac); /* Return function status */ return HAL_OK; } /** * @} */ /** * @} */ #endif /* STM32L051xx && STM32L061xx*/ #endif /* HAL_DAC_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/