mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.c
- Committer:
- mbed_official
- Date:
- 2014-01-30
- Revision:
- 80:66393a7b209d
- Parent:
- 76:aeb1df146756
- Child:
- 106:ced8cbb51063
File content as of revision 80:66393a7b209d:
/** ****************************************************************************** * @file stm32l1xx_fsmc.c * @author MCD Application Team * @version V1.3.0 * @date 31-January-2014 * @brief This file provides firmware functions to manage the following * functionalities of the FSMC peripheral: * + Initialization * + Interrupts and flags management * ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> * * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx_fsmc.h" #include "stm32l1xx_rcc.h" /** @addtogroup STM32L1xx_StdPeriph_Driver * @{ */ /** @defgroup FSMC * @brief FSMC driver modules * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @defgroup FSMC_Private_Functions * @{ */ /** @defgroup FSMC_Group1 NOR/SRAM Controller functions * @brief NOR/SRAM Controller functions * @verbatim ============================================================================== ##### NOR-SRAM Controller functions ##### ============================================================================== [..] The following sequence should be followed to configure the FSMC to interface with SRAM, PSRAM, NOR or OneNAND memory connected to the NOR/SRAM Bank: (#) Enable the clock for the FSMC and associated GPIOs using the following functions: (++)RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); (++)RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOx, ENABLE); (#) FSMC pins configuration (++) Connect the involved FSMC pins to AF12 using the following function GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FSMC); (++) Configure these FSMC pins in alternate function mode by calling the function GPIO_Init(); (#) Declare a FSMC_NORSRAMInitTypeDef structure, for example: FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure; and fill the FSMC_NORSRAMInitStructure variable with the allowed values of the structure member. (#) Initialize the NOR/SRAM Controller by calling the function FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); (#) Then enable the NOR/SRAM Bank, for example: FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM2, ENABLE); (#) At this stage you can read/write from/to the memory connected to the NOR/SRAM Bank. @endverbatim * @{ */ /** * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default * reset values. * @param FSMC_Bank: specifies the FSMC Bank to be used * This parameter can be one of the following values: * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 * @retval None */ void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) { /* Check the parameter */ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); /* FSMC_Bank1_NORSRAM1 */ if(FSMC_Bank == FSMC_Bank1_NORSRAM1) { FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; } /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ else { FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; } FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; } /** * @brief Initializes the FSMC NOR/SRAM Banks according to the specified * parameters in the FSMC_NORSRAMInitStruct. * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef * structure that contains the configuration information for * the FSMC NOR/SRAM specified Banks. * @retval None */ void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) { /* Check the parameters */ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait)); assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); /* Bank1 NOR/SRAM control register configuration */ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | FSMC_NORSRAMInitStruct->FSMC_MemoryType | FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait | FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | FSMC_NORSRAMInitStruct->FSMC_WrapMode | FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | FSMC_NORSRAMInitStruct->FSMC_WriteOperation | FSMC_NORSRAMInitStruct->FSMC_WaitSignal | FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | FSMC_NORSRAMInitStruct->FSMC_WriteBurst; if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) { FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)FSMC_BCR1_FACCEN; } /* Bank1 NOR/SRAM timing register configuration */ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) { assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; } else { FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; } } /** * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef * structure which will be initialized. * @retval None */ void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) { /* Reset NOR/SRAM Init structure parameters values */ FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; } /** * @brief Enables or disables the specified NOR/SRAM Memory Bank. * @param FSMC_Bank: specifies the FSMC Bank to be used * This parameter can be one of the following values: * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. * @retval None */ void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) { assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { /* Enable the selected NOR/SRAM Bank by setting the MBKEN bit in the BCRx register */ FSMC_Bank1->BTCR[FSMC_Bank] |= FSMC_BCR1_MBKEN; } else { /* Disable the selected NOR/SRAM Bank by clearing the MBKEN bit in the BCRx register */ FSMC_Bank1->BTCR[FSMC_Bank] &= (uint32_t)(~FSMC_BCR1_MBKEN); } } /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/