mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h
- Committer:
- mbed_official
- Date:
- 2014-03-10
- Revision:
- 113:65a335a675de
- Parent:
- 13:0645d8841f51
File content as of revision 113:65a335a675de:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 typedef enum { // LPC1347 Pin Names P0_0 = 0, P0_1 = 1, P0_2 = 2, P0_3 = 3, P0_4 = 4, P0_5 = 5, P0_6 = 6, P0_7 = 7, P0_8 = 8, P0_9 = 9, P0_10 = 10, P0_11 = 11, P0_12 = 12, P0_13 = 13, P0_14 = 14, P0_15 = 15, P0_16 = 16, P0_17 = 17, P0_18 = 18, P0_19 = 19, P0_20 = 20, P0_21 = 21, P0_22 = 22, P0_23 = 23, P1_13 = 45, P1_14 = 46, P1_15 = 47, P1_16 = 48, P1_19 = 51, P1_20 = 52, P1_21 = 53, P1_22 = 54, P1_23 = 55, P1_24 = 56, P1_25 = 57, P1_26 = 58, P1_27 = 59, P1_28 = 60, P1_29 = 61, P1_31 = 63, // DIP Pin Names p1 = P0_0, p2 = P0_11, p3 = P0_12, p4 = P0_13, p5 = P0_14, p6 = P1_31, p8 = P0_16, p9 = P0_22, p10 = P0_23, p13 = P1_29, p14 = P1_21, p15 = P0_8, p16 = P0_9, p17 = P1_24, p18 = P0_4, p19 = P1_13, p20 = P1_14, p21 = P1_22, p22 = P0_17, p23 = P0_5, p24 = P0_21, p25 = P0_19, p26 = P0_18, p27 = P1_15, p28 = P1_16, p29 = P1_25, p30 = P1_19, p33 = P0_20, p34 = P0_2, p35 = P1_26, p36 = P1_27, p37 = P1_20, p38 = P1_23, p39 = P0_7, p40 = P1_28, UART_TX = P0_19, UART_RX = P0_18, // Not connected NC = (int)0xFFFFFFFF, LED1 = p21, LED2 = p21, LED3 = p21, LED4 = p21 } PinName; typedef enum { CHANNEL0 = PIN_INT0_IRQn, CHANNEL1 = PIN_INT1_IRQn, CHANNEL2 = PIN_INT2_IRQn, CHANNEL3 = PIN_INT3_IRQn, CHANNEL4 = PIN_INT4_IRQn, CHANNEL5 = PIN_INT5_IRQn, CHANNEL6 = PIN_INT6_IRQn, CHANNEL7 = PIN_INT7_IRQn } Channel; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif