mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC408X/ethernet_api.c
- Committer:
- janekm
- Date:
- 2014-09-16
- Revision:
- 310:6188e0254baa
- Parent:
- 286:31249416b6f9
File content as of revision 310:6188e0254baa:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include <string.h> #include "ethernet_api.h" #include "cmsis.h" #include "mbed_interface.h" #include "toolchain.h" #include "mbed_error.h" #define NEW_LOGIC 0 #define NEW_ETH_BUFFER 0 #if NEW_ETH_BUFFER #define NUM_RX_FRAG 4 // Number of Rx Fragments (== packets) #define NUM_TX_FRAG 3 // Number of Tx Fragments (== packets) #define ETH_MAX_FLEN 1536 // Maximum Ethernet Frame Size #define ETH_FRAG_SIZE ETH_MAX_FLEN // Packet Fragment size (same as packet length) #else // Memfree calculation: // (16 * 1024) - ((2 * 4 * NUM_RX) + (2 * 4 * NUM_RX) + (0x300 * NUM_RX) + // (2 * 4 * NUM_TX) + (1 * 4 * NUM_TX) + (0x300 * NUM_TX)) = 8556 /* EMAC Memory Buffer configuration for 16K Ethernet RAM. */ #define NUM_RX_FRAG 4 /* Num.of RX Fragments 4*1536= 6.0kB */ #define NUM_TX_FRAG 3 /* Num.of TX Fragments 3*1536= 4.6kB */ //#define ETH_FRAG_SIZE 1536 /* Packet Fragment size 1536 Bytes */ //#define ETH_MAX_FLEN 1536 /* Max. Ethernet Frame Size */ #define ETH_FRAG_SIZE 0x300 /* Packet Fragment size 1536/2 Bytes */ #define ETH_MAX_FLEN 0x300 /* Max. Ethernet Frame Size */ const int ethernet_MTU_SIZE = 0x300; #endif #define ETHERNET_ADDR_SIZE 6 PACKED struct RX_DESC_TypeDef { /* RX Descriptor struct */ unsigned int Packet; unsigned int Ctrl; }; typedef struct RX_DESC_TypeDef RX_DESC_TypeDef; PACKED struct RX_STAT_TypeDef { /* RX Status struct */ unsigned int Info; unsigned int HashCRC; }; typedef struct RX_STAT_TypeDef RX_STAT_TypeDef; PACKED struct TX_DESC_TypeDef { /* TX Descriptor struct */ unsigned int Packet; unsigned int Ctrl; }; typedef struct TX_DESC_TypeDef TX_DESC_TypeDef; PACKED struct TX_STAT_TypeDef { /* TX Status struct */ unsigned int Info; }; typedef struct TX_STAT_TypeDef TX_STAT_TypeDef; /* MAC Configuration Register 1 */ #define MAC1_REC_EN 0x00000001 /* Receive Enable */ #define MAC1_PASS_ALL 0x00000002 /* Pass All Receive Frames */ #define MAC1_RX_FLOWC 0x00000004 /* RX Flow Control */ #define MAC1_TX_FLOWC 0x00000008 /* TX Flow Control */ #define MAC1_LOOPB 0x00000010 /* Loop Back Mode */ #define MAC1_RES_TX 0x00000100 /* Reset TX Logic */ #define MAC1_RES_MCS_TX 0x00000200 /* Reset MAC TX Control Sublayer */ #define MAC1_RES_RX 0x00000400 /* Reset RX Logic */ #define MAC1_RES_MCS_RX 0x00000800 /* Reset MAC RX Control Sublayer */ #define MAC1_SIM_RES 0x00004000 /* Simulation Reset */ #define MAC1_SOFT_RES 0x00008000 /* Soft Reset MAC */ /* MAC Configuration Register 2 */ #define MAC2_FULL_DUP 0x00000001 /* Full Duplex Mode */ #define MAC2_FRM_LEN_CHK 0x00000002 /* Frame Length Checking */ #define MAC2_HUGE_FRM_EN 0x00000004 /* Huge Frame Enable */ #define MAC2_DLY_CRC 0x00000008 /* Delayed CRC Mode */ #define MAC2_CRC_EN 0x00000010 /* Append CRC to every Frame */ #define MAC2_PAD_EN 0x00000020 /* Pad all Short Frames */ #define MAC2_VLAN_PAD_EN 0x00000040 /* VLAN Pad Enable */ #define MAC2_ADET_PAD_EN 0x00000080 /* Auto Detect Pad Enable */ #define MAC2_PPREAM_ENF 0x00000100 /* Pure Preamble Enforcement */ #define MAC2_LPREAM_ENF 0x00000200 /* Long Preamble Enforcement */ #define MAC2_NO_BACKOFF 0x00001000 /* No Backoff Algorithm */ #define MAC2_BACK_PRESSURE 0x00002000 /* Backoff Presurre / No Backoff */ #define MAC2_EXCESS_DEF 0x00004000 /* Excess Defer */ /* Back-to-Back Inter-Packet-Gap Register */ #define IPGT_FULL_DUP 0x00000015 /* Recommended value for Full Duplex */ #define IPGT_HALF_DUP 0x00000012 /* Recommended value for Half Duplex */ /* Non Back-to-Back Inter-Packet-Gap Register */ #define IPGR_DEF 0x00000012 /* Recommended value */ /* Collision Window/Retry Register */ #define CLRT_DEF 0x0000370F /* Default value */ /* PHY Support Register */ #define SUPP_SPEED 0x00000100 /* Reduced MII Logic Current Speed */ //#define SUPP_RES_RMII 0x00000800 /* Reset Reduced MII Logic */ #define SUPP_RES_RMII 0x00000000 /* Reset Reduced MII Logic */ /* Test Register */ #define TEST_SHCUT_PQUANTA 0x00000001 /* Shortcut Pause Quanta */ #define TEST_TST_PAUSE 0x00000002 /* Test Pause */ #define TEST_TST_BACKP 0x00000004 /* Test Back Pressure */ /* MII Management Configuration Register */ #define MCFG_SCAN_INC 0x00000001 /* Scan Increment PHY Address */ #define MCFG_SUPP_PREAM 0x00000002 /* Suppress Preamble */ #define MCFG_CLK_SEL 0x0000003C /* Clock Select Mask */ #define MCFG_RES_MII 0x00008000 /* Reset MII Management Hardware */ /* MII Management Command Register */ #define MCMD_READ 0x00000001 /* MII Read */ #define MCMD_SCAN 0x00000002 /* MII Scan continuously */ #define MII_WR_TOUT 0x00050000 /* MII Write timeout count */ #define MII_RD_TOUT 0x00050000 /* MII Read timeout count */ /* MII Management Address Register */ #define MADR_REG_ADR 0x0000001F /* MII Register Address Mask */ #define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */ /* MII Management Indicators Register */ #define MIND_BUSY 0x00000001 /* MII is Busy */ #define MIND_SCAN 0x00000002 /* MII Scanning in Progress */ #define MIND_NOT_VAL 0x00000004 /* MII Read Data not valid */ #define MIND_MII_LINK_FAIL 0x00000008 /* MII Link Failed */ /* Command Register */ #define CR_RX_EN 0x00000001 /* Enable Receive */ #define CR_TX_EN 0x00000002 /* Enable Transmit */ #define CR_REG_RES 0x00000008 /* Reset Host Registers */ #define CR_TX_RES 0x00000010 /* Reset Transmit Datapath */ #define CR_RX_RES 0x00000020 /* Reset Receive Datapath */ #define CR_PASS_RUNT_FRM 0x00000040 /* Pass Runt Frames */ #define CR_PASS_RX_FILT 0x00000080 /* Pass RX Filter */ #define CR_TX_FLOW_CTRL 0x00000100 /* TX Flow Control */ #define CR_RMII 0x00000200 /* Reduced MII Interface */ #define CR_FULL_DUP 0x00000400 /* Full Duplex */ /* Status Register */ #define SR_RX_EN 0x00000001 /* Enable Receive */ #define SR_TX_EN 0x00000002 /* Enable Transmit */ /* Transmit Status Vector 0 Register */ #define TSV0_CRC_ERR 0x00000001 /* CRC error */ #define TSV0_LEN_CHKERR 0x00000002 /* Length Check Error */ #define TSV0_LEN_OUTRNG 0x00000004 /* Length Out of Range */ #define TSV0_DONE 0x00000008 /* Tramsmission Completed */ #define TSV0_MCAST 0x00000010 /* Multicast Destination */ #define TSV0_BCAST 0x00000020 /* Broadcast Destination */ #define TSV0_PKT_DEFER 0x00000040 /* Packet Deferred */ #define TSV0_EXC_DEFER 0x00000080 /* Excessive Packet Deferral */ #define TSV0_EXC_COLL 0x00000100 /* Excessive Collision */ #define TSV0_LATE_COLL 0x00000200 /* Late Collision Occured */ #define TSV0_GIANT 0x00000400 /* Giant Frame */ #define TSV0_UNDERRUN 0x00000800 /* Buffer Underrun */ #define TSV0_BYTES 0x0FFFF000 /* Total Bytes Transferred */ #define TSV0_CTRL_FRAME 0x10000000 /* Control Frame */ #define TSV0_PAUSE 0x20000000 /* Pause Frame */ #define TSV0_BACK_PRESS 0x40000000 /* Backpressure Method Applied */ #define TSV0_VLAN 0x80000000 /* VLAN Frame */ /* Transmit Status Vector 1 Register */ #define TSV1_BYTE_CNT 0x0000FFFF /* Transmit Byte Count */ #define TSV1_COLL_CNT 0x000F0000 /* Transmit Collision Count */ /* Receive Status Vector Register */ #define RSV_BYTE_CNT 0x0000FFFF /* Receive Byte Count */ #define RSV_PKT_IGNORED 0x00010000 /* Packet Previously Ignored */ #define RSV_RXDV_SEEN 0x00020000 /* RXDV Event Previously Seen */ #define RSV_CARR_SEEN 0x00040000 /* Carrier Event Previously Seen */ #define RSV_REC_CODEV 0x00080000 /* Receive Code Violation */ #define RSV_CRC_ERR 0x00100000 /* CRC Error */ #define RSV_LEN_CHKERR 0x00200000 /* Length Check Error */ #define RSV_LEN_OUTRNG 0x00400000 /* Length Out of Range */ #define RSV_REC_OK 0x00800000 /* Frame Received OK */ #define RSV_MCAST 0x01000000 /* Multicast Frame */ #define RSV_BCAST 0x02000000 /* Broadcast Frame */ #define RSV_DRIB_NIBB 0x04000000 /* Dribble Nibble */ #define RSV_CTRL_FRAME 0x08000000 /* Control Frame */ #define RSV_PAUSE 0x10000000 /* Pause Frame */ #define RSV_UNSUPP_OPC 0x20000000 /* Unsupported Opcode */ #define RSV_VLAN 0x40000000 /* VLAN Frame */ /* Flow Control Counter Register */ #define FCC_MIRR_CNT 0x0000FFFF /* Mirror Counter */ #define FCC_PAUSE_TIM 0xFFFF0000 /* Pause Timer */ /* Flow Control Status Register */ #define FCS_MIRR_CNT 0x0000FFFF /* Mirror Counter Current */ /* Receive Filter Control Register */ #define RFC_UCAST_EN 0x00000001 /* Accept Unicast Frames Enable */ #define RFC_BCAST_EN 0x00000002 /* Accept Broadcast Frames Enable */ #define RFC_MCAST_EN 0x00000004 /* Accept Multicast Frames Enable */ #define RFC_UCAST_HASH_EN 0x00000008 /* Accept Unicast Hash Filter Frames */ #define RFC_MCAST_HASH_EN 0x00000010 /* Accept Multicast Hash Filter Fram.*/ #define RFC_PERFECT_EN 0x00000020 /* Accept Perfect Match Enable */ #define RFC_MAGP_WOL_EN 0x00001000 /* Magic Packet Filter WoL Enable */ #define RFC_PFILT_WOL_EN 0x00002000 /* Perfect Filter WoL Enable */ /* Receive Filter WoL Status/Clear Registers */ #define WOL_UCAST 0x00000001 /* Unicast Frame caused WoL */ #define WOL_BCAST 0x00000002 /* Broadcast Frame caused WoL */ #define WOL_MCAST 0x00000004 /* Multicast Frame caused WoL */ #define WOL_UCAST_HASH 0x00000008 /* Unicast Hash Filter Frame WoL */ #define WOL_MCAST_HASH 0x00000010 /* Multicast Hash Filter Frame WoL */ #define WOL_PERFECT 0x00000020 /* Perfect Filter WoL */ #define WOL_RX_FILTER 0x00000080 /* RX Filter caused WoL */ #define WOL_MAG_PACKET 0x00000100 /* Magic Packet Filter caused WoL */ /* Interrupt Status/Enable/Clear/Set Registers */ #define INT_RX_OVERRUN 0x00000001 /* Overrun Error in RX Queue */ #define INT_RX_ERR 0x00000002 /* Receive Error */ #define INT_RX_FIN 0x00000004 /* RX Finished Process Descriptors */ #define INT_RX_DONE 0x00000008 /* Receive Done */ #define INT_TX_UNDERRUN 0x00000010 /* Transmit Underrun */ #define INT_TX_ERR 0x00000020 /* Transmit Error */ #define INT_TX_FIN 0x00000040 /* TX Finished Process Descriptors */ #define INT_TX_DONE 0x00000080 /* Transmit Done */ #define INT_SOFT_INT 0x00001000 /* Software Triggered Interrupt */ #define INT_WAKEUP 0x00002000 /* Wakeup Event Interrupt */ /* Power Down Register */ #define PD_POWER_DOWN 0x80000000 /* Power Down MAC */ /* RX Descriptor Control Word */ #define RCTRL_SIZE 0x000007FF /* Buffer size mask */ #define RCTRL_INT 0x80000000 /* Generate RxDone Interrupt */ /* RX Status Hash CRC Word */ #define RHASH_SA 0x000001FF /* Hash CRC for Source Address */ #define RHASH_DA 0x001FF000 /* Hash CRC for Destination Address */ /* RX Status Information Word */ #define RINFO_SIZE 0x000007FF /* Data size in bytes */ #define RINFO_CTRL_FRAME 0x00040000 /* Control Frame */ #define RINFO_VLAN 0x00080000 /* VLAN Frame */ #define RINFO_FAIL_FILT 0x00100000 /* RX Filter Failed */ #define RINFO_MCAST 0x00200000 /* Multicast Frame */ #define RINFO_BCAST 0x00400000 /* Broadcast Frame */ #define RINFO_CRC_ERR 0x00800000 /* CRC Error in Frame */ #define RINFO_SYM_ERR 0x01000000 /* Symbol Error from PHY */ #define RINFO_LEN_ERR 0x02000000 /* Length Error */ #define RINFO_RANGE_ERR 0x04000000 /* Range Error (exceeded max. size) */ #define RINFO_ALIGN_ERR 0x08000000 /* Alignment Error */ #define RINFO_OVERRUN 0x10000000 /* Receive overrun */ #define RINFO_NO_DESCR 0x20000000 /* No new Descriptor available */ #define RINFO_LAST_FLAG 0x40000000 /* Last Fragment in Frame */ #define RINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */ //#define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_CRC_ERR | RINFO_SYM_ERR | RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN) #define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_SYM_ERR | \ RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN) /* TX Descriptor Control Word */ #define TCTRL_SIZE 0x000007FF /* Size of data buffer in bytes */ #define TCTRL_OVERRIDE 0x04000000 /* Override Default MAC Registers */ #define TCTRL_HUGE 0x08000000 /* Enable Huge Frame */ #define TCTRL_PAD 0x10000000 /* Pad short Frames to 64 bytes */ #define TCTRL_CRC 0x20000000 /* Append a hardware CRC to Frame */ #define TCTRL_LAST 0x40000000 /* Last Descriptor for TX Frame */ #define TCTRL_INT 0x80000000 /* Generate TxDone Interrupt */ /* TX Status Information Word */ #define TINFO_COL_CNT 0x01E00000 /* Collision Count */ #define TINFO_DEFER 0x02000000 /* Packet Deferred (not an error) */ #define TINFO_EXCESS_DEF 0x04000000 /* Excessive Deferral */ #define TINFO_EXCESS_COL 0x08000000 /* Excessive Collision */ #define TINFO_LATE_COL 0x10000000 /* Late Collision Occured */ #define TINFO_UNDERRUN 0x20000000 /* Transmit Underrun */ #define TINFO_NO_DESCR 0x40000000 /* No new Descriptor available */ #define TINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */ /* ENET Device Revision ID */ #define OLD_EMAC_MODULE_ID 0x39022000 /* Rev. ID for first rev '-' */ /* DP83848C PHY Registers */ #define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */ #define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */ #define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */ #define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */ #define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */ #define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */ #define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */ #define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */ /* PHY Extended Registers */ #define PHY_REG_STS 0x10 /* Status Register */ #define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */ #define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */ #define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */ #define PHY_REG_RECR 0x15 /* Receive Error Counter */ #define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */ #define PHY_REG_RBR 0x17 /* RMII and Bypass Register */ #define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */ #define PHY_REG_PHYCR 0x19 /* PHY Control Register */ #define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */ #define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */ #define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */ #define PHY_REG_SCSR 0x1F /* PHY Special Control/Status Register */ #define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */ #define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */ #define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */ #define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */ #define PHY_AUTO_NEG 0x3000 /* Select Auto Negotiation */ #define DP83848C_DEF_ADR 0x0100 /* Default PHY device address */ #define DP83848C_ID 0x20005C90 /* PHY Identifier - DP83848C */ #define LAN8720_ID 0x0007C0F0 /* PHY Identifier - LAN8720 */ #define PHY_STS_LINK 0x0001 /* PHY Status Link Mask */ #define PHY_STS_SPEED 0x0002 /* PHY Status Speed Mask */ #define PHY_STS_DUPLEX 0x0004 /* PHY Status Duplex Mask */ #define PHY_BMCR_RESET 0x8000 /* PHY Reset */ #define PHY_BMSR_LINK 0x0004 /* PHY BMSR Link valid */ #define PHY_SCSR_100MBIT 0x0008 /* Speed: 1=100 MBit, 0=10Mbit */ #define PHY_SCSR_DUPLEX 0x0010 /* PHY Duplex Mask */ static int phy_read(unsigned int PhyReg); static int phy_write(unsigned int PhyReg, unsigned short Data); static void txdscr_init(void); static void rxdscr_init(void); #if defined (__ICCARM__) # define AHBSRAM1 #elif defined(TOOLCHAIN_GCC_CR) # define AHBSRAM1 __attribute__((section(".data.$RamPeriph32"))) #else # define AHBSRAM1 __attribute__((section("AHBSRAM1"),aligned)) #endif AHBSRAM1 volatile uint8_t rxbuf[NUM_RX_FRAG][ETH_FRAG_SIZE]; AHBSRAM1 volatile uint8_t txbuf[NUM_TX_FRAG][ETH_FRAG_SIZE]; AHBSRAM1 volatile RX_DESC_TypeDef rxdesc[NUM_RX_FRAG]; AHBSRAM1 volatile RX_STAT_TypeDef rxstat[NUM_RX_FRAG]; AHBSRAM1 volatile TX_DESC_TypeDef txdesc[NUM_TX_FRAG]; AHBSRAM1 volatile TX_STAT_TypeDef txstat[NUM_TX_FRAG]; #if NEW_LOGIC static int rx_consume_offset = -1; static int tx_produce_offset = -1; #else static int send_doff = 0; static int send_idx = -1; static int send_size = 0; static int receive_soff = 0; static int receive_idx = -1; #endif static uint32_t phy_id = 0; static inline int rinc(int idx, int mod) { ++idx; idx %= mod; return idx; } //extern unsigned int SystemFrequency; static inline unsigned int clockselect() { if(SystemCoreClock < 10000000) { return 1; } else if(SystemCoreClock < 15000000) { return 2; } else if(SystemCoreClock < 20000000) { return 3; } else if(SystemCoreClock < 25000000) { return 4; } else if(SystemCoreClock < 35000000) { return 5; } else if(SystemCoreClock < 50000000) { return 6; } else if(SystemCoreClock < 70000000) { return 7; } else if(SystemCoreClock < 80000000) { return 8; } else if(SystemCoreClock < 90000000) { return 9; } else if(SystemCoreClock < 100000000) { return 10; } else if(SystemCoreClock < 120000000) { return 11; } else if(SystemCoreClock < 130000000) { return 12; } else if(SystemCoreClock < 140000000) { return 13; } else if(SystemCoreClock < 150000000) { return 15; } else if(SystemCoreClock < 160000000) { return 16; } else { return 0; } } #ifndef min #define min(x, y) (((x)<(y))?(x):(y)) #endif /*---------------------------------------------------------------------------- Ethernet Device initialize *----------------------------------------------------------------------------*/ int ethernet_init() { int regv, tout; char mac[ETHERNET_ADDR_SIZE]; unsigned int clock = clockselect(); LPC_SC->PCONP |= 0x40000000; /* Power Up the EMAC controller. */ LPC_IOCON->P1_0 &= ~0x07; /* ENET I/O config */ LPC_IOCON->P1_0 |= 0x01; /* ENET_TXD0 */ LPC_IOCON->P1_1 &= ~0x07; LPC_IOCON->P1_1 |= 0x01; /* ENET_TXD1 */ LPC_IOCON->P1_4 &= ~0x07; LPC_IOCON->P1_4 |= 0x01; /* ENET_TXEN */ LPC_IOCON->P1_8 &= ~0x07; LPC_IOCON->P1_8 |= 0x01; /* ENET_CRS */ LPC_IOCON->P1_9 &= ~0x07; LPC_IOCON->P1_9 |= 0x01; /* ENET_RXD0 */ LPC_IOCON->P1_10 &= ~0x07; LPC_IOCON->P1_10 |= 0x01; /* ENET_RXD1 */ LPC_IOCON->P1_14 &= ~0x07; LPC_IOCON->P1_14 |= 0x01; /* ENET_RX_ER */ LPC_IOCON->P1_15 &= ~0x07; LPC_IOCON->P1_15 |= 0x01; /* ENET_REF_CLK */ LPC_IOCON->P1_16 &= ~0x07; /* ENET/PHY I/O config */ LPC_IOCON->P1_16 |= 0x01; /* ENET_MDC */ LPC_IOCON->P1_17 &= ~0x07; LPC_IOCON->P1_17 |= 0x01; /* ENET_MDIO */ /* Reset all EMAC internal modules. */ LPC_EMAC->MAC1 = MAC1_RES_TX | MAC1_RES_MCS_TX | MAC1_RES_RX | MAC1_RES_MCS_RX | MAC1_SIM_RES | MAC1_SOFT_RES; LPC_EMAC->Command = CR_REG_RES | CR_TX_RES | CR_RX_RES | CR_PASS_RUNT_FRM; for(tout = 100; tout; tout--) __NOP(); /* A short delay after reset. */ LPC_EMAC->MAC1 = MAC1_PASS_ALL; /* Initialize MAC control registers. */ LPC_EMAC->MAC2 = MAC2_CRC_EN | MAC2_PAD_EN; LPC_EMAC->MAXF = ETH_MAX_FLEN; LPC_EMAC->CLRT = CLRT_DEF; LPC_EMAC->IPGR = IPGR_DEF; LPC_EMAC->Command = CR_RMII | CR_PASS_RUNT_FRM; /* Enable Reduced MII interface. */ LPC_EMAC->MCFG = (clock << 0x2) & MCFG_CLK_SEL; /* Set clock */ LPC_EMAC->MCFG |= MCFG_RES_MII; /* and reset */ for(tout = 100; tout; tout--) __NOP(); /* A short delay */ LPC_EMAC->MCFG = (clock << 0x2) & MCFG_CLK_SEL; LPC_EMAC->MCMD = 0; LPC_EMAC->SUPP = SUPP_RES_RMII; /* Reset Reduced MII Logic. */ for (tout = 100; tout; tout--) __NOP(); /* A short delay */ LPC_EMAC->SUPP = 0; phy_write(PHY_REG_BMCR, PHY_BMCR_RESET); /* perform PHY reset */ for(tout = 0x20000; ; tout--) { /* Wait for hardware reset to end. */ regv = phy_read(PHY_REG_BMCR); if(regv < 0 || tout == 0) { return -1; /* Error */ } if(!(regv & PHY_BMCR_RESET)) { break; /* Reset complete. */ } } phy_id = (phy_read(PHY_REG_IDR1) << 16); phy_id |= (phy_read(PHY_REG_IDR2) & 0XFFF0); if (phy_id != DP83848C_ID && phy_id != LAN8720_ID) { error("Unknown Ethernet PHY (%x)", (unsigned int)phy_id); } ethernet_set_link(-1, 0); /* Set the Ethernet MAC Address registers */ ethernet_address(mac); LPC_EMAC->SA0 = ((uint32_t)mac[5] << 8) | (uint32_t)mac[4]; LPC_EMAC->SA1 = ((uint32_t)mac[3] << 8) | (uint32_t)mac[2]; LPC_EMAC->SA2 = ((uint32_t)mac[1] << 8) | (uint32_t)mac[0]; txdscr_init(); /* initialize DMA TX Descriptor */ rxdscr_init(); /* initialize DMA RX Descriptor */ LPC_EMAC->RxFilterCtrl = RFC_UCAST_EN | RFC_MCAST_EN | RFC_BCAST_EN | RFC_PERFECT_EN; /* Receive Broadcast, Perfect Match Packets */ LPC_EMAC->IntEnable = INT_RX_DONE | INT_TX_DONE; /* Enable EMAC interrupts. */ LPC_EMAC->IntClear = 0xFFFF; /* Reset all interrupts */ LPC_EMAC->Command |= (CR_RX_EN | CR_TX_EN); /* Enable receive and transmit mode of MAC Ethernet core */ LPC_EMAC->MAC1 |= MAC1_REC_EN; #if NEW_LOGIC rx_consume_offset = -1; tx_produce_offset = -1; #else send_doff = 0; send_idx = -1; send_size = 0; receive_soff = 0; receive_idx = -1; #endif return 0; } /*---------------------------------------------------------------------------- Ethernet Device Uninitialize *----------------------------------------------------------------------------*/ void ethernet_free() { LPC_EMAC->IntEnable &= ~(INT_RX_DONE | INT_TX_DONE); LPC_EMAC->IntClear = 0xFFFF; LPC_SC->PCONP &= ~0x40000000; /* Power down the EMAC controller. */ LPC_IOCON->P1_0 &= ~0x07; /* ENET I/O config */ LPC_IOCON->P1_1 &= ~0x07; LPC_IOCON->P1_4 &= ~0x07; LPC_IOCON->P1_8 &= ~0x07; LPC_IOCON->P1_9 &= ~0x07; LPC_IOCON->P1_10 &= ~0x07; LPC_IOCON->P1_14 &= ~0x07; LPC_IOCON->P1_15 &= ~0x07; LPC_IOCON->P1_16 &= ~0x07; /* ENET/PHY I/O config */ LPC_IOCON->P1_17 &= ~0x07; } // if(TxProduceIndex == TxConsumeIndex) buffer array is empty // if(TxProduceIndex == TxConsumeIndex - 1) buffer is full, should not fill // TxProduceIndex - The buffer that will/is being fileld by driver, s/w increment // TxConsumeIndex - The buffer that will/is beign sent by hardware int ethernet_write(const char *data, int slen) { #if NEW_LOGIC if(tx_produce_offset < 0) { // mark as active if not already tx_produce_offset = 0; } int index = LPC_EMAC->TxProduceIndex; int remaining = ETH_MAX_FLEN - tx_produce_offset - 4; // bytes written plus checksum int requested = slen; int ncopy = min(remaining, requested); void *pdst = (void *)(txdesc[index].Packet + tx_produce_offset); void *psrc = (void *)(data); if(ncopy > 0 ){ if(data != NULL) { memcpy(pdst, psrc, ncopy); } else { memset(pdst, 0, ncopy); } } tx_produce_offset += ncopy; return ncopy; #else void *pdst, *psrc; const int dlen = ETH_FRAG_SIZE; int copy = 0; int soff = 0; if(send_idx == -1) { send_idx = LPC_EMAC->TxProduceIndex; } if(slen + send_doff > ethernet_MTU_SIZE) { return -1; } do { copy = min(slen - soff, dlen - send_doff); pdst = (void *)(txdesc[send_idx].Packet + send_doff); psrc = (void *)(data + soff); if(send_doff + copy > ETH_FRAG_SIZE) { txdesc[send_idx].Ctrl = (send_doff-1) | (TCTRL_INT); send_idx = rinc(send_idx, NUM_TX_FRAG); send_doff = 0; } if(data != NULL) { memcpy(pdst, psrc, copy); } else { memset(pdst, 0, copy); } soff += copy; send_doff += copy; send_size += copy; } while(soff != slen); return soff; #endif } int ethernet_send() { #if NEW_LOGIC if(tx_produce_offset < 0) { // no buffer active return -1; } // ensure there is a link if(!ethernet_link()) { return -2; } // we have been writing in to a buffer, so finalise it int size = tx_produce_offset; int index = LPC_EMAC->TxProduceIndex; txdesc[index].Ctrl = (tx_produce_offset-1) | (TCTRL_INT | TCTRL_LAST); // Increment ProduceIndex to allow it to be sent // We can only do this if the next slot is free int next = rinc(index, NUM_TX_FRAG); while(next == LPC_EMAC->TxConsumeIndex) { for(int i=0; i<1000; i++) { __NOP(); } } LPC_EMAC->TxProduceIndex = next; tx_produce_offset = -1; return size; #else int s = send_size; txdesc[send_idx].Ctrl = (send_doff-1) | (TCTRL_INT | TCTRL_LAST); send_idx = rinc(send_idx, NUM_TX_FRAG); LPC_EMAC->TxProduceIndex = send_idx; send_doff = 0; send_idx = -1; send_size = 0; return s; #endif } // RxConsmeIndex - The index of buffer the driver will/is reading from. Driver should inc once read // RxProduceIndex - The index of buffer that will/is being filled by MAC. H/w will inc once rxd // // if(RxConsumeIndex == RxProduceIndex) buffer array is empty // if(RxConsumeIndex == RxProduceIndex + 1) buffer array is full // Recevies an arrived ethernet packet. // Receiving an ethernet packet will drop the last received ethernet packet // and make a new ethernet packet ready to read. // Returns size of packet, else 0 if nothing to receive // We read from RxConsumeIndex from position rx_consume_offset // if rx_consume_offset < 0, then we have not recieved the RxConsumeIndex packet for reading // rx_consume_offset = -1 // no frame // rx_consume_offset = 0 // start of frame // Assumption: A fragment should alway be a whole frame int ethernet_receive() { #if NEW_LOGIC // if we are currently reading a valid RxConsume buffer, increment to the next one if(rx_consume_offset >= 0) { LPC_EMAC->RxConsumeIndex = rinc(LPC_EMAC->RxConsumeIndex, NUM_RX_FRAG); } // if the buffer is empty, mark it as no valid buffer if(LPC_EMAC->RxConsumeIndex == LPC_EMAC->RxProduceIndex) { rx_consume_offset = -1; return 0; } uint32_t info = rxstat[LPC_EMAC->RxConsumeIndex].Info; rx_consume_offset = 0; // check if it is not marked as last or for errors if(!(info & RINFO_LAST_FLAG) || (info & RINFO_ERR_MASK)) { return -1; } int size = (info & RINFO_SIZE) + 1; return size - 4; // don't include checksum bytes #else if(receive_idx == -1) { receive_idx = LPC_EMAC->RxConsumeIndex; } else { while(!(rxstat[receive_idx].Info & RINFO_LAST_FLAG) && ((uint32_t)receive_idx != LPC_EMAC->RxProduceIndex)) { receive_idx = rinc(receive_idx, NUM_RX_FRAG); } unsigned int info = rxstat[receive_idx].Info; int slen = (info & RINFO_SIZE) + 1; if(slen > ethernet_MTU_SIZE || (info & RINFO_ERR_MASK)) { /* Invalid frame, ignore it and free buffer. */ receive_idx = rinc(receive_idx, NUM_RX_FRAG); } receive_idx = rinc(receive_idx, NUM_RX_FRAG); receive_soff = 0; LPC_EMAC->RxConsumeIndex = receive_idx; } if((uint32_t)receive_idx == LPC_EMAC->RxProduceIndex) { receive_idx = -1; return 0; } return (rxstat[receive_idx].Info & RINFO_SIZE) - 3; #endif } // Read from an recevied ethernet packet. // After receive returnd a number bigger than 0 it is // possible to read bytes from this packet. // Read will write up to size bytes into data. // It is possible to use read multible times. // Each time read will start reading after the last read byte before. int ethernet_read(char *data, int dlen) { #if NEW_LOGIC // Check we have a valid buffer to read if(rx_consume_offset < 0) { return 0; } // Assume 1 fragment block uint32_t info = rxstat[LPC_EMAC->RxConsumeIndex].Info; int size = (info & RINFO_SIZE) + 1 - 4; // exclude checksum int remaining = size - rx_consume_offset; int requested = dlen; int ncopy = min(remaining, requested); void *psrc = (void *)(rxdesc[LPC_EMAC->RxConsumeIndex].Packet + rx_consume_offset); void *pdst = (void *)(data); if(data != NULL && ncopy > 0) { memcpy(pdst, psrc, ncopy); } rx_consume_offset += ncopy; return ncopy; #else int slen; int copy = 0; unsigned int more; unsigned int info; void *pdst, *psrc; int doff = 0; if((uint32_t)receive_idx == LPC_EMAC->RxProduceIndex || receive_idx == -1) { return 0; } do { info = rxstat[receive_idx].Info; more = !(info & RINFO_LAST_FLAG); slen = (info & RINFO_SIZE) + 1; if(slen > ethernet_MTU_SIZE || (info & RINFO_ERR_MASK)) { /* Invalid frame, ignore it and free buffer. */ receive_idx = rinc(receive_idx, NUM_RX_FRAG); } else { copy = min(slen - receive_soff, dlen - doff); psrc = (void *)(rxdesc[receive_idx].Packet + receive_soff); pdst = (void *)(data + doff); if(data != NULL) { /* check if Buffer available */ memcpy(pdst, psrc, copy); } receive_soff += copy; doff += copy; if((more && (receive_soff == slen))) { receive_idx = rinc(receive_idx, NUM_RX_FRAG); receive_soff = 0; } } } while(more && !(doff == dlen) && !receive_soff); return doff; #endif } int ethernet_link(void) { if (phy_id == DP83848C_ID) { return (phy_read(PHY_REG_STS) & PHY_STS_LINK); } else { // LAN8720_ID return (phy_read(PHY_REG_BMSR) & PHY_BMSR_LINK); } } static int phy_write(unsigned int PhyReg, unsigned short Data) { unsigned int timeOut; LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg; LPC_EMAC->MWTD = Data; for(timeOut = 0; timeOut < MII_WR_TOUT; timeOut++) { /* Wait until operation completed */ if((LPC_EMAC->MIND & MIND_BUSY) == 0) { return 0; } } return -1; } static int phy_read(unsigned int PhyReg) { unsigned int timeOut; LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg; LPC_EMAC->MCMD = MCMD_READ; for(timeOut = 0; timeOut < MII_RD_TOUT; timeOut++) { /* Wait until operation completed */ if((LPC_EMAC->MIND & MIND_BUSY) == 0) { LPC_EMAC->MCMD = 0; return LPC_EMAC->MRDD; /* Return a 16-bit value. */ } } return -1; } static void txdscr_init() { int i; for(i = 0; i < NUM_TX_FRAG; i++) { txdesc[i].Packet = (uint32_t)&txbuf[i]; txdesc[i].Ctrl = 0; txstat[i].Info = 0; } LPC_EMAC->TxDescriptor = (uint32_t)txdesc; /* Set EMAC Transmit Descriptor Registers. */ LPC_EMAC->TxStatus = (uint32_t)txstat; LPC_EMAC->TxDescriptorNumber = NUM_TX_FRAG-1; LPC_EMAC->TxProduceIndex = 0; /* Tx Descriptors Point to 0 */ } static void rxdscr_init() { int i; for(i = 0; i < NUM_RX_FRAG; i++) { rxdesc[i].Packet = (uint32_t)&rxbuf[i]; rxdesc[i].Ctrl = RCTRL_INT | (ETH_FRAG_SIZE-1); rxstat[i].Info = 0; rxstat[i].HashCRC = 0; } LPC_EMAC->RxDescriptor = (uint32_t)rxdesc; /* Set EMAC Receive Descriptor Registers. */ LPC_EMAC->RxStatus = (uint32_t)rxstat; LPC_EMAC->RxDescriptorNumber = NUM_RX_FRAG-1; LPC_EMAC->RxConsumeIndex = 0; /* Rx Descriptors Point to 0 */ } void ethernet_address(char *mac) { mbed_mac_address(mac); } void ethernet_set_link(int speed, int duplex) { unsigned short phy_data; int tout; if((speed < 0) || (speed > 1)) { phy_data = PHY_AUTO_NEG; } else { phy_data = (((unsigned short) speed << 13) | ((unsigned short) duplex << 8)); } phy_write(PHY_REG_BMCR, phy_data); for (tout = 100; tout; tout--) { __NOP(); } /* A short delay */ switch(phy_id) { case DP83848C_ID: phy_data = phy_read(PHY_REG_STS); if(phy_data & PHY_STS_DUPLEX) { LPC_EMAC->MAC2 |= MAC2_FULL_DUP; LPC_EMAC->Command |= CR_FULL_DUP; LPC_EMAC->IPGT = IPGT_FULL_DUP; } else { LPC_EMAC->MAC2 &= ~MAC2_FULL_DUP; LPC_EMAC->Command &= ~CR_FULL_DUP; LPC_EMAC->IPGT = IPGT_HALF_DUP; } if(phy_data & PHY_STS_SPEED) { LPC_EMAC->SUPP &= ~SUPP_SPEED; } else { LPC_EMAC->SUPP |= SUPP_SPEED; } break; case LAN8720_ID: phy_data = phy_read(PHY_REG_SCSR); if (phy_data & PHY_SCSR_DUPLEX) { LPC_EMAC->MAC2 |= MAC2_FULL_DUP; LPC_EMAC->Command |= CR_FULL_DUP; LPC_EMAC->IPGT = IPGT_FULL_DUP; } else { LPC_EMAC->Command &= ~CR_FULL_DUP; LPC_EMAC->IPGT = IPGT_HALF_DUP; } if(phy_data & PHY_SCSR_100MBIT) { LPC_EMAC->SUPP |= SUPP_SPEED; } else { LPC_EMAC->SUPP &= ~SUPP_SPEED; } break; } } /* * The Embedded Artists LPC4088 QuickStart Board has an eeprom with a unique * 48 bit ID. This ID is used as MAC address. */ #include "i2c_api.h" static int _macRetrieved = 0; static char _macAddr[6] = {0x00,0x02,0xF7,0xF0,0x00,0x00}; #define EEPROM_24AA02E48_ADDR (0xA0) void mbed_mac_address(char *mac) { if (_macRetrieved == 0) { char tmp[6]; i2c_t i2cObj; i2c_init(&i2cObj, P0_27, P0_28); do { // the unique ID is at offset 0xFA tmp[0] = 0xFA; if (i2c_write(&i2cObj, EEPROM_24AA02E48_ADDR, tmp, 1, 1) != 1) { break; // failed to write } if (i2c_read(&i2cObj, EEPROM_24AA02E48_ADDR, tmp, 6, 1) != 6) { break; // failed to read } memcpy(_macAddr, tmp, 6); } while(0); // We always consider the MAC address to be retrieved even though // reading from the eeprom failed. If it wasn't possible to read // from eeprom the default address will be used. _macRetrieved = 1; } memcpy(mac, _macAddr, 6); }