mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_pwr.h
- Committer:
- janekm
- Date:
- 2014-09-16
- Revision:
- 310:6188e0254baa
- Parent:
- 106:ced8cbb51063
File content as of revision 310:6188e0254baa:
/** ****************************************************************************** * @file stm32l1xx_pwr.h * @author MCD Application Team * @version V1.3.0 * @date 31-January-2014 * @brief This file contains all the functions prototypes for the PWR firmware * library. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L1xx_PWR_H #define __STM32L1xx_PWR_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx.h" /** @addtogroup STM32L1xx_StdPeriph_Driver * @{ */ /** @addtogroup PWR * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup PWR_Exported_Constants * @{ */ /** @defgroup PWR_PVD_detection_level * @{ */ #define PWR_PVDLevel_0 PWR_CR_PLS_LEV0 #define PWR_PVDLevel_1 PWR_CR_PLS_LEV1 #define PWR_PVDLevel_2 PWR_CR_PLS_LEV2 #define PWR_PVDLevel_3 PWR_CR_PLS_LEV3 #define PWR_PVDLevel_4 PWR_CR_PLS_LEV4 #define PWR_PVDLevel_5 PWR_CR_PLS_LEV5 #define PWR_PVDLevel_6 PWR_CR_PLS_LEV6 #define PWR_PVDLevel_7 PWR_CR_PLS_LEV7 /* External input analog voltage (Compare internally to VREFINT) */ #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \ ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \ ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \ ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7)) /** * @} */ /** @defgroup PWR_WakeUp_Pins * @{ */ #define PWR_WakeUpPin_1 ((uint32_t)0x00000000) #define PWR_WakeUpPin_2 ((uint32_t)0x00000004) #define PWR_WakeUpPin_3 ((uint32_t)0x00000008) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || \ ((PIN) == PWR_WakeUpPin_2) || \ ((PIN) == PWR_WakeUpPin_3)) /** * @} */ /** @defgroup PWR_Voltage_Scaling_Ranges * @{ */ #define PWR_VoltageScaling_Range1 PWR_CR_VOS_0 #define PWR_VoltageScaling_Range2 PWR_CR_VOS_1 #define PWR_VoltageScaling_Range3 PWR_CR_VOS #define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_VoltageScaling_Range1) || \ ((RANGE) == PWR_VoltageScaling_Range2) || \ ((RANGE) == PWR_VoltageScaling_Range3)) /** * @} */ /** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode * @{ */ #define PWR_Regulator_ON ((uint32_t)0x00000000) #define PWR_Regulator_LowPower PWR_CR_LPSDSR #define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ ((REGULATOR) == PWR_Regulator_LowPower)) /** * @} */ /** @defgroup PWR_SLEEP_mode_entry * @{ */ #define PWR_SLEEPEntry_WFI ((uint8_t)0x01) #define PWR_SLEEPEntry_WFE ((uint8_t)0x02) #define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE)) /** * @} */ /** @defgroup PWR_STOP_mode_entry * @{ */ #define PWR_STOPEntry_WFI ((uint8_t)0x01) #define PWR_STOPEntry_WFE ((uint8_t)0x02) #define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) /** * @} */ /** @defgroup PWR_Flag * @{ */ #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define PWR_FLAG_PVDO PWR_CSR_PVDO #define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF #define PWR_FLAG_VOS PWR_CSR_VOSF #define PWR_FLAG_REGLP PWR_CSR_REGLPF #define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY) || \ ((FLAG) == PWR_FLAG_VOS) || ((FLAG) == PWR_FLAG_REGLP)) #define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions ------------------------------------------------------- */ /* Function used to set the PWR configuration to the default reset state ******/ void PWR_DeInit(void); /* RTC Domain Access function *************************************************/ void PWR_RTCAccessCmd(FunctionalState NewState); /* PVD configuration functions ************************************************/ void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); void PWR_PVDCmd(FunctionalState NewState); /* WakeUp pins configuration functions ****************************************/ void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState); /* Ultra Low Power mode configuration functions *******************************/ void PWR_FastWakeUpCmd(FunctionalState NewState); void PWR_UltraLowPowerCmd(FunctionalState NewState); /* Voltage Scaling configuration functions ************************************/ void PWR_VoltageScalingConfig(uint32_t PWR_VoltageScaling); /* Low Power modes configuration functions ************************************/ void PWR_EnterLowPowerRunMode(FunctionalState NewState); void PWR_EnterSleepMode(uint32_t PWR_Regulator, uint8_t PWR_SLEEPEntry); void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); void PWR_EnterSTANDBYMode(void); /* Flags management functions *************************************************/ FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); void PWR_ClearFlag(uint32_t PWR_FLAG); #ifdef __cplusplus } #endif #endif /* __STM32L1xx_PWR_H */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/