mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal_crc.h
- Committer:
- janekm
- Date:
- 2014-09-16
- Revision:
- 310:6188e0254baa
- Parent:
- 218:44081b78fdc2
File content as of revision 310:6188e0254baa:
/** ****************************************************************************** * @file stm32f0xx_hal_crc.h * @author MCD Application Team * @version V1.0.0 * @date 28-May-2014 * @brief Header file of CRC HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_CRC_H #define __STM32F0xx_HAL_CRC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal_def.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @addtogroup CRC * @{ */ /* Exported types ------------------------------------------------------------*/ /** * @brief CRC HAL State Structure definition */ typedef enum { HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */ }HAL_CRC_StateTypeDef; /** * @brief CRC Init Structure definition */ typedef struct { uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1. In that case, there is no need to set GeneratingPolynomial field. If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. If set to DEFAULT_INIT_VALUE_ENABLE, resort to default 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set */ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree respectively equal to 7, 8, 16 or 32. This field is written in normal representation, e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65. No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */ uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Size_Definitions and indicates CRC length. Value can be either one of CRC_POLYLENGTH_32B (32-bit CRC) CRC_POLYLENGTH_16B (16-bit CRC) CRC_POLYLENGTH_8B (8-bit CRC) CRC_POLYLENGTH_7B (7-bit CRC) */ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse is set to DEFAULT_INIT_VALUE_ENABLE */ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. Can be either one of the following values CRC_INPUTDATA_INVERSION_NONE no input data inversion CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2 CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. Can be either CRC_OUTPUTDATA_INVERSION_DISABLED no CRC inversion, or CRC_OUTPUTDATA_INVERSION_ENABLED CRC 0x11223344 is converted into 0x22CC4488 */ }CRC_InitTypeDef; /** * @brief CRC Handle Structure definition */ typedef struct { CRC_TypeDef *Instance; /*!< Register base address */ CRC_InitTypeDef Init; /*!< CRC configuration parameters */ HAL_LockTypeDef Lock; /*!< CRC Locking object */ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. Can be either CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data) CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data) CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bits data) Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error must occur if InputBufferFormat is not one of the three values listed above */ }CRC_HandleTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial * @{ */ #define DEFAULT_CRC32_POLY 0x04C11DB7 /** * @} */ /** @defgroup CRC_Default_InitValue Default CRC computation initialization value * @{ */ #define DEFAULT_CRC_INITVALUE 0xFFFFFFFF /** * @} */ /** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used * @{ */ #define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00) #define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01) #define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) /** * @} */ /** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used * @{ */ #define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00) #define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01) #define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) /** * @} */ /** @defgroup CRC_Input_Buffer_Format Input Buffer Format * @{ */ /* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for * the CRC APIs to provide a correct result */ #define CRC_INPUTDATA_FORMAT_UNDEFINED ((uint32_t)0x00000000) #define CRC_INPUTDATA_FORMAT_BYTES ((uint32_t)0x00000001) #define CRC_INPUTDATA_FORMAT_HALFWORDS ((uint32_t)0x00000002) #define CRC_INPUTDATA_FORMAT_WORDS ((uint32_t)0x00000003) #define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup CRC_Exported_Macros * @{ */ /** @brief Reset CRC handle state * @param __HANDLE__: CRC handle. * @retval None */ #define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) /** * @brief Reset CRC Data Register. * @param __HANDLE__: CRC handle * @retval None. */ #define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) /** * @brief Set CRC INIT non-default value * @param __HANDLE__ : CRC handle * @param __INIT__ : 32-bit initial value * @retval None. */ #define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) /** * @} */ /* Include CRC HAL Extension module */ #include "stm32f0xx_hal_crc_ex.h" /* Exported functions --------------------------------------------------------*/ /* Initialization and de-initialization functions ****************************/ HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc); void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); /* Aliases for inter STM32 series compatibility */ #define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse #define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /* Peripheral Control functions ***********************************************/ uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); /* Peripheral State and Error functions ***************************************/ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F0xx_HAL_CRC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/