mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal_comp.h
- Committer:
- janekm
- Date:
- 2014-09-16
- Revision:
- 310:6188e0254baa
- Parent:
- 218:44081b78fdc2
File content as of revision 310:6188e0254baa:
/** ****************************************************************************** * @file stm32f0xx_hal_comp.h * @author MCD Application Team * @version V1.0.0 * @date 28-May-2014 * @brief Header file of COMP HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_COMP_H #define __STM32F0xx_HAL_COMP_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F051x8) || defined(STM32F058xx) || \ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal_def.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @addtogroup COMP * @{ */ /* Exported types ------------------------------------------------------------*/ /** * @brief COMP Init structure definition */ typedef struct { uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. This parameter can be a value of @ref COMP_InvertingInput */ uint32_t Output; /*!< Selects the output redirection of the comparator. This parameter can be a value of @ref COMP_Output */ uint32_t OutputPol; /*!< Selects the output polarity of the comparator. This parameter can be a value of @ref COMP_OutputPolarity */ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator. This parameter can be a value of @ref COMP_Hysteresis */ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator to adjust the speed/consumption. This parameter can be a value of @ref COMP_Mode */ uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2. This parameter can be a value of @ref COMP_WindowMode */ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). This parameter can be a value of @ref COMP_TriggerMode */ }COMP_InitTypeDef; /** * @brief HAL State structures definition */ typedef enum { HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */ HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */ HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ }HAL_COMP_StateTypeDef; /** * @brief PPP Handle Structure definition */ typedef struct { COMP_TypeDef *Instance; /*!< Register base address */ COMP_InitTypeDef Init; /*!< COMP required parameters */ HAL_LockTypeDef Lock; /*!< Locking object */ __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ }COMP_HandleTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup COMP_Exported_Constants * @{ */ /** @defgroup COMP_OutputPolarity * @{ */ #define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ #define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */ #define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \ ((POL) == COMP_OUTPUTPOL_INVERTED)) /** * @} */ /** @defgroup COMP_Hysteresis * @{ */ #define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */ #define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */ #define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */ #define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */ #define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH)) /** * @} */ /** @defgroup COMP_Mode * @{ */ /* Please refer to the electrical characteristics in the device datasheet for the power consumption values */ #define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */ #define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */ #define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */ #define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */ #define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \ ((MODE) == COMP_MODE_MEDIUMSPEED) || \ ((MODE) == COMP_MODE_LOWPOWER) || \ ((MODE) == COMP_MODE_ULTRALOWPOWER)) /** * @} */ /** @defgroup COMP_InvertingInput * @{ */ #define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input and close switch (PA0 for COMP1 only) */ #define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */ #define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */ #define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \ ((INPUT) == COMP_INVERTINGINPUT_DAC2) || \ ((INPUT) == COMP_INVERTINGINPUT_IO1)) /** * @} */ /** @defgroup COMP_Output * @{ */ /* Output Redirection common for COMP1 and COMP2 */ #define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ #define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ #define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */ #define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */ #define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */ #define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */ #define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */ #define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */ #define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR)) /** * @} */ /** @defgroup COMP_OutputLevel * @{ */ /* When output polarity is not inverted, comparator output is low when the non-inverting input is at a lower voltage than the inverting input*/ #define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000) /* When output polarity is not inverted, comparator output is high when the non-inverting input is at a higher voltage than the inverting input */ #define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT /** * @} */ /** @defgroup COMP_TriggerMode * @{ */ #define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */ #define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */ #define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */ #define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ #define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \ ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \ ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \ ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING)) /** * @} */ /** @defgroup COMP_WindowMode * @{ */ #define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */ #define COMP_WINDOWMODE_ENABLED COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2 is connected to the non inverting input of comparator 1 (PA1) */ #define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED)) /** * @} */ /** @defgroup COMP_ExtiLineEvent * Elements values convention: XXXX0000 * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register * @{ */ #define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */ #define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */ /** * @} */ #define COMP_LOCK_DISABLE ((uint32_t)0x00000000) #define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK #define COMP_STATE_BIT_LOCK ((uint32_t)0x10) /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @brief Reset COMP handle state * @param __HANDLE__: COMP handle. * @retval None */ #define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) /** * @brief Checks whether the specified EXTI line flag is set or not. * @param __FLAG__: specifies the COMP Exti sources to be checked. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval The state of __FLAG__ (SET or RESET). */ #define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__)) /** * @brief Clear the COMP Exti flags. * @param __FLAG__: specifies the COMP Exti sources to be cleared. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR |= (__FLAG__)) /** * @brief Enable the COMP Exti Line. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__)) /** * @brief Disable the COMP Exti Line. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__)) /** * @brief Enable the Exti Line rising edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__)) /** * @brief Disable the Exti Line rising edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__)) /** * @brief Enable the Exti Line falling edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__)) /** * @brief Disable the Exti Line falling edge trigger. * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. * This parameter can be a value of @ref COMP_ExtiLineEvent * @retval None. */ #define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__)) /** * @brief Get the specified EXTI line for a comparator instance * @param __INSTANCE__: specifies the COMP instance. * @retval value of @ref COMP_ExtiLineEvent */ #define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \ COMP_EXTI_LINE_COMP2_EVENT) /* Exported functions --------------------------------------------------------*/ /* Initialization and de-initialization functions ****************************/ HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); /* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); /* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); /* Callback in Interrupt mode */ void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); /* Peripheral State and Error functions ***************************************/ HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); /** * @} */ /** * @} */ #endif /* STM32F051x8 || STM32F058xx || */ /* STM32F071xB || STM32F072xB || STM32F078xx */ #ifdef __cplusplus } #endif #endif /* __STM32F0xx_HAL_COMP_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/