mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_DISCO_F100RB/stm32f10x_dbgmcu.c
- Committer:
- janekm
- Date:
- 2014-09-16
- Revision:
- 310:6188e0254baa
- Parent:
- 126:549ba18ddd81
File content as of revision 310:6188e0254baa:
/** ****************************************************************************** * @file stm32f10x_dbgmcu.c * @author MCD Application Team * @version V3.6.1 * @date 05-March-2012 * @brief This file provides all the DBGMCU firmware functions. ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_dbgmcu.h" /** @addtogroup STM32F10x_StdPeriph_Driver * @{ */ /** @defgroup DBGMCU * @brief DBGMCU driver modules * @{ */ /** @defgroup DBGMCU_Private_TypesDefinitions * @{ */ /** * @} */ /** @defgroup DBGMCU_Private_Defines * @{ */ #define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) /** * @} */ /** @defgroup DBGMCU_Private_Macros * @{ */ /** * @} */ /** @defgroup DBGMCU_Private_Variables * @{ */ /** * @} */ /** @defgroup DBGMCU_Private_FunctionPrototypes * @{ */ /** * @} */ /** @defgroup DBGMCU_Private_Functions * @{ */ /** * @brief Returns the device revision identifier. * @param None * @retval Device revision identifier */ uint32_t DBGMCU_GetREVID(void) { return(DBGMCU->IDCODE >> 16); } /** * @brief Returns the device identifier. * @param None * @retval Device identifier */ uint32_t DBGMCU_GetDEVID(void) { return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); } /** * @brief Configures the specified peripheral and low power mode behavior * when the MCU under Debug mode. * @param DBGMCU_Periph: specifies the peripheral and low power mode. * This parameter can be any combination of the following values: * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode * @arg DBGMCU_STOP: Keep debugger connection during STOP mode * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted * @param NewState: new state of the specified peripheral in Debug mode. * This parameter can be: ENABLE or DISABLE. * @retval None */ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) { /* Check the parameters */ assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); assert_param(IS_FUNCTIONAL_STATE(NewState)); if (NewState != DISABLE) { DBGMCU->CR |= DBGMCU_Periph; } else { DBGMCU->CR &= ~DBGMCU_Periph; } } /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/