mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F072RB/stm32f0xx_hal.h
- Committer:
- mbed_official
- Date:
- 2014-05-30
- Revision:
- 218:44081b78fdc2
- Parent:
- 205:c41fc65bcfb4
File content as of revision 218:44081b78fdc2:
/** ****************************************************************************** * @file stm32f0xx_hal.h * @author MCD Application Team * @version V1.0.0 * @date 28-May-2014 * @brief This file contains all the functions prototypes for the HAL * module driver. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_H #define __STM32F0xx_HAL_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal_conf.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @addtogroup HAL * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup HAL_DMA_Remapping * Elements values convention: 0xYYYYYYYY * - YYYYYYYY : Position in the SYSCFG register CFGR1 * @{ */ #define HAL_REMAPDMA_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap 0: No remap (ADC DMA requests mapped on DMA channel 1 1: Remap (ADC DMA requests mapped on DMA channel 2 */ #define HAL_REMAPDMA_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap 0: No remap (USART1_TX DMA request mapped on DMA channel 2 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */ #define HAL_REMAPDMA_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap 0: No remap (USART1_RX DMA request mapped on DMA channel 3 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */ #define HAL_REMAPDMA_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3) 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */ #define HAL_REMAPDMA_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */ #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) #define HAL_REMAPDMA_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit) 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */ #define HAL_REMAPDMA_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit) 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */ #define HAL_REMAPDMA_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively) 1: 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ #define HAL_REMAPDMA_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively) 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ #define HAL_REMAPDMA_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively) 1: 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ #define HAL_REMAPDMA_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively) 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */ #define HAL_REMAPDMA_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively) 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */ #define HAL_REMAPDMA_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively) 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */ #define HAL_REMAPDMA_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only. 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4) 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */ #endif #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) #define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2) || \ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH6) || \ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH7) || \ ((RMP) == HAL_REMAPDMA_SPI2_DMA_CH67) || \ ((RMP) == HAL_REMAPDMA_USART2_DMA_CH67) || \ ((RMP) == HAL_REMAPDMA_USART3_DMA_CH32) || \ ((RMP) == HAL_REMAPDMA_I2C1_DMA_CH76) || \ ((RMP) == HAL_REMAPDMA_TIM1_DMA_CH6) || \ ((RMP) == HAL_REMAPDMA_TIM2_DMA_CH7) || \ ((RMP) == HAL_REMAPDMA_TIM3_DMA_CH6)) #else #define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2)) #endif /** * @} */ #if defined(STM32F042x6) || defined(STM32F048xx) /** @defgroup HAL_Pin_Remapping * @{ */ #define HAL_REMAP_PA11_PA12 (SYSCFG_CFGR1_PA11_PA12_RMP) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins). 0: No remap (pin pair PA9/10 mapped on the pins) 1: Remap (pin pair PA11/12 mapped instead of PA9/10) */ #define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12) /** * @} */ #endif /* STM32F042x6 || STM32F048xx */ /** @defgroup HAL_FastModePlus_I2C * @{ */ #define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 (SYSCFG_CFGR1_I2C_FMP_PB6) /*!< Fast Mode Plus (FM+) driving capability activation on the pad 0: PB6 pin operates in standard mode 1: I2C FM+ mode enabled on PB6 pin, and the Speed control is bypassed */ #define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 (SYSCFG_CFGR1_I2C_FMP_PB7) /*!< Fast Mode Plus (FM+) driving capability activation on the pad 0: PB7 pin operates in standard mode 1: I2C FM+ mode enabled on PB7 pin, and the Speed control is bypassed */ #define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 (SYSCFG_CFGR1_I2C_FMP_PB8) /*!< Fast Mode Plus (FM+) driving capability activation on the pad 0: PB8 pin operates in standard mode 1: I2C FM+ mode enabled on PB8 pin, and the Speed control is bypassed */ #define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 (SYSCFG_CFGR1_I2C_FMP_PB9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad 0: PB9 pin operates in standard mode 1: I2C FM+ mode enabled on PB9 pin, and the Speed control is bypassed */ #if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \ defined(STM32F042x6) || defined(STM32F048xx) || \ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) #define HAL_SYSCFG_FASTMODEPLUS_I2C1 (SYSCFG_CFGR1_I2C_FMP_I2C1) /*!< I2C1 fast mode Plus driving capability activation 0: FM+ mode is not enabled on I2C1 pins selected through AF selection bits 1: FM+ mode is enabled on I2C1 pins selected through AF selection bits */ #endif #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) #define HAL_SYSCFG_FASTMODEPLUS_I2C2 (SYSCFG_CFGR1_I2C_FMP_I2C2) /*!< I2C2 fast mode Plus driving capability activation 0: FM+ mode is not enabled on I2C2 pins selected through AF selection bits 1: FM+ mode is enabled on I2C2 pins selected through AF selection bits */ #endif #if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) #define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad 0: PA9 pin operates in standard mode 1: FM+ mode is enabled on PA9 pin, and the Speed control is bypassed */ #define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad 0: PA10 pin operates in standard mode 1: FM+ mode is enabled on PA10 pin, and the Speed control is bypassed */ #endif /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @brief Freeze/Unfreeze Peripherals in Debug mode */ #define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) #define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) #define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) #define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) #define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) #define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) #define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) #define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) #define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) #define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) #define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) #define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) #if defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F051x8) || \ defined(STM32F071xB) || defined(STM32F072xB) || \ defined(STM32F038xx) || defined(STM32F058xx) || defined(STM32F078xx) #define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) #define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) #endif /* STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F051x8 || */ /* STM32F071xB || STM32F072xB || */ /* STM32F038xx || STM32F058xx || STM32F078xx */ #if defined(STM32F030x8) || defined(STM32F051x8) || \ defined(STM32F071xB) || defined(STM32F072xB) || \ defined(STM32F058xx) || defined(STM32F078xx) #define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) #define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) #endif /* STM32F030x8 || STM32F051x8 || */ /* STM32F071xB || STM32F072xB || */ /* STM32F058xx || STM32F078xx */ #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) #define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) #define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) #endif /* STM32F071xB || STM32F072xB || STM32F078xx */ #if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) #define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) #define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) #endif /* STM32F042x6 || STM32F072xB */ #define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) #define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) #if defined(STM32F030x8) || defined(STM32F051x8) || \ defined(STM32F071xB) || defined(STM32F072xB) || \ defined(STM32F058xx) || defined(STM32F078xx) #define __HAL_FREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP)) #define __HAL_UNFREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP)) #endif /* STM32F030x8 || STM32F051x8 || */ /* STM32F071xB || STM32F072xB || */ /* STM32F058xx || STM32F078xx */ #define __HAL_FREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP)) #define __HAL_UNFREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP)) #define __HAL_FREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP)) #define __HAL_UNFREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP)) /** @brief Main Flash memory mapped at 0x00000000 */ #define __HAL_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE)) /** @brief System Flash memory mapped at 0x00000000 */ #define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \ }while(0) /** @brief Embedded SRAM mapped at 0x00000000 */ #define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \ }while(0) /** @brief DMA remapping enable/disable macros * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_Remapping */ #define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \ SYSCFG->CFGR1 |= (__DMA_REMAP__); \ }while(0) #define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \ }while(0) #if defined(STM32F042x6) || defined(STM32F048xx) /** @brief Pin remapping enable/disable macros * @param __PIN_REMAP__: This parameter can be a value of @ref HAL_Pin_Remapping */ #define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \ SYSCFG->CFGR1 |= (__PIN_REMAP__); \ }while(0) #define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__DMA_REMAP__))); \ SYSCFG->CFGR1 &= ~(__PIN_REMAP__); \ }while(0) #endif /* STM32F042x6 || STM32F048xx */ /** @brief Fast mode Plus driving capability enable/disable macros * @param __FASTMODEPLUS__: This parameter can be a value of @ref HAL_FastModePlus_I2C */ #define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \ SYSCFG->CFGR1 |= (__FASTMODEPLUS__); \ }while(0) #define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \ SYSCFG->CFGR1 &= ~(__FASTMODEPLUS__); \ }while(0) /** @brief SYSCFG Break Lockup lock * Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input * @note The selected configuration is locked and can be unlocked by system reset */ #define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ }while(0) #if defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F051x8) || \ defined(STM32F071xB) || defined(STM32F072xB) /** @brief SYSCFG Break PVD lock * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register * @note The selected configuration is locked and can be unlocked by system reset */ #define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ }while(0) #endif /* STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F051x8) || */ /* STM32F071xB || STM32F072xB */ /** @brief SYSCFG Break SRAM PARITY lock * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17 * @note The selected configuration is locked and can be unlocked by system reset */ #define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \ }while(0) /** * @brief Parity check on RAM disable macro * @note Disabling the parity check on RAM locks the configuration bit. * To re-enable the parity check on RAM perform a system reset. */ #define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF) /* Exported functions --------------------------------------------------------*/ /* Initialization and de-initialization functions ****************************/ HAL_StatusTypeDef HAL_Init(void); HAL_StatusTypeDef HAL_DeInit(void); void HAL_MspInit(void); void HAL_MspDeInit(void); HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); /* Peripheral Control functions **********************************************/ void HAL_IncTick(void); void HAL_Delay(__IO uint32_t Delay); uint32_t HAL_GetTick(void); void HAL_SuspendTick(void); void HAL_ResumeTick(void); uint32_t HAL_GetHalVersion(void); uint32_t HAL_GetREVID(void); uint32_t HAL_GetDEVID(void); void HAL_EnableDBGStopMode(void); void HAL_DisableDBGStopMode(void); void HAL_EnableDBGStandbyMode(void); void HAL_DisableDBGStandbyMode(void); /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F0xx_HAL_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/