mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: cpp/SPI.h
- Revision:
- 0:fd0d7bdfcdc2
- Child:
- 2:143cac498751
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/cpp/SPI.h Tue Nov 20 17:24:08 2012 +0000 @@ -0,0 +1,115 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2012 ARM Limited + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef MBED_SPI_H +#define MBED_SPI_H + +#include "platform.h" + +#if DEVICE_SPI + +#include "spi_api.h" + +namespace mbed { + +/** A SPI Master, used for communicating with SPI slave devices + * + * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz + * + * Most SPI devices will also require Chip Select and Reset signals. These + * can be controlled using <DigitalOut> pins + * + * Example: + * @code + * // Send a byte to a SPI slave, and record the response + * + * #include "mbed.h" + * + * SPI device(p5, p6, p7); // mosi, miso, sclk + * + * int main() { + * int response = device.write(0xFF); + * } + * @endcode + */ +class SPI { + +public: + + /** Create a SPI master connected to the specified pins + * + * Pin Options: + * (5, 6, 7) or (11, 12, 13) + * + * mosi or miso can be specfied as NC if not used + * + * @param mosi SPI Master Out, Slave In pin + * @param miso SPI Master In, Slave Out pin + * @param sclk SPI Clock pin + */ + SPI(PinName mosi, PinName miso, PinName sclk); + + /** Configure the data transmission format + * + * @param bits Number of bits per SPI frame (4 - 16) + * @param mode Clock polarity and phase mode (0 - 3) + * + * @code + * mode | POL PHA + * -----+-------- + * 0 | 0 0 + * 1 | 0 1 + * 2 | 1 0 + * 3 | 1 1 + * @endcode + */ + void format(int bits, int mode = 0); + + /** Set the spi bus clock frequency + * + * @param hz SCLK frequency in hz (default = 1MHz) + */ + void frequency(int hz = 1000000); + + /** Write to the SPI Slave and return the response + * + * @param value Data to be sent to the SPI slave + * + * @returns + * Response from the SPI slave + */ + virtual int write(int value); + +protected: + spi_t _spi; + + void aquire(void); + static SPI *_owner; + int _bits; + int _mode; + int _hz; +}; + +} // namespace mbed + +#endif + +#endif