mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_pwr.h
- Revision:
- 76:aeb1df146756
- Child:
- 106:ced8cbb51063
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_pwr.h Mon Jan 27 14:30:07 2014 +0000 @@ -0,0 +1,197 @@ +/** + ****************************************************************************** + * @file stm32f0xx_pwr.h + * @author MCD Application Team + * @version V1.3.0 + * @date 16-January-2014 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_PWR_H +#define __STM32F0XX_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level + * @brief This parameters are only applicable for STM32F051 and STM32F072 devices + * @{ + */ + +#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7 + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \ + ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \ + ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \ + ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7)) +/** + * @} + */ + +/** @defgroup PWR_WakeUp_Pins + * @{ + */ + +#define PWR_WakeUpPin_1 PWR_CSR_EWUP1 +#define PWR_WakeUpPin_2 PWR_CSR_EWUP2 +#define PWR_WakeUpPin_3 PWR_CSR_EWUP3 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_4 PWR_CSR_EWUP4 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_5 PWR_CSR_EWUP5 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_6 PWR_CSR_EWUP6 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_7 PWR_CSR_EWUP7 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_8 PWR_CSR_EWUP8 /*!< only applicable for STM32F072 devices */ +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || ((PIN) == PWR_WakeUpPin_2) || \ + ((PIN) == PWR_WakeUpPin_3) || ((PIN) == PWR_WakeUpPin_4) || \ + ((PIN) == PWR_WakeUpPin_5) || ((PIN) == PWR_WakeUpPin_6) || \ + ((PIN) == PWR_WakeUpPin_7) || ((PIN) == PWR_WakeUpPin_8)) +/** + * @} + */ + + +/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower PWR_CR_LPSDSR +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry + * @{ + */ + +#define PWR_SLEEPEntry_WFI ((uint8_t)0x01) +#define PWR_SLEEPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define PWR_STOPEntry_SLEEPONEXIT ((uint8_t)0x03) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE) ||\ + ((ENTRY) == PWR_STOPEntry_SLEEPONEXIT)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO /*!< Not applicable for STM32F030 devices */ +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF + +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the PWR configuration to the default reset state ******/ +void PWR_DeInit(void); + +/* Backup Domain Access function **********************************************/ +void PWR_BackupAccessCmd(FunctionalState NewState); + +/* PVD configuration functions ************************************************/ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); /*!< only applicable for STM32F051 and STM32F072 devices */ +void PWR_PVDCmd(FunctionalState NewState); /*!< only applicable for STM32F051 and STM32F072 devices */ + +/* WakeUp pins configuration functions ****************************************/ +void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState); + +/* Low Power modes configuration functions ************************************/ +void PWR_EnterSleepMode(uint8_t PWR_SLEEPEntry); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); + +/* Flags management functions *************************************************/ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_PWR_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/