mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crc.c
- Revision:
- 76:aeb1df146756
- Child:
- 106:ced8cbb51063
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crc.c Mon Jan 27 14:30:07 2014 +0000 @@ -0,0 +1,361 @@ +/** + ****************************************************************************** + * @file stm32f0xx_crc.c + * @author MCD Application Team + * @version V1.3.0 + * @date 16-January-2014 + * @brief This file provides firmware functions to manage the following + * functionalities of CRC computation unit peripheral: + * + Configuration of the CRC computation unit + * + CRC computation of one/many 32-bit data + * + CRC Independent register (IDR) access + * + * @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + + (+) Enable CRC AHB clock using RCC_AHBPeriphClockCmd(RCC_AHBPeriph_CRC, ENABLE) + function + (+) If required, select the reverse operation on input data + using CRC_ReverseInputDataSelect() + (+) If required, enable the reverse operation on output data + using CRC_ReverseOutputDataCmd(Enable) + (+) use CRC_CalcCRC() function to compute the CRC of a 32-bit data + or use CRC_CalcBlockCRC() function to compute the CRC if a 32-bit + data buffer + (@) To compute the CRC of a new data use CRC_ResetDR() to reset + the CRC computation unit before starting the computation + otherwise you can get wrong CRC values. + + @endverbatim + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_crc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRC_Private_Functions + * @{ + */ + +/** @defgroup CRC_Group1 Configuration of the CRC computation unit functions + * @brief Configuration of the CRC computation unit functions + * +@verbatim + =============================================================================== + ##### CRC configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes CRC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void CRC_DeInit(void) +{ + /* Set DR register to reset value */ + CRC->DR = 0xFFFFFFFF; + + /* Set the POL register to the reset value: 0x04C11DB7 */ + CRC->POL = 0x04C11DB7; + + /* Reset IDR register */ + CRC->IDR = 0x00; + + /* Set INIT register to reset value */ + CRC->INIT = 0xFFFFFFFF; + + /* Reset the CRC calculation unit */ + CRC->CR = CRC_CR_RESET; +} + +/** + * @brief Resets the CRC calculation unit and sets INIT register content in DR register. + * @param None + * @retval None + */ +void CRC_ResetDR(void) +{ + /* Reset CRC generator */ + CRC->CR |= CRC_CR_RESET; +} + +/** + * @brief Selects the polynomial size. This function is only applicable for + * STM32F072 devices. + * @param CRC_PolSize: Specifies the polynomial size. + * This parameter can be: + * @arg CRC_PolSize_7: 7-bit polynomial for CRC calculation + * @arg CRC_PolSize_8: 8-bit polynomial for CRC calculation + * @arg CRC_PolSize_16: 16-bit polynomial for CRC calculation + * @arg CRC_PolSize_32: 32-bit polynomial for CRC calculation + * @retval None + */ +void CRC_PolynomialSizeSelect(uint32_t CRC_PolSize) +{ + uint32_t tmpcr = 0; + + /* Check the parameter */ + assert_param(IS_CRC_POL_SIZE(CRC_PolSize)); + + /* Get CR register value */ + tmpcr = CRC->CR; + + /* Reset POL_SIZE bits */ + tmpcr &= (uint32_t)~((uint32_t)CRC_CR_POLSIZE); + /* Set the polynomial size */ + tmpcr |= (uint32_t)CRC_PolSize; + + /* Write to CR register */ + CRC->CR = (uint32_t)tmpcr; +} + +/** + * @brief Selects the reverse operation to be performed on input data. + * @param CRC_ReverseInputData: Specifies the reverse operation on input data. + * This parameter can be: + * @arg CRC_ReverseInputData_No: No reverse operation is performed + * @arg CRC_ReverseInputData_8bits: reverse operation performed on 8 bits + * @arg CRC_ReverseInputData_16bits: reverse operation performed on 16 bits + * @arg CRC_ReverseInputData_32bits: reverse operation performed on 32 bits + * @retval None + */ +void CRC_ReverseInputDataSelect(uint32_t CRC_ReverseInputData) +{ + uint32_t tmpcr = 0; + + /* Check the parameter */ + assert_param(IS_CRC_REVERSE_INPUT_DATA(CRC_ReverseInputData)); + + /* Get CR register value */ + tmpcr = CRC->CR; + + /* Reset REV_IN bits */ + tmpcr &= (uint32_t)~((uint32_t)CRC_CR_REV_IN); + /* Set the reverse operation */ + tmpcr |= (uint32_t)CRC_ReverseInputData; + + /* Write to CR register */ + CRC->CR = (uint32_t)tmpcr; +} + +/** + * @brief Enables or disable the reverse operation on output data. + * The reverse operation on output data is performed on 32-bit. + * @param NewState: new state of the reverse operation on output data. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRC_ReverseOutputDataCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable reverse operation on output data */ + CRC->CR |= CRC_CR_REV_OUT; + } + else + { + /* Disable reverse operation on output data */ + CRC->CR &= (uint32_t)~((uint32_t)CRC_CR_REV_OUT); + } +} + +/** + * @brief Initializes the INIT register. + * @note After resetting CRC calculation unit, CRC_InitValue is stored in DR register + * @param CRC_InitValue: Programmable initial CRC value + * @retval None + */ +void CRC_SetInitRegister(uint32_t CRC_InitValue) +{ + CRC->INIT = CRC_InitValue; +} + +/** + * @brief Initializes the polynomail coefficients. This function is only + * applicable for STM32F072 devices. + * @param CRC_Pol: Polynomial to be used for CRC calculation. + * @retval None + */ +void CRC_SetPolynomial(uint32_t CRC_Pol) +{ + CRC->POL = CRC_Pol; +} + +/** + * @} + */ + +/** @defgroup CRC_Group2 CRC computation of one/many 32-bit data functions + * @brief CRC computation of one/many 32-bit data functions + * +@verbatim + =============================================================================== + ##### CRC computation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * @param CRC_Data: data word(32-bit) to compute its CRC + * @retval 32-bit CRC + */ +uint32_t CRC_CalcCRC(uint32_t CRC_Data) +{ + CRC->DR = CRC_Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 16-bit CRC of a given 16-bit data. This function is only + * applicable for STM32F072 devices. + * @param CRC_Data: data half-word(16-bit) to compute its CRC + * @retval 16-bit CRC + */ +uint32_t CRC_CalcCRC16bits(uint16_t CRC_Data) +{ + *(uint16_t*)(CRC_BASE) = (uint16_t) CRC_Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 8-bit CRC of a given 8-bit data. This function is only + * applicable for STM32F072 devices. + * @param CRC_Data: 8-bit data to compute its CRC + * @retval 8-bit CRC + */ +uint32_t CRC_CalcCRC8bits(uint8_t CRC_Data) +{ + *(uint8_t*)(CRC_BASE) = (uint8_t) CRC_Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++) + { + CRC->DR = pBuffer[index]; + } + return (CRC->DR); +} + +/** + * @brief Returns the current CRC value. + * @param None + * @retval 32-bit CRC + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DR); +} + +/** + * @} + */ + +/** @defgroup CRC_Group3 CRC Independent Register (IDR) access functions + * @brief CRC Independent Register (IDR) access (write/read) functions + * +@verbatim + =============================================================================== + ##### CRC Independent Register (IDR) access functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Stores an 8-bit data in the Independent Data(ID) register. + * @param CRC_IDValue: 8-bit value to be stored in the ID register + * @retval None + */ +void CRC_SetIDRegister(uint8_t CRC_IDValue) +{ + CRC->IDR = CRC_IDValue; +} + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register + * @param None + * @retval 8-bit value of the ID register + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDR); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/