mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/stm32f10x_can.h
- Revision:
- 52:a51c77007319
- Child:
- 70:c1fbde68b492
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/stm32f10x_can.h Mon Dec 02 11:30:05 2013 +0000 @@ -0,0 +1,697 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CAN firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CAN_H +#define __STM32F10x_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/** @defgroup CAN_Exported_Types + * @{ + */ + +#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ + ((PERIPH) == CAN2)) + +/** + * @brief CAN init structure definition + */ + +typedef struct +{ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of + @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of + @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit + Segment 2. + This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered + communication mode. This parameter can be set + either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off + management. This parameter can be set either + to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or + DISABLE. */ + + FunctionalState CAN_NART; /*!< Enable or disable the no-automatic + retransmission mode. This parameter can be + set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE + or DISABLE. */ + + FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE + or DISABLE. */ +} CAN_InitTypeDef; + +/** + * @brief CAN filter init structure definition + */ + +typedef struct +{ + uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/** + * @brief CAN Rx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /*!< Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/** + * @} + */ + +/** @defgroup CAN_Exported_Constants + * @{ + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ + +/** + * @} + */ + +/** @defgroup CAN_Mode + * @{ + */ + +#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ + ((MODE) == CAN_Mode_LoopBack)|| \ + ((MODE) == CAN_Mode_Silent) || \ + ((MODE) == CAN_Mode_Silent_LoopBack)) +/** + * @} + */ + + +/** + * @defgroup CAN_Operating_Mode + * @{ + */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ + + +#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ + ((MODE) == CAN_OperatingMode_Normal)|| \ + ((MODE) == CAN_OperatingMode_Sleep)) +/** + * @} + */ + +/** + * @defgroup CAN_Mode_Status + * @{ + */ + +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ + + +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width + * @{ + */ + +#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ + +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ + ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 + * @{ + */ + +#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ + +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 + * @{ + */ + +#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ + +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) + +/** + * @} + */ + +/** @defgroup CAN_clock_prescaler + * @{ + */ + +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) + +/** + * @} + */ + +/** @defgroup CAN_filter_number + * @{ + */ +#ifndef STM32F10X_CL + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) +#else + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup CAN_filter_mode + * @{ + */ + +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ + ((MODE) == CAN_FilterMode_IdList)) +/** + * @} + */ + +/** @defgroup CAN_filter_scale + * @{ + */ + +#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ + +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ + ((SCALE) == CAN_FilterScale_32bit)) + +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO + * @{ + */ + +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ + ((FIFO) == CAN_FilterFIFO1)) +/** + * @} + */ + +/** @defgroup Start_bank_filter_for_slave_CAN + * @{ + */ +#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) +/** + * @} + */ + +/** @defgroup CAN_Tx + * @{ + */ + +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) + +/** + * @} + */ + +/** @defgroup CAN_identifier_type + * @{ + */ + +#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ + ((IDTYPE) == CAN_Id_Extended)) +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request + * @{ + */ + +#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) + +/** + * @} + */ + +/** @defgroup CAN_transmit_constants + * @{ + */ + +#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ + +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants + * @{ + */ + +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ + +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) + +/** + * @} + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ + +/** + * @} + */ + +/** @defgroup CAN_wake_up_constants + * @{ + */ + +#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ + +/** + * @} + */ + +/** + * @defgroup CAN_Error_Code_constants + * @{ + */ + +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ + + +/** + * @} + */ + +/** @defgroup CAN_flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ +/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ + +#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ + ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ + ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ + ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_SLAK )) + +#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ + ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) +/** + * @} + */ + + +/** @defgroup CAN_interrupts + * @{ + */ + + + +#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + + +#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ + ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ + ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ + ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +/** + * @} + */ + +/** @defgroup CAN_Legacy + * @{ + */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +#define CANTXFAILE CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Functions + * @{ + */ +/* Function used to set the CAN configuration to the default reset state *****/ +void CAN_DeInit(CAN_TypeDef* CANx); + +/* Initialization and Configuration functions *********************************/ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); + +/* Transmit functions *********************************************************/ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); + +/* Receive functions **********************************************************/ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); + + +/* Operation modes functions **************************************************/ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef* CANx); +uint8_t CAN_WakeUp(CAN_TypeDef* CANx); + +/* Error management functions *************************************************/ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); + +/* Interrupts and flags management functions **********************************/ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CAN_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/