mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L053R8/stm32l0xx_hal_flash.h
- Revision:
- 181:a4cbdfbbd2f4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L053R8/stm32l0xx_hal_flash.h Wed May 07 13:15:08 2014 +0100 @@ -0,0 +1,503 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal_flash.h + * @author MCD Application Team + * @version V1.0.0 + * @date 22-April-2014 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L0XX_HAL_FLASH_H +#define __STM32L0XX_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l0xx_hal_def.h" + +/** @addtogroup STM32L0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** + * @brief FLASH Error structure definition + */ +typedef enum +{ + FLASH_ERROR_RD = 0x01, + FLASH_ERROR_ENDHV = 0x02, + FLASH_ERROR_SIZE = 0x04, + FLASH_ERROR_PGA = 0x08, + FLASH_ERROR_WRP = 0x10, + FLASH_ERROR_OPTV = 0x20, + FLASH_ERROR_NOTZERO = 0x40 +}FLASH_ErrorTypeDef; + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0, + FLASH_PROC_PAGEERASE, + FLASH_PROC_PROGRAM +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< TypeErase: Mass erase or sector Erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + + uint32_t Page; /*!< Sector: Initial FLASH sector to erase when Mass erase is disabled + This parameter must be a value of @ref FLASH_Sectors */ + + uint32_t NbPages; /*!< NbSectors: Number of sectors to be erased. + This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes PROGRAM structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured. + This parameter can be a value of @ref FLASH_Option_Type */ + + uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + This parameter can be a value of @ref FLASH_WRP_State */ + + uint32_t WRPSector; /*!< WRPSector: specifies the sector(s) to be write protected + The value of this parameter depend on device used within the same series */ + + uint32_t RDPLevel; /*!< RDPLevel: Set the read protection level.. + This parameter can be a value of @ref FLASH_Option_Bytes_Read_Protection */ + + uint32_t BORLevel; /*!< BORLevel: Set the BOR Level. + This parameter can be a value of @ref Option_Bytes_BOR_Level */ + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + This parameter can be a combination of @ref FLASH_Option_Bytes_IWatchdog, @ref FLASH_Option_Bytes_nRST_STOP and @ref FLASH_Option_Bytes_nRST_STDBY*/ +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ + + __IO uint32_t NbPagesToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ + + __IO uint32_t Page; /*Internal variable to define the current sector which is erasing*/ + + __IO uint32_t Address; /*Internal variable to save address selected for program*/ + + HAL_LockTypeDef Lock; /* FLASH locking object */ + + __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */ + +}FLASH_ProcessTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Type_Erase FLASH Type Erase + * @{ + */ +#define TYPEERASE_PAGEERASE ((uint32_t)0x00) /*!<Page erase only*/ +#define TYPEERASE_WORD ((uint32_t)0x01) /*!<Data erase word activation*/ + +#define IS_TYPEERASE(VALUE)(((VALUE) == TYPEERASE_PAGEERASE) || \ + ((VALUE) == TYPEERASE_WORD)) +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!<Program byte (8-bit) at a specified address.*/ +#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/ +#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/ +#define TYPEPROGRAM_FASTBYTE ((uint32_t)0x04) /*!<Fast Program byte (8-bit) at a specified address.*/ +#define TYPEPROGRAM_FASTHALFWORD ((uint32_t)0x08) /*!<Fast Program a half-word (16-bit) at a specified address.*/ +#define TYPEPROGRAM_FASTWORD ((uint32_t)0x10) /*!<Fast Program a word (32-bit) at a specified address.*/ + +#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \ + ((VALUE) == TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == TYPEPROGRAM_WORD) || \ + ((VALUE) == TYPEPROGRAM_FASTBYTE) || \ + ((VALUE) == TYPEPROGRAM_FASTHALFWORD) || \ + ((VALUE) == TYPEPROGRAM_FASTWORD)) +/** + * @} + */ + +/** @defgroup FLASH_WRP_State FLASH WRP State + * @{ + */ +#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired bank 1 sectors*/ +#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired bank 1 sectors*/ + +#define IS_WRPSTATE(VALUE)(((VALUE) == WRPSTATE_DISABLE) || \ + ((VALUE) == WRPSTATE_ENABLE)) +/** + * @} + */ + +/** @defgroup FLASH_Option_Type FLASH Option Type + * @{ + */ +#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/ +#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/ +#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/ +#define OPTIONBYTE_BOR ((uint32_t)0x08) /*!<BOR option byte configuration*/ + +#define IS_OPTIONBYTE(VALUE)(((VALUE) < (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR))) +/** + * @} + */ + +/** @defgroup FLASH_Interrupts + * @{ + */ +#define FLASH_IT_EOP FLASH_PECR_EOPIE /*!< End of programming interrupt source */ +#define FLASH_IT_ERR FLASH_PECR_ERRIE /*!< Error interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFCFFFF) == 0x00000000) && (((IT) != 0x00000000))) +/** + * @} + */ + +/** @defgroup FLASH_Address + * @{ + */ +#define IS_FLASH_DATA_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08080000) && ((ADDRESS) <= 0x080807FF)) /* 2K */ +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF)) /* 64K */ +#define IS_NBPAGES(PAGES) (((PAGES) >= 1) && ((PAGES) <= 512)) /* 512 pages from page0 to page 511 */ +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ +#define OB_WRP_Pages0to31 ((uint32_t)0x00000001) /* Write protection of Sector0 */ +#define OB_WRP_Pages32to63 ((uint32_t)0x00000002) /* Write protection of Sector1 */ +#define OB_WRP_Pages64to95 ((uint32_t)0x00000004) /* Write protection of Sector2 */ +#define OB_WRP_Pages96to127 ((uint32_t)0x00000008) /* Write protection of Sector3 */ +#define OB_WRP_Pages128to159 ((uint32_t)0x00000010) /* Write protection of Sector4 */ +#define OB_WRP_Pages160to191 ((uint32_t)0x00000020) /* Write protection of Sector5 */ +#define OB_WRP_Pages192to223 ((uint32_t)0x00000040) /* Write protection of Sector6 */ +#define OB_WRP_Pages224to255 ((uint32_t)0x00000080) /* Write protection of Sector7 */ +#define OB_WRP_Pages256to287 ((uint32_t)0x00000100) /* Write protection of Sector8 */ +#define OB_WRP_Pages288to319 ((uint32_t)0x00000200) /* Write protection of Sector9 */ +#define OB_WRP_Pages320to351 ((uint32_t)0x00000400) /* Write protection of Sector10 */ +#define OB_WRP_Pages352to383 ((uint32_t)0x00000800) /* Write protection of Sector11 */ +#define OB_WRP_Pages384to415 ((uint32_t)0x00001000) /* Write protection of Sector12 */ +#define OB_WRP_Pages416to447 ((uint32_t)0x00002000) /* Write protection of Sector13 */ +#define OB_WRP_Pages448to479 ((uint32_t)0x00004000) /* Write protection of Sector14 */ +#define OB_WRP_Pages480to511 ((uint32_t)0x00008000) /* Write protection of Sector15 */ + +#define OB_WRP_AllPages ((uint32_t)0x0000FFFF) /*!< Write protection of all Sectors */ + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000)) +/** + * @} + */ + +/** @defgroup Option_Bytes_Read_Protection + * @{ + */ + +/** + * @brief FLASH_Option_Bytes_Read_Protection + */ +#define OB_RDP_Level_0 ((uint8_t)0xAA) +#define OB_RDP_Level_1 ((uint8_t)0xBB) +/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /* Warning: When enabling read protection level 2 + it's no more possible to go back to level 1 or 0 */ + +#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\ + ((LEVEL) == OB_RDP_Level_1))/*||\ + ((LEVEL) == OB_RDP_Level_2))*/ +/** + * @} + */ + +/** @defgroup Option_Bytes_IWatchdog + * @{ + */ +#define OB_IWDG_SW ((uint8_t)0x10) /*!< Software WDG selected */ +#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware WDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STOP + * @{ + */ +#define OB_STOP_NoRST ((uint8_t)0x20) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STDBY + * @{ + */ +#define OB_STDBY_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) +/** + * @} + */ + +/** @defgroup Option_Bytes_BOR_Level + * @{ + */ + +#define OB_BOR_OFF ((uint8_t)0x00) /*!< BOR is disabled at power down, the reset is asserted when the VDD + power supply reaches the PDR(Power Down Reset) threshold (1.5V) */ +#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< BOR Reset threshold levels for 1.7V - 1.8V VDD power supply */ +#define OB_BOR_LEVEL2 ((uint8_t)0x09) /*!< BOR Reset threshold levels for 1.9V - 2.0V VDD power supply */ +#define OB_BOR_LEVEL3 ((uint8_t)0x0A) /*!< BOR Reset threshold levels for 2.3V - 2.4V VDD power supply */ +#define OB_BOR_LEVEL4 ((uint8_t)0x0B) /*!< BOR Reset threshold levels for 2.55V - 2.65V VDD power supply */ +#define OB_BOR_LEVEL5 ((uint8_t)0x0C) /*!< BOR Reset threshold levels for 2.8V - 2.9V VDD power supply */ + +#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_OFF) || \ + ((LEVEL) == OB_BOR_LEVEL1) || \ + ((LEVEL) == OB_BOR_LEVEL2) || \ + ((LEVEL) == OB_BOR_LEVEL3) || \ + ((LEVEL) == OB_BOR_LEVEL4) || \ + ((LEVEL) == OB_BOR_LEVEL5)) + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ + +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Programming flag */ +#define FLASH_FLAG_ENDHV FLASH_SR_ENHV /*!< FLASH End of High Voltage flag */ +#define FLASH_FLAG_READY FLASH_SR_READY /*!< FLASH Ready flag after low power mode */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ +#define FLASH_FLAG_SIZERR FLASH_SR_SIZERR /*!< FLASH Size error flag */ +#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option Validity error flag */ +#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protected error flag */ +#define FLASH_FLAG_NOTZEROERR FLASH_SR_NOTZEROERR /*!< FLASH Read protected error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFED0FF) == 0x00000000) && ((FLAG) != 0x00000000)) + +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_ENDHV) || ((FLAG) == FLASH_FLAG_READY ) || \ + ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR ) || \ + ((FLAG) == FLASH_FLAG_SIZERR) || ((FLAG) == FLASH_FLAG_OPTVERR) || \ + ((FLAG) == FLASH_FLAG_RDERR) || ((FLAG) == FLASH_FLAG_NOTZEROERR)) +/** + * @} + */ + +/** @defgroup FLASH_Keys + * @{ + */ + +#define FLASH_PDKEY1 ((uint32_t)0x04152637) /*!< Flash power down key1 */ +#define FLASH_PDKEY2 ((uint32_t)0xFAFBFCFD) /*!< Flash power down key2: used with FLASH_PDKEY1 + to unlock the RUN_PD bit in FLASH_ACR */ + +#define FLASH_PEKEY1 ((uint32_t)0x89ABCDEF) /*!< Flash program erase key1 */ +#define FLASH_PEKEY2 ((uint32_t)0x02030405) /*!< Flash program erase key: used with FLASH_PEKEY2 + to unlock the write access to the FLASH_PECR register and + data EEPROM */ + +#define FLASH_PRGKEY1 ((uint32_t)0x8C9DAEBF) /*!< Flash program memory key1 */ +#define FLASH_PRGKEY2 ((uint32_t)0x13141516) /*!< Flash program memory key2: used with FLASH_PRGKEY2 + to unlock the program memory */ + +#define FLASH_OPTKEY1 ((uint32_t)0xFBEAD9C8) /*!< Flash option key1 */ +#define FLASH_OPTKEY2 ((uint32_t)0x24252627) /*!< Flash option key2: used with FLASH_OPTKEY1 to + unlock the write access to the option byte block */ +/** + * @} + */ + +/** @defgroup CMSIS_Legacy + * @{ + */ +#if defined ( __ICCARM__ ) +#define InterruptType_ACTLR_DISMCYCINT_Msk IntType_ACTLR_DISMCYCINT_Msk +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FLASH_Interrupt FLASH Interrupt + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @param __INTERRUPT__: specifies the FLASH interrupt sources to be enabled or + * disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: FLASH end of programming Interrupt + * @arg FLASH_IT_ERR: FLASH Error Interrupt + * @retval None + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->PECR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_ERR: Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->PECR &= ~(uint32_t)(__INTERRUPT__)) + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @param __FLAG__: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_READY: FLASH Ready flag after low power mode + * @arg FLASH_FLAG_ENDHV: FLASH End of high voltage flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_SIZERR: FLASH size error flag + * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag + * @arg FLASH_FLAG_OPTVERRUSR: FLASH Option User validity error flag + * @arg FLASH_FLAG_RDERR: FLASH Read protected error flag + * @arg FLASH_FLAG_NOTZEROERR: Not Zero area error flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clears the FLASH's pending flags. + * @param __FLAG__: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_SIZERR: FLASH size error flag + * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag + * @arg FLASH_FLAG_OPTVERRUSR: FLASH Option User validity error flag + * @arg FLASH_FLAG_RDERR: FLASH Read protected error flag + * @arg FLASH_FLAG_NOTZEROERR: Not Zero area error flag + * @retval None + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) + +/** + * @} + */ + +/* Include FLASH HAL Extension module */ +#include "stm32l0xx_hal_flash_ex.h" +#include "stm32l0xx_hal_flash_ramfunc.h" + +/* Exported functions ------------------------------------------------------- */ + +/** + * @brief FLASH memory functions that can be executed from FLASH. + */ +/* Program operation functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data); + +/* FLASH IRQ handler function */ +void HAL_FLASH_IRQHandler(void); + +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); + +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); + +/* Peripheral State functions ************************************************/ +FLASH_ErrorTypeDef HAL_FLASH_GetError(void); + +/* Non-User functions ********************************************************/ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +void FLASH_Erase_Page(uint32_t Page_Address); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L0XX_HAL_FLASH_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/