Janek Mann
mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of
mbed-src
by 
mbed official
Diff: targets/hal/TARGET_NXP/TARGET_LPC43XX/PinNames.h
- Revision:
- 256:76fd9a263045
- Parent:
- 113:65a335a675de
--- a/targets/hal/TARGET_NXP/TARGET_LPC43XX/PinNames.h Fri Jul 11 10:00:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/PinNames.h Tue Jul 15 07:45:08 2014 +0100
@@ -435,7 +435,7 @@
SFP_CLK1 = MBED_PIN(0x18, 1, 0, 0),
SFP_CLK2 = MBED_PIN(0x18, 2, 0, 0),
SFP_CLK3 = MBED_PIN(0x18, 3, 0, 0),
-
+
// Group 0x19 : USB1, I2C0, ADC0, ADC1
SFP_USB1 = MBED_PIN(0x19, 0, 0, 0),
SFP_I2C0 = MBED_PIN(0x19, 1, 0, 0),
@@ -448,107 +448,245 @@
SFP_INS0 = MBED_PIN(0x1C, 0, 0, 0), // Interrupt select for pin interrupts 0 to 3
SFP_INS1 = MBED_PIN(0x1C, 1, 0, 0), // Interrupt select for pin interrupts 4 to 7
-#define MBED_ADC_NUM(MBED_PIN) ((MBED_PIN >> 5) & 0x0000000F)
-#define MBED_ADC_CHAN(MBED_PIN) (MBED_PIN & 0x0000001F)
+ // Dedicated pin (no GPIO)
+ P_DED = MBED_PIN(0, 0, NO_GPIO, 0),
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+ // ---------- Micromint Bambino 200/200E/210/210E (LQFP144) ----------
+ // Base headers - J8, J9, J10 on Bambino 210/210E
+ // n/p = not populated, n/a = not available
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ p15 = P7_4, // J8-1 J8-1 S4-3 S4-3
+ p16 = P7_5, // J8-2 J8-2 S4-4 S4-4
+ p17 = P4_1, // J8-3 J8-3 S3-4 S3-4
+ p18 = P7_7, // J8-4 J8-4 S4-5 S4-5
+ p19 = P4_3, // J8-5* J8-5* S3-4 S3-3
+ p20 = P4_4, // J8-6* J8-6* S1-5 S1-5
+ p20b = PF_8, // J8-6** J8-6** S3-5 S3-5
+ // (*) if p20 is configured as DAC, ADC is not available for p19
+ // (**) requires JP2 mod
+
+ p21 = P6_5, // J9-1 J9-1 S2-5 S2-5
+ p22 = P6_4, // J9-2 J9-2 S2=4 S2-4
+ p23 = P1_7, // J9-3 J9-3 S2-3 S2-3
+ p24 = P4_0, // J9-4 J9-4 S3-7 S3-7
+ p25 = P6_9, // J9-5 J9-5 S8-7 n/p
+ p26 = P5_5, // J9-6 J9-6 S3-8 S3-8
+ p27 = P5_7, // J9-7 J9-7 S3-9 S3-9
+ p28 = P7_6, // J9-8 J9-8 S4-6 S4-6
- // Use pseudo-pin ID also for ADCs, although with special handling
- SFP_ADC0_0 = MBED_PIN(0x19, 2, 0, 0), // ADC0_0
- SFP_ADC0_1 = MBED_PIN(0x19, 2, 0, 1), // ADC0_1
- SFP_ADC0_2 = MBED_PIN(0x19, 2, 0, 2), // ADC0_2
- SFP_ADC0_3 = MBED_PIN(0x19, 2, 0, 3), // ADC0_3
- SFP_ADC0_4 = MBED_PIN(0x19, 2, 0, 4), // ADC0_4
- SFP_ADC0_5 = MBED_PIN(0x19, 2, 0, 5), // ADC0_5
- SFP_ADC0_6 = MBED_PIN(0x19, 2, 0, 6), // ADC0_6
+ p29 = P6_12, // J10-1 J10-1 S10-3 n/p
+ p30 = P5_0, // J10-2 J10-2 S1-4 S1-4
+ p31 = P4_6, // J10-3 J10-3 S2-6 S2-6
+ p32 = P4_8, // J10-4 J10-4 S2-7 S2-7
+ p33 = P4_9, // J10-5 J10-5 S2-8 S2-8
+ p34 = P4_10, // J10-6 J10-6 S2-9 S2-9
+ p37 = P2_3, // J10-9 J10-9 S4-8 S4-8
+ p38 = P2_4, // J10-10 J10-10 S4-9 S4-9
- SFP_ADC1_0 = MBED_PIN(0x19, 3, 1, 0), // ADC1_0
- SFP_ADC1_1 = MBED_PIN(0x19, 3, 1, 1), // ADC1_1
- SFP_ADC1_2 = MBED_PIN(0x19, 3, 1, 2), // ADC1_2
- SFP_ADC1_3 = MBED_PIN(0x19, 3, 1, 3), // ADC1_3
- SFP_ADC1_4 = MBED_PIN(0x19, 3, 1, 4), // ADC1_4
- SFP_ADC1_5 = MBED_PIN(0x19, 3, 1, 5), // ADC1_5
- SFP_ADC1_6 = MBED_PIN(0x19, 3, 1, 6), // ADC1_6
- SFP_ADC1_7 = MBED_PIN(0x19, 3, 1, 7), // ADC1_7
+ // Extended headers - J11, J12, J13, J14 on Bambino 210E
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ p47 = P6_3, // J11-1 n/p S7-5 n/p
+ p48 = P6_6, // J11-2 n/p S6-7 n/p
+ p49 = P6_7, // J11-3 n/p S6-8 n/p
+ p50 = P6_8, // J11-4 n/p S6-9 n/p
+ p53 = P2_2, // J11-7 n/p S7-7 n/p
+ p54 = P2_1, // J11-8 n/p S7-3 n/p
+
+ p55 = PF_10, // J12-1 n/p n/a n/a
+ p56 = PF_7, // J12-2 n/p n/a n/a
+ p57 = P2_6, // J12-3 n/p S8-6 n/p
+ p58 = P2_8, // J12-4 n/p S8-3 n/p
+ p59 = P6_10, // J12-5 n/p S7-8 n/p
+ p60 = P2_9, // J12-6 n/p S9-3 n/p
+
+ p61 = P7_3, // J13-1 n/p S7-9 n/p
+ p62 = P3_2, // J13-2 n/p S9-4 n/p
+ p63 = P7_2, // J13-3 n/p S4-7 S4-7
+ p64 = P3_1, // J13-4 n/p S9-5 n/p
+ p65 = P7_1, // J13-5 n/p S9-8 n/p
+ p66 = P7_0, // J13-6 n/p S9-9 n/p
+ p67 = P4_2, // J13-7 n/p S4-6 S4-6
+ p68 = P4_5, // J13-8 n/p S1-3 S1-3
- // ---------- Micromint Bambino 200 ----------
- // LQFP144
- // NOTE: Pins marked (*) only available on 200E
- p5 = P1_2, // SPI0 mosi
- p6 = P1_1, // SPI0 miso
- p7 = P3_0, // SPI0 sck
- p8 = P4_5,
- p9 = P6_4, // Serial0 tx, I2C0 sda
- p10 = P6_5, // Serial0 rx, I2C0 scl
- p11 = P1_4, // SPI1 mosi (*)
- p12 = P1_3, // SPI1 miso (*)
- p13 = PF_4, // Serial1 tx, SPI1 sck (*)
- p14 = P1_14, // Serial1 rx
- p15 = P4_3, // ADC0
- p16 = P4_1, // ADC1
- p17 = P7_4, // ADC2
- p18 = SFP_ADC0_0, // ADC3, DAC0
- p19 = P7_5, // ADC4
- p20 = P7_7, // ADC5
- p21 = P4_0, // PWM0
- p22 = P5_5, // PWM1
- p23 = P5_7, // PWM2
- p24 = P4_8, // PWM3
- p25 = P4_9, // PWM4
- p26 = P4_10, // PWM5
- p27 = P2_4, // I2C1 scl, Serial2 rx
- p28 = P2_3, // I2C1 sda, Serial2 tx
- p29 = P3_2, // CAN0 td
- p30 = P3_1, // CAN0 rx
+ p69 = P2_13, // J14-1 n/p S9-7 n/p
+ p70 = P2_12, // J14-2 n/p S9-6 n/p
+ p71 = P9_6, // J14-3 n/p S6-6 n/p
+ p72 = P9_5, // J14-4 n/p S7-4 n/p
+ p73 = P5_3, // J14-5 n/p S6-5 n/p
+ p74 = P1_8, // J14-6 n/p S6-4 n/p
+ p75 = P1_5, // J14-7 n/p S10-6 n/p
+ p76 = P1_4, // J14-8 n/p S10-7 n/p
+ p77 = P1_3, // J14-9 n/p S10-8 n/p
+ p78 = PF_4, // J14-10 n/p S10-9 n/p
+
+ // J16 - PMOD-SSP header (not populated, field installable)
+ p80 = P1_0, // J16-1 J16-1 S1-6 S1-6
+ p81 = P1_2, // J16-2 J16-2 S1-7 S1-7
+ p82 = P1_1, // J16-3 J16-3 S1-8 S1-8
+ p83 = P3_0, // J16-4 J16-4 S1-9 S1-9
+
+ // Arduino pins - J8, J9, J10
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ D0 = p21, // J9-1 J9-1 S2-5 S2-5
+ D1 = p22, // J9-2 J9-2 S2-4 S2-4
+ D2 = p23, // J9-3 J9-3 S2-3 S2-3
+ D3 = p24, // J9-4 J9-4 S3-7 S3-7
+ D4 = p25, // J9-5 J9-5 S8-7 n/p
+ D5 = p26, // J9-6 J9-6 S3-8 S3-8
+ D6 = p27, // J9-7 J9-7 S3-9 S3-9
+ D7 = p28, // J9-8 J9-8 S4-6 S4-6
+
+ D8 = p29, // J10-1 J10-1 S10-1 n/p
+ D9 = p30, // J10-2 J10-2 S1-4 S1-4
+ D10 = p31, // J10-3 J10-3 S2-6 S2-6
+ D11 = p32, // J10-4 J10-4 S2-7 S2-7
+ D12 = p33, // J10-5 J10-5 S2-8 S2-8
+ D13 = p34, // J10-6 J10-6 S2-9 S2-9
+ D16 = p37, // J10-9 J10-9 S4-8 S4-8
+ D17 = p38, // J10-10 J10-10 S4-9 S4-9
+
+ A0 = p15, // J8-1 J8-1 S4-3 S4-3
+ A1 = p16, // J8-2 J8-2 S4-4 S4-4
+ A2 = p17, // J8-3 J8-3 S3-4 S3-4
+ A3 = p18, // J8-4 J8-4 S3-4 S3-4
+ A4 = p19, // J8-5* J8-5* S3-3 S3-3
+ A5 = p20, // J8-6* J8-6* S1-5 S1-5
+ A5b = p20b, // J8-6** J8-6** S3-5 S3-5
+ // (*) if A5 is configured as DAC, ADC is not available for A4
+ // (**) requires JP2 mod
+
+ // Extended Arduino pins - J11, J12, J13, J14
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ D20 = p61, // J13-1 n/p S7-9 n/p
+ D21 = p62, // J13-2 n/p S9-4 n/p
+ D22 = p63, // J13-3 n/p S4-7 S4-7
+ D23 = p64, // J13-4 n/p S9-5 n/p
+ D24 = p65, // J13-5 n/p S9-8 n/p
+ D25 = p66, // J13-6 n/p S9-9 n/p
+ D26 = p67, // J13-7 n/p S3-7 S3-7
+ D27 = p68, // J13-8 n/p S1-3 S1-3
+
+ D30 = p69, // J14-1 n/p S9-7 n/p
+ D31 = p70, // J14-2 n/p S9-6 n/p
+ D32 = p71, // J14-3 n/p S6-6 n/p
+ D33 = p72, // J14-4 n/p S7-4 n/p
+ D34 = p73, // J14-5 n/p S6-5 n/p
+ D35 = p74, // J14-6 n/p S6-4 n/p
+ D36 = p75, // J14-7 n/p S10-6 n/p
+ D37 = p76, // J14-8 n/p S10-7 n/p
+ D38 = p77, // J14-9 n/p S10-8 n/p
+ D39 = p78, // J14-10 n/p S10-9 n/p
+
+ D40 = p47, // J11-1 n/p S7-5 n/p
+ D41 = p48, // J11-2 n/p S6-7 n/p
+ D42 = p49, // J11-3 n/p S6-8 n/p
+ D43 = p50, // J11-4 n/p S6-9 n/p
+ D46 = p53, // J11-7 n/p S7-7 n/p
+ D47 = p54, // J11-8 n/p S7-3 n/p
+
+ D52 = p57, // J12-3 n/p S8-6 n/p
+ D53 = p58, // J12-4 n/p S8-3 n/p
+ D54 = p59, // J12-5 n/p S7-8 n/p
+ D55 = p60, // J12-6 n/p S9-3 n/p
+
+ A6 = p55, // J12-1 n/p n/a n/a
+ A7 = p56, // J12-2 n/p n/a n/a
// User interfaces: LEDs, buttons
- LED_YELLOW = P6_11,
- LED_GREEN = P2_5,
- LED_RED = LED_YELLOW,
- LED_BLUE = LED_GREEN,
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ LED1 = P6_11, // 210/210E/200e/200
+ LED2 = P2_5, // 210/210E/200e/200
+ LED3 = P6_1, // 210/210E only S6-3 n/p
+ LED4 = P6_2, // 210/210E only S7-6 n/p
- LED1 = LED_YELLOW,
- LED2 = LED_GREEN,
- LED3 = LED_GREEN,
- LED4 = LED_GREEN,
+ LED_YELLOW = LED1,
+ LED_GREEN = LED2,
+ LED_RED = LED3,
+ LED_BLUE = LED4,
BTN1 = P2_7,
- // Serial pins
- UART0_TX = P6_4,
- UART0_RX = P6_5,
- UART1_TX = P5_6,
- UART1_RX = P1_14,
- UART2_TX = P2_10,
- UART2_RX = P2_11,
- UART3_TX = P2_3,
- UART3_RX = P2_4,
+ // Serial pins - UART, SPI, I2C
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ UART0_TX = P6_4, // J9-2 J9-2 S2-4 S2-4
+ UART0_RX = P6_5, // J9-1 J9-1 S2-5 S2-5
+ UART1_TX = P5_6, // XBEE n/p S5-4/XBEE S5-4
+ UART1_RX = P1_14, // XBEE n/p S5-5/XBEE S5-5
+ UART2_TX = P2_10, // MBEDHDK MBEDHDK S10-4 n/p
+ UART2_RX = P2_11, // MBEDHDK MBEDHDK S10-5 n/p
+ UART3_TX = P2_3, // J10-9 n/p S4-8 S4-8
+ UART3_RX = P2_4, // J10-10 n/p S4-9 S4-9
+
+ COM1_TX = UART0_TX,
+ COM1_RX = UART0_RX,
+ COM2_TX = UART1_TX,
+ COM2_RX = UART1_RX,
+ COM3_TX = UART2_TX,
+ COM3_RX = UART2_RX,
+ COM4_TX = UART3_TX,
+ COM4_RX = UART3_RX,
+
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ SPI0_SCK = P3_0, // J16-4 n/p S1-9 S1-9
+ SPI0_MISO = P1_1, // J16-3 n/p S1-8 S1-8
+ SPI0_MOSI = P1_2, // J16-2 n/p S1-7 S1-7
+ SPI0_SSEL = P1_0, // J16-1 n/p S1-6 S1-6
+ SPI1_SCK = PF_4, // J14-10 n/p S10-9 n/p
+ SPI1_MISO = P1_3, // J14-9 n/p S10-8 n/p
+ SPI1_MOSI = P1_4, // J14-8 n/p S10-7 n/p
+ SPI1_SSEL = P1_5, // J14-7 n/p S10-6 n/p
+
+ I2C0_SDA = P_DED, // J15-3 J15-3 S8-8 n/p
+ I2C0_SCL = P_DED, // J15-1 J15-1 S8-9 n/p
+ I2C1_SDA = P2_3, // J10-9 J10-9 S4-8 S4-8
+ I2C1_SCL = P2_4, // J10-10 J10-10 S4-9 S4-9
// Analog pins
- P_ADC0_0 = P4_3,
- P_ADC0_1 = P4_1,
- P_ADC1_0 = SFP_ADC0_0,
- P_ADC0_4 = P7_4,
- P_ADC0_3 = P7_5,
- P_ADC1_6 = P7_7,
-
- P_ADC0 = P_ADC0_0,
- P_ADC1 = P_ADC0_1,
- P_ADC2 = P_ADC1_0,
- P_ADC3 = P_ADC0_4,
- P_ADC4 = P_ADC0_3,
- P_ADC5 = P_ADC1_6,
-
- P_DAC0 = P4_4,
+ ADC0 = P7_4, // J8-1 J8-1 S4-3 S4-3
+ ADC1 = P7_5, // J8-2 J8-2 S4-4 S4-4
+ ADC2 = P4_1, // J8-3 J8-3 S3-4 S3-4
+ ADC3 = P7_7, // J8-4 J8-4 S3-4 S3-4
+ ADC4 = P4_3, // J8-5* J8-5* S3-3 S3-3
+ ADC5 = PF_8, // J8-6** J8-6** S1-5 S1-5
+ ADC6 = PF_10, // J12-1 n/p n/a n/a
+ ADC7 = PF_7, // J12-2 n/p n/a n/a
+ DAC0 = P4_4, // J8-6* J8-6* S3-5 S3-5
+ // (*) if DAC0 is configured, ADC4 is not available
+ // (**) ADC5 requires JP2 mod
// USB pins
- //P_USB0_TX = SFP_USB1,
- //P_USB0_RX = SFP_USB1,
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ USBTX = UART2_TX, // MBEDHDK MBEDHDK S10-4 n/p
+ USBRX = UART2_RX, // MBEDHDK MBEDHDK S10-5 n/p
- USBTX = UART0_TX,
- USBRX = UART0_RX,
- // ---------- End of Micromint Bambino 200 ----------
+ // PWM pins
+ // 210E 210 200E 200
+ // ---- ---- ---- ----
+ PWM1 = P1_7, // J9-3 J9-3 S2-3 S2-3
+ PWM2 = P7_6, // J9-8 J9-8 S4-6 S4-6
+ PWM3 = P6_12, // J10-1 J10-1 S10-3 n/p
+ PWM4 = P4_6, // J10-3 J10-3 S2-6 S2-6
+ PWM5 = P7_5, // J8-2 J8-2 S4-4 S4-4
+ PWM6 = P4_1, // J8-3 J8-3 S3-4 S3-4
+ PWM7 = P7_7, // J8-4 J8-4 S4-5 S4-5
+ PWM8 = P2_8, // J12-4 n/p S8-3 n/p
+ PWM9 = P2_9, // J12-6 n/p S9-3 n/p
+ PWM10 = P7_1, // J13-5 n/p S9-8 n/p
+ PWM11 = P7_0, // J13-6 n/p S9-9 n/p
+ PWM12 = P1_5, // J14-7 n/p S10-6 n/p
- // Not connected
- NC = (int)0xFFFFFFFF
+ // ---------- End of Micromint Bambino ----------
} PinName;
typedef enum {