Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_flash_ex.c

Revision:

242:7074e42da0b2

Parent:

133:d4dda5c437f0

--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_flash_ex.c	Thu Jun 26 10:30:09 2014 +0100
+++ b/targets/cmsis/TARGET_STM/TARGET_DISCO_F407VG/stm32f4xx_hal_flash_ex.c	Fri Jun 27 07:30:09 2014 +0100
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_flash_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    18-February-2014
+  * @version V1.1.0RC2
+  * @date    14-May-2014
   * @brief   Extended FLASH HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the FLASH extension peripheral:
@@ -30,7 +30,7 @@
            (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
                 HAL_FLASH_Lock() functions
            (++) Erase function: Erase sector, erase all sectors
-           (++) There is two mode of erase :
+           (++) There are two modes of erase :
              (+++) Polling Mode using HAL_FLASHEx_Erase()
              (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
              
@@ -154,7 +154,7 @@
   *         contains the configuration information on faulty sector in case of error 
   *         (0xFFFFFFFF means that all the sectors have been correctly erased)
   * 
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
 {
@@ -224,7 +224,7 @@
   * @param  pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
   *         contains the configuration information for the erasing.
   * 
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
 {
@@ -277,7 +277,7 @@
   * @param  pOBInit: pointer to an FLASH_OBInitStruct structure that
   *         contains the configuration information for the programming.
   * 
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
 {
@@ -361,7 +361,7 @@
   * @param  pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
   *         contains the configuration information for the programming.
   * 
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
 {
@@ -440,7 +440,7 @@
   * @note   This function can be used only for STM32F427xx/STM32F429xx/STM32F437xx/STM32F439xx/STM32F401xx devices.     
   * 
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void)
 {
@@ -466,7 +466,7 @@
   * @note   This function can be used only for STM32F427xx/STM32F429xx/STM32F437xx/STM32F439xx/STM32F401xx devices.     
   * 
   * @param  None
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void)
 {
@@ -522,7 +522,7 @@
   *            @arg FLASH_BANK_2: Bank2 to be erased
   *            @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
   *
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
 {
@@ -801,7 +801,7 @@
   *            @arg FLASH_BANK_2: WRP on all sectors of bank2
   *            @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
   *
-  * @retval HAL_StatusTypeDef HAL Status  
+  * @retval HAL Status  
   */
 static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
 {
@@ -865,7 +865,7 @@
   *            @arg FLASH_BANK_2: WRP on all sectors of bank2
   *            @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
   *
-  * @retval HAL_StatusTypeDef HAL Status  
+  * @retval HAL Status  
   */
 static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
 {  
@@ -1014,7 +1014,7 @@
   *          This parameter can be one of the following values:
   *            @arg FLASH_BANK_1: WRP on all sectors of bank1
   *
-  * @retval HAL_StatusTypeDef HAL Status 
+  * @retval HAL Status 
   */
 static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
 {
@@ -1050,7 +1050,7 @@
   *          This parameter can be one of the following values:
   *            @arg FLASH_BANK_1: WRP on all sectors of bank1
   *
-  * @retval HAL_StatusTypeDef HAL Status 
+  * @retval HAL Status 
   */
 static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
 {
@@ -1080,7 +1080,7 @@
   *          This parameter can be one of the following values:
   *            @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
   *            @arg OB_PCROP_Sector_All                         
-  * @retval HAL_StatusTypeDef HAL Status  
+  * @retval HAL Status  
   */
 static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector)
 {
@@ -1108,7 +1108,7 @@
   *          This parameter can be one of the following values:
   *            @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
   *            @arg OB_PCROP_Sector_All                         
-  * @retval HAL_StatusTypeDef HAL Status  
+  * @retval HAL Status  
   */
 static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector)
 {  
@@ -1140,7 +1140,7 @@
   *   
   * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
   *    
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
 {
@@ -1174,7 +1174,7 @@
   *          This parameter  can be one of the following values:
   *            @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
   *            @arg OB_STDBY_RST: Reset generated when entering in STANDBY
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby)
 {
@@ -1210,7 +1210,7 @@
   *            @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
   *            @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
   *            @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
-  * @retval HAL_StatusTypeDef HAL Status
+  * @retval HAL Status
   */
 static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
 {