mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_sdmmc.h
- Revision:
- 87:085cde657901
- Child:
- 106:ced8cbb51063
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_sdmmc.h Sat Feb 08 19:45:06 2014 +0000 @@ -0,0 +1,940 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_sdmmc.h + * @author MCD Application Team + * @version V1.0.0RC2 + * @date 04-February-2014 + * @brief Header file of SDMMC HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_SDMMC_H +#define __STM32F4xx_LL_SDMMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_Driver + * @{ + */ + +/** @addtogroup SDMMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief SDMMC Configuration Structure definition + */ +typedef struct +{ + uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + +}SDIO_InitTypeDef; + + +/** + * @brief SDIO Command Control structure + */ +typedef struct +{ + uint32_t Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register. */ + + uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and + Max_Data = 64 */ + + uint32_t Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is + enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +}SDIO_CmdInitTypeDef; + + +/** + * @brief SDIO Data Control structure + */ +typedef struct +{ + uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +}SDIO_DataInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ +#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000) +#define SDIO_CLOCK_EDGE_FALLING ((uint32_t)0x00002000) + +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ + ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ +#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000) +#define SDIO_CLOCK_BYPASS_ENABLE ((uint32_t)0x00000400) + +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ + ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ +#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000) +#define SDIO_CLOCK_POWER_SAVE_ENABLE ((uint32_t)0x00000200) + +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ + ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ +#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000) +#define SDIO_BUS_WIDE_4B ((uint32_t)0x00000800) +#define SDIO_BUS_WIDE_8B ((uint32_t)0x00001000) + +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ + ((WIDE) == SDIO_BUS_WIDE_4B) || \ + ((WIDE) == SDIO_BUS_WIDE_8B)) +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ +#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000) +#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE ((uint32_t)0x00004000) + +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ + ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Division + * @{ + */ +#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ +#define SDIO_RESPONSE_NO ((uint32_t)0x00000000) +#define SDIO_RESPONSE_SHORT ((uint32_t)0x00000040) +#define SDIO_RESPONSE_LONG ((uint32_t)0x000000C0) + +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ + ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ + ((RESPONSE) == SDIO_RESPONSE_LONG)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ +#define SDIO_WAIT_NO ((uint32_t)0x00000000) +#define SDIO_WAIT_IT ((uint32_t)0x00000100) +#define SDIO_WAIT_PEND ((uint32_t)0x00000200) + +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ + ((WAIT) == SDIO_WAIT_IT) || \ + ((WAIT) == SDIO_WAIT_PEND)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ +#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000) +#define SDIO_CPSM_ENABLE ((uint32_t)0x00000400) + +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ + ((CPSM) == SDIO_CPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) + +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ + ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || \ + ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ +#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000) +#define SDIO_DATABLOCK_SIZE_2B ((uint32_t)0x00000010) +#define SDIO_DATABLOCK_SIZE_4B ((uint32_t)0x00000020) +#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030) +#define SDIO_DATABLOCK_SIZE_16B ((uint32_t)0x00000040) +#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050) +#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060) +#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070) +#define SDIO_DATABLOCK_SIZE_256B ((uint32_t)0x00000080) +#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090) +#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0) +#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0) +#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0) +#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0) +#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0) + +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ +#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000) +#define SDIO_TRANSFER_DIR_TO_SDIO ((uint32_t)0x00000002) + +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ + ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ +#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000) +#define SDIO_TRANSFER_MODE_STREAM ((uint32_t)0x00000004) + +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ + ((MODE) == SDIO_TRANSFER_MODE_STREAM)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ +#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000) +#define SDIO_DPSM_ENABLE ((uint32_t)0x00000001) + +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ + ((DPSM) == SDIO_DPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ +#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000000) +#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000001) + +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ + ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) +/** + * @} + */ + +/** @defgroup SDIO_Interrupt_sources + * @{ + */ +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) + +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) + +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + + +/** @defgroup SDIO_Instance_definition + * @{ + */ +#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* ------------ SDIO registers bit address in the alias region -------------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) +#define CLKEN_BitNumber 0x08 +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) + +/* --- CMD Register ---*/ +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0C) +#define SDIOSUSPEND_BitNumber 0x0B +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BitNumber 0x0C +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) + +/* Alias word address of NIEN bit */ +#define NIEN_BitNumber 0x0D +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BitNumber 0x0E +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) + +/* --- DCTRL Register ---*/ +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) +#define DMAEN_BitNumber 0x03 +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BitNumber 0x08 +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BitNumber 0x09 +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BitNumber 0x0A +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BitNumber 0x0B +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) + +/* ---------------------- SDIO registers bit mask --------------------------- */ +/* --- CLKCR Register ---*/ +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) + +/* --- PWRCTRL Register ---*/ +/* SDIO PWRCTRL Mask */ +#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) + +/* --- DCTRL Register ---*/ +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) + +/* --- CMD Register ---*/ +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) + +/* SDIO RESP Registers Address */ +#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) + +/* SD FLASH SDIO Interface */ +#define SDIO_FIFO_ADDRESS ((uint32_t)0x40012C80) + +/* SDIO Intialization Frequency (400KHz max) */ +#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) + +/* SDIO Data Transfer Frequency (25MHz max) */ +#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) + +/** @defgroup SDIO_Interrupt_Clock + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the SDIO device. + * @param None + * @retval None + */ +#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) + +/** + * @brief Disable the SDIO device. + * @param None + * @retval None + */ +#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) + +/** + * @brief Enable the SDIO DMA transfer. + * @param None + * @retval None + */ +#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) + +/** + * @brief Disable the SDIO DMA transfer. + * @param None + * @retval None + */ +#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) + +/** + * @brief Enable the SDIO device interrupt. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval None + */ +#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) + +/** + * @brief Disable the SDIO device interrupt. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval None + */ +#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) + + +/** + * @brief Clears the SDIO's pending flags. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param None + * @retval None + */ +#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) + +/** + * @brief Disable Start the SD I/O Read Wait operations. + * @param None + * @retval None + */ +#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param None + * @retval None + */ +#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) + +/** + * @brief Disable Stop the SD I/O Read Wait operations. + * @param None + * @retval None + */ +#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) + +/** + * @brief Enable the SD I/O Mode Operation. + * @param None + * @retval None + */ +#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) + +/** + * @brief Disable the SD I/O Mode Operation. + * @param None + * @retval None + */ +#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) + +/** + * @brief Enable the SD I/O Suspend command sending. + * @param None + * @retval None + */ +#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) + +/** + * @brief Disable the SD I/O Suspend command sending. + * @param None + * @retval None + */ +#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) + +/** + * @brief Enable the command completion signal. + * @param None + * @retval None + */ +#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) + +/** + * @brief Disable the command completion signal. + * @param None + * @retval None + */ +#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) + +/** + * @brief Enable the CE-ATA interrupt. + * @param None + * @retval None + */ +#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0) + +/** + * @brief Disable the CE-ATA interrupt. + * @param None + * @retval None + */ +#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1) + +/** + * @brief Enable send CE-ATA command (CMD61). + * @param None + * @retval None + */ +#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) + +/** + * @brief Disable send CE-ATA command (CMD61). + * @param None + * @retval None + */ +#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); + +/* I/O operation functions *****************************************************/ +/* Blocking mode: Polling */ +uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); +HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); +HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); + +/* Command path state machine (CPSM) management functions */ +HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); + +/* Data path state machine (DPSM) management functions */ +HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); + +/* SDIO IO Cards mode management functions */ +HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_SDMMC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/