mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/hal/TARGET_NXP/TARGET_LPC23XX/serial_api.c
- Revision:
- 13:0645d8841f51
- Child:
- 20:4263a77256ae
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/serial_api.c Mon Aug 05 14:12:34 2013 +0300 @@ -0,0 +1,318 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +// math.h required for floating point operations for baud rate calculation +#include <math.h> +#include <string.h> + +#include "serial_api.h" +#include "cmsis.h" +#include "pinmap.h" +#include "error.h" + +/****************************************************************************** + * INITIALIZATION + ******************************************************************************/ +#define UART_NUM 4 + +static const PinMap PinMap_UART_TX[] = { + {P0_0, UART_3, 2}, + {P0_2, UART_0, 1}, + {P0_10, UART_2, 1}, + {P0_15, UART_1, 1}, + {P0_25, UART_3, 3}, + {P2_0 , UART_1, 2}, + {P2_8 , UART_2, 2}, + {P4_28, UART_3, 3}, + {NC , NC , 0} +}; + +static const PinMap PinMap_UART_RX[] = { + {P0_1 , UART_3, 2}, + {P0_3 , UART_0, 1}, + {P0_11, UART_2, 1}, + {P0_16, UART_1, 1}, + {P0_26, UART_3, 3}, + {P2_1 , UART_1, 2}, + {P2_9 , UART_2, 2}, + {P4_29, UART_3, 3}, + {NC , NC , 0} +}; + +static uint32_t serial_irq_ids[UART_NUM] = {0}; +static uart_irq_handler irq_handler; + +int stdio_uart_inited = 0; +serial_t stdio_uart; + +void serial_init(serial_t *obj, PinName tx, PinName rx) { + int is_stdio_uart = 0; + + // determine the UART to use + UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX); + UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX); + UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx); + if ((int)uart == NC) { + error("Serial pinout mapping failed"); + } + + obj->uart = (LPC_UART_TypeDef *)uart; + // enable power + switch (uart) { + case UART_0: LPC_SC->PCONP |= 1 << 3; break; + case UART_1: LPC_SC->PCONP |= 1 << 4; break; + case UART_2: LPC_SC->PCONP |= 1 << 24; break; + case UART_3: LPC_SC->PCONP |= 1 << 25; break; + } + + // enable fifos and default rx trigger level + obj->uart->FCR = 1 << 0 // FIFO Enable - 0 = Disables, 1 = Enabled + | 0 << 1 // Rx Fifo Reset + | 0 << 2 // Tx Fifo Reset + | 0 << 6; // Rx irq trigger level - 0 = 1 char, 1 = 4 chars, 2 = 8 chars, 3 = 14 chars + + // disable irqs + obj->uart->IER = 0 << 0 // Rx Data available irq enable + | 0 << 1 // Tx Fifo empty irq enable + | 0 << 2; // Rx Line Status irq enable + + // set default baud rate and format + serial_baud (obj, 9600); + serial_format(obj, 8, ParityNone, 1); + + // pinout the chosen uart + pinmap_pinout(tx, PinMap_UART_TX); + pinmap_pinout(rx, PinMap_UART_RX); + + // set rx/tx pins in PullUp mode + pin_mode(tx, PullUp); + pin_mode(rx, PullUp); + + switch (uart) { + case UART_0: obj->index = 0; break; + case UART_1: obj->index = 1; break; + case UART_2: obj->index = 2; break; + case UART_3: obj->index = 3; break; + } + + is_stdio_uart = (uart == STDIO_UART) ? (1) : (0); + + if (is_stdio_uart) { + stdio_uart_inited = 1; + memcpy(&stdio_uart, obj, sizeof(serial_t)); + } +} + +void serial_free(serial_t *obj) { + serial_irq_ids[obj->index] = 0; +} + +// serial_baud +// set the baud rate, taking in to account the current SystemFrequency +void serial_baud(serial_t *obj, int baudrate) { + // The LPC2300 and LPC1700 have a divider and a fractional divider to control the + // baud rate. The formula is: + // + // Baudrate = (1 / PCLK) * 16 * DL * (1 + DivAddVal / MulVal) + // where: + // 1 < MulVal <= 15 + // 0 <= DivAddVal < 14 + // DivAddVal < MulVal + // + // set pclk to /1 + switch ((int)obj->uart) { + case UART_0: LPC_SC->PCLKSEL0 &= ~(0x3 << 6); LPC_SC->PCLKSEL0 |= (0x1 << 6); break; + case UART_1: LPC_SC->PCLKSEL0 &= ~(0x3 << 8); LPC_SC->PCLKSEL0 |= (0x1 << 8); break; + case UART_2: LPC_SC->PCLKSEL1 &= ~(0x3 << 16); LPC_SC->PCLKSEL1 |= (0x1 << 16); break; + case UART_3: LPC_SC->PCLKSEL1 &= ~(0x3 << 18); LPC_SC->PCLKSEL1 |= (0x1 << 18); break; + default: error("serial_baud"); break; + } + + uint32_t PCLK = SystemCoreClock; + + // First we check to see if the basic divide with no DivAddVal/MulVal + // ratio gives us an integer result. If it does, we set DivAddVal = 0, + // MulVal = 1. Otherwise, we search the valid ratio value range to find + // the closest match. This could be more elegant, using search methods + // and/or lookup tables, but the brute force method is not that much + // slower, and is more maintainable. + uint16_t DL = PCLK / (16 * baudrate); + + uint8_t DivAddVal = 0; + uint8_t MulVal = 1; + int hit = 0; + uint16_t dlv; + uint8_t mv, dav; + if ((PCLK % (16 * baudrate)) != 0) { // Checking for zero remainder + float err_best = (float) baudrate; + uint16_t dlmax = DL; + for ( dlv = (dlmax/2); (dlv <= dlmax) && !hit; dlv++) { + for ( mv = 1; mv <= 15; mv++) { + for ( dav = 1; dav < mv; dav++) { + float ratio = 1.0f + ((float) dav / (float) mv); + float calcbaud = (float)PCLK / (16.0f * (float) dlv * ratio); + float err = fabs(((float) baudrate - calcbaud) / (float) baudrate); + if (err < err_best) { + DL = dlv; + DivAddVal = dav; + MulVal = mv; + err_best = err; + if (err < 0.001f) { + hit = 1; + } + } + } + } + } + } + + // set LCR[DLAB] to enable writing to divider registers + obj->uart->LCR |= (1 << 7); + + // set divider values + obj->uart->DLM = (DL >> 8) & 0xFF; + obj->uart->DLL = (DL >> 0) & 0xFF; + obj->uart->FDR = (uint32_t) DivAddVal << 0 + | (uint32_t) MulVal << 4; + + // clear LCR[DLAB] + obj->uart->LCR &= ~(1 << 7); +} + +void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) { + // 0: 1 stop bits, 1: 2 stop bits + if (stop_bits != 1 && stop_bits != 2) { + error("Invalid stop bits specified"); + } + stop_bits -= 1; + + // 0: 5 data bits ... 3: 8 data bits + if (data_bits < 5 || data_bits > 8) { + error("Invalid number of bits (%d) in serial format, should be 5..8", data_bits); + } + data_bits -= 5; + + int parity_enable, parity_select; + switch (parity) { + case ParityNone: parity_enable = 0; parity_select = 0; break; + case ParityOdd : parity_enable = 1; parity_select = 0; break; + case ParityEven: parity_enable = 1; parity_select = 1; break; + case ParityForced1: parity_enable = 1; parity_select = 2; break; + case ParityForced0: parity_enable = 1; parity_select = 3; break; + default: + error("Invalid serial parity setting"); + return; + } + + obj->uart->LCR = data_bits << 0 + | stop_bits << 2 + | parity_enable << 3 + | parity_select << 4; +} + +/****************************************************************************** + * INTERRUPTS HANDLING + ******************************************************************************/ +static inline void uart_irq(uint32_t iir, uint32_t index) { + // [Chapter 14] LPC17xx UART0/2/3: UARTn Interrupt Handling + SerialIrq irq_type; + switch (iir) { + case 1: irq_type = TxIrq; break; + case 2: irq_type = RxIrq; break; + default: return; + } + + if (serial_irq_ids[index] != 0) + irq_handler(serial_irq_ids[index], irq_type); +} + +void uart0_irq() {uart_irq((LPC_UART0->IIR >> 1) & 0x7, 0);} +void uart1_irq() {uart_irq((LPC_UART1->IIR >> 1) & 0x7, 1);} +void uart2_irq() {uart_irq((LPC_UART2->IIR >> 1) & 0x7, 2);} +void uart3_irq() {uart_irq((LPC_UART3->IIR >> 1) & 0x7, 3);} + +void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) { + irq_handler = handler; + serial_irq_ids[obj->index] = id; +} + +void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) { + IRQn_Type irq_n = (IRQn_Type)0; + uint32_t vector = 0; + switch ((int)obj->uart) { + case UART_0: irq_n=UART0_IRQn; vector = (uint32_t)&uart0_irq; break; + case UART_1: irq_n=UART1_IRQn; vector = (uint32_t)&uart1_irq; break; + case UART_2: irq_n=UART2_IRQn; vector = (uint32_t)&uart2_irq; break; + case UART_3: irq_n=UART3_IRQn; vector = (uint32_t)&uart3_irq; break; + } + + if (enable) { + obj->uart->IER |= 1 << irq; + NVIC_SetVector(irq_n, vector); + NVIC_EnableIRQ(irq_n); + } else { // disable + int all_disabled = 0; + SerialIrq other_irq = (irq == RxIrq) ? (TxIrq) : (RxIrq); + obj->uart->IER &= ~(1 << irq); + all_disabled = (obj->uart->IER & (1 << other_irq)) == 0; + if (all_disabled) + NVIC_DisableIRQ(irq_n); + } +} + +/****************************************************************************** + * READ/WRITE + ******************************************************************************/ +int serial_getc(serial_t *obj) { + while (!serial_readable(obj)); + return obj->uart->RBR; +} + +void serial_putc(serial_t *obj, int c) { + while (!serial_writable(obj)); + obj->uart->THR = c; + + uint32_t lsr = obj->uart->LSR; + lsr = lsr; + uint32_t thr = obj->uart->THR; + thr = thr; +} + +int serial_readable(serial_t *obj) { + return obj->uart->LSR & 0x01; +} + +int serial_writable(serial_t *obj) { + return obj->uart->LSR & 0x20; +} + +void serial_clear(serial_t *obj) { + obj->uart->FCR = 1 << 1 // rx FIFO reset + | 1 << 2 // tx FIFO reset + | 0 << 6; // interrupt depth +} + +void serial_pinout_tx(PinName tx) { + pinmap_pinout(tx, PinMap_UART_TX); +} + +void serial_break_set(serial_t *obj) { + obj->uart->LCR |= (1 << 6); +} + +void serial_break_clear(serial_t *obj) { + obj->uart->LCR &= ~(1 << 6); +} +