mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
Diff: targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h
- Revision:
- 13:0645d8841f51
- Child:
- 113:65a335a675de
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h Mon Aug 05 14:12:34 2013 +0300 @@ -0,0 +1,150 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 5 + +typedef enum { + // LPC1347 Pin Names + P0_0 = 0, + P0_1 = 1, + P0_2 = 2, + P0_3 = 3, + P0_4 = 4, + P0_5 = 5, + P0_6 = 6, + P0_7 = 7, + P0_8 = 8, + P0_9 = 9, + P0_10 = 10, + P0_11 = 11, + P0_12 = 12, + P0_13 = 13, + P0_14 = 14, + P0_15 = 15, + P0_16 = 16, + P0_17 = 17, + P0_18 = 18, + P0_19 = 19, + P0_20 = 20, + P0_21 = 21, + P0_22 = 22, + P0_23 = 23, + + P1_13 = 45, + P1_14 = 46, + P1_15 = 47, + P1_16 = 48, + + P1_19 = 51, + P1_20 = 52, + P1_21 = 53, + P1_22 = 54, + P1_23 = 55, + P1_24 = 56, + P1_25 = 57, + P1_26 = 58, + P1_27 = 59, + P1_28 = 60, + P1_29 = 61, + + P1_31 = 63, + + // DIP Pin Names + p1 = P0_0, + p2 = P0_11, + p3 = P0_12, + p4 = P0_13, + p5 = P0_14, + p6 = P1_31, + p8 = P0_16, + p9 = P0_22, + p10 = P0_23, + p13 = P1_29, + p14 = P1_21, + p15 = P0_8, + p16 = P0_9, + p17 = P1_24, + p18 = P0_4, + p19 = P1_13, + p20 = P1_14, + p21 = P1_22, + p22 = P0_17, + p23 = P0_5, + p24 = P0_21, + p25 = P0_19, + p26 = P0_18, + p27 = P1_15, + p28 = P1_16, + p29 = P1_25, + p30 = P1_19, + p33 = P0_20, + p34 = P0_2, + p35 = P1_26, + p36 = P1_27, + p37 = P1_20, + p38 = P1_23, + p39 = P0_7, + p40 = P1_28, + + UART_TX = P0_19, + UART_RX = P0_18, + + // Not connected + NC = (int)0xFFFFFFFF, + + LED1 = p21, + LED2 = p21, + LED3 = p21, + LED4 = p21 +} PinName; + +typedef enum { + CHANNEL0 = PIN_INT0_IRQn, + CHANNEL1 = PIN_INT1_IRQn, + CHANNEL2 = PIN_INT2_IRQn, + CHANNEL3 = PIN_INT3_IRQn, + CHANNEL4 = PIN_INT4_IRQn, + CHANNEL5 = PIN_INT5_IRQn, + CHANNEL6 = PIN_INT6_IRQn, + CHANNEL7 = PIN_INT7_IRQn +} Channel; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4 +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif