mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of mbed-src by
targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/serial_api.c@140:ca60b7a31055, 2014-04-01 (annotated)
- Committer:
- mbed_official
- Date:
- Tue Apr 01 10:00:07 2014 +0100
- Revision:
- 140:ca60b7a31055
- Parent:
- 51:7838415c99e7
- Child:
- 227:7bd0639b8911
Synchronized with git revision fdcc1e387426ce216bc17175b73bcd5f4aececff
Full URL: https://github.com/mbedmicro/mbed/commit/fdcc1e387426ce216bc17175b73bcd5f4aececff/
Changed error(...) to a weak function
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 30:91c1d09ada54 | 1 | /* mbed Microcontroller Library |
mbed_official | 30:91c1d09ada54 | 2 | * Copyright (c) 2006-2013 ARM Limited |
mbed_official | 30:91c1d09ada54 | 3 | * |
mbed_official | 30:91c1d09ada54 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
mbed_official | 30:91c1d09ada54 | 5 | * you may not use this file except in compliance with the License. |
mbed_official | 30:91c1d09ada54 | 6 | * You may obtain a copy of the License at |
mbed_official | 30:91c1d09ada54 | 7 | * |
mbed_official | 30:91c1d09ada54 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
mbed_official | 30:91c1d09ada54 | 9 | * |
mbed_official | 30:91c1d09ada54 | 10 | * Unless required by applicable law or agreed to in writing, software |
mbed_official | 30:91c1d09ada54 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
mbed_official | 30:91c1d09ada54 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
mbed_official | 30:91c1d09ada54 | 13 | * See the License for the specific language governing permissions and |
mbed_official | 30:91c1d09ada54 | 14 | * limitations under the License. |
mbed_official | 30:91c1d09ada54 | 15 | */ |
mbed_official | 30:91c1d09ada54 | 16 | // math.h required for floating point operations for baud rate calculation |
mbed_official | 30:91c1d09ada54 | 17 | #include <math.h> |
mbed_official | 30:91c1d09ada54 | 18 | #include <string.h> |
mbed_official | 140:ca60b7a31055 | 19 | #include <stdlib.h> |
mbed_official | 30:91c1d09ada54 | 20 | |
mbed_official | 30:91c1d09ada54 | 21 | #include "serial_api.h" |
mbed_official | 30:91c1d09ada54 | 22 | #include "cmsis.h" |
mbed_official | 30:91c1d09ada54 | 23 | #include "pinmap.h" |
mbed_official | 30:91c1d09ada54 | 24 | #include "error.h" |
mbed_official | 30:91c1d09ada54 | 25 | |
mbed_official | 30:91c1d09ada54 | 26 | /****************************************************************************** |
mbed_official | 30:91c1d09ada54 | 27 | * INITIALIZATION |
mbed_official | 30:91c1d09ada54 | 28 | ******************************************************************************/ |
mbed_official | 30:91c1d09ada54 | 29 | #define UART_NUM 1 |
mbed_official | 30:91c1d09ada54 | 30 | |
mbed_official | 30:91c1d09ada54 | 31 | static const PinMap PinMap_UART_TX[] = { |
mbed_official | 30:91c1d09ada54 | 32 | {P2_8 , UART_0, 0x02}, |
mbed_official | 30:91c1d09ada54 | 33 | {P3_5 , UART_0, 0x02}, |
mbed_official | 30:91c1d09ada54 | 34 | {P3_0 , UART_0, 0x03}, |
mbed_official | 30:91c1d09ada54 | 35 | {P1_7 , UART_0, 0x01}, |
mbed_official | 30:91c1d09ada54 | 36 | {NC , NC , 0x00} |
mbed_official | 30:91c1d09ada54 | 37 | }; |
mbed_official | 30:91c1d09ada54 | 38 | |
mbed_official | 30:91c1d09ada54 | 39 | static const PinMap PinMap_UART_RX[] = { |
mbed_official | 30:91c1d09ada54 | 40 | {P2_7 , UART_0, 0x02}, |
mbed_official | 30:91c1d09ada54 | 41 | {P3_4 , UART_0, 0x02}, |
mbed_official | 30:91c1d09ada54 | 42 | {P3_1 , UART_0, 0x03}, |
mbed_official | 30:91c1d09ada54 | 43 | {P1_6 , UART_0, 0x01}, |
mbed_official | 30:91c1d09ada54 | 44 | {NC , NC , 0x00} |
mbed_official | 30:91c1d09ada54 | 45 | }; |
mbed_official | 30:91c1d09ada54 | 46 | |
mbed_official | 30:91c1d09ada54 | 47 | static uint32_t serial_irq_ids[UART_NUM] = {0}; |
mbed_official | 30:91c1d09ada54 | 48 | static uart_irq_handler irq_handler; |
mbed_official | 30:91c1d09ada54 | 49 | |
mbed_official | 30:91c1d09ada54 | 50 | int stdio_uart_inited = 0; |
mbed_official | 30:91c1d09ada54 | 51 | serial_t stdio_uart; |
mbed_official | 30:91c1d09ada54 | 52 | |
mbed_official | 30:91c1d09ada54 | 53 | void serial_init(serial_t *obj, PinName tx, PinName rx) { |
mbed_official | 30:91c1d09ada54 | 54 | int is_stdio_uart = 0; |
mbed_official | 30:91c1d09ada54 | 55 | |
mbed_official | 30:91c1d09ada54 | 56 | // determine the UART to use |
mbed_official | 30:91c1d09ada54 | 57 | UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX); |
mbed_official | 30:91c1d09ada54 | 58 | UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX); |
mbed_official | 30:91c1d09ada54 | 59 | UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx); |
mbed_official | 30:91c1d09ada54 | 60 | if ((int)uart == NC) { |
mbed_official | 30:91c1d09ada54 | 61 | error("Serial pinout mapping failed"); |
mbed_official | 30:91c1d09ada54 | 62 | } |
mbed_official | 30:91c1d09ada54 | 63 | |
mbed_official | 30:91c1d09ada54 | 64 | obj->uart = (LPC_UART_TypeDef *)uart; |
mbed_official | 30:91c1d09ada54 | 65 | LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12); |
mbed_official | 30:91c1d09ada54 | 66 | |
mbed_official | 30:91c1d09ada54 | 67 | // enable fifos and default rx trigger level |
mbed_official | 30:91c1d09ada54 | 68 | obj->uart->FCR = 1 << 0 // FIFO Enable - 0 = Disables, 1 = Enabled |
mbed_official | 30:91c1d09ada54 | 69 | | 0 << 1 // Rx Fifo Reset |
mbed_official | 30:91c1d09ada54 | 70 | | 0 << 2 // Tx Fifo Reset |
mbed_official | 30:91c1d09ada54 | 71 | | 0 << 6; // Rx irq trigger level - 0 = 1 char, 1 = 4 chars, 2 = 8 chars, 3 = 14 chars |
mbed_official | 30:91c1d09ada54 | 72 | |
mbed_official | 30:91c1d09ada54 | 73 | // disable irqs |
mbed_official | 30:91c1d09ada54 | 74 | obj->uart->IER = 0 << 0 // Rx Data available irq enable |
mbed_official | 30:91c1d09ada54 | 75 | | 0 << 1 // Tx Fifo empty irq enable |
mbed_official | 30:91c1d09ada54 | 76 | | 0 << 2; // Rx Line Status irq enable |
mbed_official | 30:91c1d09ada54 | 77 | |
mbed_official | 30:91c1d09ada54 | 78 | // set default baud rate and format |
mbed_official | 30:91c1d09ada54 | 79 | serial_baud (obj, 9600); |
mbed_official | 30:91c1d09ada54 | 80 | serial_format(obj, 8, ParityNone, 1); |
mbed_official | 30:91c1d09ada54 | 81 | |
mbed_official | 30:91c1d09ada54 | 82 | // pinout the chosen uart |
mbed_official | 30:91c1d09ada54 | 83 | pinmap_pinout(tx, PinMap_UART_TX); |
mbed_official | 30:91c1d09ada54 | 84 | pinmap_pinout(rx, PinMap_UART_RX); |
mbed_official | 30:91c1d09ada54 | 85 | |
mbed_official | 30:91c1d09ada54 | 86 | // set rx/tx pins in PullUp mode |
mbed_official | 30:91c1d09ada54 | 87 | pin_mode(tx, PullUp); |
mbed_official | 30:91c1d09ada54 | 88 | pin_mode(rx, PullUp); |
mbed_official | 30:91c1d09ada54 | 89 | |
mbed_official | 30:91c1d09ada54 | 90 | switch (uart) { |
mbed_official | 30:91c1d09ada54 | 91 | case UART_0: obj->index = 0; break; |
mbed_official | 30:91c1d09ada54 | 92 | } |
mbed_official | 30:91c1d09ada54 | 93 | |
mbed_official | 30:91c1d09ada54 | 94 | is_stdio_uart = (uart == STDIO_UART) ? (1) : (0); |
mbed_official | 30:91c1d09ada54 | 95 | |
mbed_official | 30:91c1d09ada54 | 96 | if (is_stdio_uart) { |
mbed_official | 30:91c1d09ada54 | 97 | stdio_uart_inited = 1; |
mbed_official | 30:91c1d09ada54 | 98 | memcpy(&stdio_uart, obj, sizeof(serial_t)); |
mbed_official | 30:91c1d09ada54 | 99 | } |
mbed_official | 30:91c1d09ada54 | 100 | } |
mbed_official | 30:91c1d09ada54 | 101 | |
mbed_official | 30:91c1d09ada54 | 102 | void serial_free(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 103 | serial_irq_ids[obj->index] = 0; |
mbed_official | 30:91c1d09ada54 | 104 | } |
mbed_official | 30:91c1d09ada54 | 105 | |
mbed_official | 30:91c1d09ada54 | 106 | // serial_baud |
mbed_official | 30:91c1d09ada54 | 107 | // set the baud rate, taking in to account the current SystemFrequency |
mbed_official | 30:91c1d09ada54 | 108 | void serial_baud(serial_t *obj, int baudrate) { |
mbed_official | 30:91c1d09ada54 | 109 | LPC_SYSCON->UARTCLKDIV = 0x1; |
mbed_official | 30:91c1d09ada54 | 110 | uint32_t PCLK = SystemCoreClock; |
mbed_official | 30:91c1d09ada54 | 111 | // First we check to see if the basic divide with no DivAddVal/MulVal |
mbed_official | 30:91c1d09ada54 | 112 | // ratio gives us an integer result. If it does, we set DivAddVal = 0, |
mbed_official | 30:91c1d09ada54 | 113 | // MulVal = 1. Otherwise, we search the valid ratio value range to find |
mbed_official | 30:91c1d09ada54 | 114 | // the closest match. This could be more elegant, using search methods |
mbed_official | 30:91c1d09ada54 | 115 | // and/or lookup tables, but the brute force method is not that much |
mbed_official | 30:91c1d09ada54 | 116 | // slower, and is more maintainable. |
mbed_official | 30:91c1d09ada54 | 117 | uint16_t DL = PCLK / (16 * baudrate); |
mbed_official | 30:91c1d09ada54 | 118 | |
mbed_official | 30:91c1d09ada54 | 119 | uint8_t DivAddVal = 0; |
mbed_official | 30:91c1d09ada54 | 120 | uint8_t MulVal = 1; |
mbed_official | 30:91c1d09ada54 | 121 | int hit = 0; |
mbed_official | 30:91c1d09ada54 | 122 | uint16_t dlv; |
mbed_official | 30:91c1d09ada54 | 123 | uint8_t mv, dav; |
mbed_official | 30:91c1d09ada54 | 124 | if ((PCLK % (16 * baudrate)) != 0) { // Checking for zero remainder |
mbed_official | 51:7838415c99e7 | 125 | int err_best = baudrate, b; |
mbed_official | 51:7838415c99e7 | 126 | for (mv = 1; mv < 16 && !hit; mv++) |
mbed_official | 51:7838415c99e7 | 127 | { |
mbed_official | 51:7838415c99e7 | 128 | for (dav = 0; dav < mv; dav++) |
mbed_official | 51:7838415c99e7 | 129 | { |
mbed_official | 51:7838415c99e7 | 130 | // baudrate = PCLK / (16 * dlv * (1 + (DivAdd / Mul)) |
mbed_official | 51:7838415c99e7 | 131 | // solving for dlv, we get dlv = mul * PCLK / (16 * baudrate * (divadd + mul)) |
mbed_official | 51:7838415c99e7 | 132 | // mul has 4 bits, PCLK has 27 so we have 1 bit headroom which can be used for rounding |
mbed_official | 51:7838415c99e7 | 133 | // for many values of mul and PCLK we have 2 or more bits of headroom which can be used to improve precision |
mbed_official | 51:7838415c99e7 | 134 | // note: X / 32 doesn't round correctly. Instead, we use ((X / 16) + 1) / 2 for correct rounding |
mbed_official | 51:7838415c99e7 | 135 | |
mbed_official | 51:7838415c99e7 | 136 | if ((mv * PCLK * 2) & 0x80000000) // 1 bit headroom |
mbed_official | 51:7838415c99e7 | 137 | dlv = ((((2 * mv * PCLK) / (baudrate * (dav + mv))) / 16) + 1) / 2; |
mbed_official | 51:7838415c99e7 | 138 | else // 2 bits headroom, use more precision |
mbed_official | 51:7838415c99e7 | 139 | dlv = ((((4 * mv * PCLK) / (baudrate * (dav + mv))) / 32) + 1) / 2; |
mbed_official | 51:7838415c99e7 | 140 | |
mbed_official | 51:7838415c99e7 | 141 | // datasheet says if DLL==DLM==0, then 1 is used instead since divide by zero is ungood |
mbed_official | 51:7838415c99e7 | 142 | if (dlv == 0) |
mbed_official | 51:7838415c99e7 | 143 | dlv = 1; |
mbed_official | 51:7838415c99e7 | 144 | |
mbed_official | 51:7838415c99e7 | 145 | // datasheet says if dav > 0 then DL must be >= 2 |
mbed_official | 51:7838415c99e7 | 146 | if ((dav > 0) && (dlv < 2)) |
mbed_official | 51:7838415c99e7 | 147 | dlv = 2; |
mbed_official | 51:7838415c99e7 | 148 | |
mbed_official | 51:7838415c99e7 | 149 | // integer rearrangement of the baudrate equation (with rounding) |
mbed_official | 51:7838415c99e7 | 150 | b = ((PCLK * mv / (dlv * (dav + mv) * 8)) + 1) / 2; |
mbed_official | 51:7838415c99e7 | 151 | |
mbed_official | 51:7838415c99e7 | 152 | // check to see how we went |
mbed_official | 51:7838415c99e7 | 153 | b = abs(b - baudrate); |
mbed_official | 51:7838415c99e7 | 154 | if (b < err_best) |
mbed_official | 51:7838415c99e7 | 155 | { |
mbed_official | 51:7838415c99e7 | 156 | err_best = b; |
mbed_official | 51:7838415c99e7 | 157 | |
mbed_official | 51:7838415c99e7 | 158 | DL = dlv; |
mbed_official | 51:7838415c99e7 | 159 | MulVal = mv; |
mbed_official | 51:7838415c99e7 | 160 | DivAddVal = dav; |
mbed_official | 51:7838415c99e7 | 161 | |
mbed_official | 51:7838415c99e7 | 162 | if (b == baudrate) |
mbed_official | 51:7838415c99e7 | 163 | { |
mbed_official | 51:7838415c99e7 | 164 | hit = 1; |
mbed_official | 51:7838415c99e7 | 165 | break; |
mbed_official | 30:91c1d09ada54 | 166 | } |
mbed_official | 30:91c1d09ada54 | 167 | } |
mbed_official | 30:91c1d09ada54 | 168 | } |
mbed_official | 30:91c1d09ada54 | 169 | } |
mbed_official | 30:91c1d09ada54 | 170 | } |
mbed_official | 30:91c1d09ada54 | 171 | |
mbed_official | 30:91c1d09ada54 | 172 | // set LCR[DLAB] to enable writing to divider registers |
mbed_official | 30:91c1d09ada54 | 173 | obj->uart->LCR |= (1 << 7); |
mbed_official | 30:91c1d09ada54 | 174 | |
mbed_official | 30:91c1d09ada54 | 175 | // set divider values |
mbed_official | 30:91c1d09ada54 | 176 | obj->uart->DLM = (DL >> 8) & 0xFF; |
mbed_official | 30:91c1d09ada54 | 177 | obj->uart->DLL = (DL >> 0) & 0xFF; |
mbed_official | 30:91c1d09ada54 | 178 | obj->uart->FDR = (uint32_t) DivAddVal << 0 |
mbed_official | 30:91c1d09ada54 | 179 | | (uint32_t) MulVal << 4; |
mbed_official | 30:91c1d09ada54 | 180 | |
mbed_official | 30:91c1d09ada54 | 181 | // clear LCR[DLAB] |
mbed_official | 30:91c1d09ada54 | 182 | obj->uart->LCR &= ~(1 << 7); |
mbed_official | 30:91c1d09ada54 | 183 | } |
mbed_official | 30:91c1d09ada54 | 184 | |
mbed_official | 30:91c1d09ada54 | 185 | void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) { |
mbed_official | 30:91c1d09ada54 | 186 | // 0: 1 stop bits, 1: 2 stop bits |
mbed_official | 30:91c1d09ada54 | 187 | if (stop_bits != 1 && stop_bits != 2) { |
mbed_official | 30:91c1d09ada54 | 188 | error("Invalid stop bits specified"); |
mbed_official | 30:91c1d09ada54 | 189 | } |
mbed_official | 30:91c1d09ada54 | 190 | stop_bits -= 1; |
mbed_official | 30:91c1d09ada54 | 191 | |
mbed_official | 30:91c1d09ada54 | 192 | // 0: 5 data bits ... 3: 8 data bits |
mbed_official | 30:91c1d09ada54 | 193 | if (data_bits < 5 || data_bits > 8) { |
mbed_official | 30:91c1d09ada54 | 194 | error("Invalid number of bits (%d) in serial format, should be 5..8", data_bits); |
mbed_official | 30:91c1d09ada54 | 195 | } |
mbed_official | 30:91c1d09ada54 | 196 | data_bits -= 5; |
mbed_official | 30:91c1d09ada54 | 197 | |
mbed_official | 30:91c1d09ada54 | 198 | int parity_enable, parity_select; |
mbed_official | 30:91c1d09ada54 | 199 | switch (parity) { |
mbed_official | 30:91c1d09ada54 | 200 | case ParityNone: parity_enable = 0; parity_select = 0; break; |
mbed_official | 30:91c1d09ada54 | 201 | case ParityOdd : parity_enable = 1; parity_select = 0; break; |
mbed_official | 30:91c1d09ada54 | 202 | case ParityEven: parity_enable = 1; parity_select = 1; break; |
mbed_official | 30:91c1d09ada54 | 203 | case ParityForced1: parity_enable = 1; parity_select = 2; break; |
mbed_official | 30:91c1d09ada54 | 204 | case ParityForced0: parity_enable = 1; parity_select = 3; break; |
mbed_official | 30:91c1d09ada54 | 205 | default: |
mbed_official | 30:91c1d09ada54 | 206 | error("Invalid serial parity setting"); |
mbed_official | 30:91c1d09ada54 | 207 | return; |
mbed_official | 30:91c1d09ada54 | 208 | } |
mbed_official | 30:91c1d09ada54 | 209 | |
mbed_official | 30:91c1d09ada54 | 210 | obj->uart->LCR = data_bits << 0 |
mbed_official | 30:91c1d09ada54 | 211 | | stop_bits << 2 |
mbed_official | 30:91c1d09ada54 | 212 | | parity_enable << 3 |
mbed_official | 30:91c1d09ada54 | 213 | | parity_select << 4; |
mbed_official | 30:91c1d09ada54 | 214 | } |
mbed_official | 30:91c1d09ada54 | 215 | |
mbed_official | 30:91c1d09ada54 | 216 | /****************************************************************************** |
mbed_official | 30:91c1d09ada54 | 217 | * INTERRUPTS HANDLING |
mbed_official | 30:91c1d09ada54 | 218 | ******************************************************************************/ |
mbed_official | 30:91c1d09ada54 | 219 | static inline void uart_irq(uint32_t iir, uint32_t index) { |
mbed_official | 30:91c1d09ada54 | 220 | // [Chapter 14] LPC17xx UART0/2/3: UARTn Interrupt Handling |
mbed_official | 30:91c1d09ada54 | 221 | SerialIrq irq_type; |
mbed_official | 30:91c1d09ada54 | 222 | switch (iir) { |
mbed_official | 30:91c1d09ada54 | 223 | case 1: irq_type = TxIrq; break; |
mbed_official | 30:91c1d09ada54 | 224 | case 2: irq_type = RxIrq; break; |
mbed_official | 30:91c1d09ada54 | 225 | default: return; |
mbed_official | 30:91c1d09ada54 | 226 | } |
mbed_official | 30:91c1d09ada54 | 227 | |
mbed_official | 30:91c1d09ada54 | 228 | if (serial_irq_ids[index] != 0) |
mbed_official | 30:91c1d09ada54 | 229 | irq_handler(serial_irq_ids[index], irq_type); |
mbed_official | 30:91c1d09ada54 | 230 | } |
mbed_official | 30:91c1d09ada54 | 231 | |
mbed_official | 30:91c1d09ada54 | 232 | void uart0_irq() {uart_irq((LPC_UART->IIR >> 1) & 0x7, 0);} |
mbed_official | 30:91c1d09ada54 | 233 | |
mbed_official | 30:91c1d09ada54 | 234 | void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) { |
mbed_official | 30:91c1d09ada54 | 235 | irq_handler = handler; |
mbed_official | 30:91c1d09ada54 | 236 | serial_irq_ids[obj->index] = id; |
mbed_official | 30:91c1d09ada54 | 237 | } |
mbed_official | 30:91c1d09ada54 | 238 | |
mbed_official | 30:91c1d09ada54 | 239 | void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) { |
mbed_official | 30:91c1d09ada54 | 240 | IRQn_Type irq_n = (IRQn_Type)0; |
mbed_official | 30:91c1d09ada54 | 241 | uint32_t vector = 0; |
mbed_official | 30:91c1d09ada54 | 242 | switch ((int)obj->uart) { |
mbed_official | 30:91c1d09ada54 | 243 | case UART_0: |
mbed_official | 30:91c1d09ada54 | 244 | irq_n=UART_IRQn; |
mbed_official | 30:91c1d09ada54 | 245 | vector = (uint32_t)&uart0_irq; |
mbed_official | 30:91c1d09ada54 | 246 | break; |
mbed_official | 30:91c1d09ada54 | 247 | default: |
mbed_official | 30:91c1d09ada54 | 248 | return; |
mbed_official | 30:91c1d09ada54 | 249 | } |
mbed_official | 30:91c1d09ada54 | 250 | |
mbed_official | 30:91c1d09ada54 | 251 | if (enable) { |
mbed_official | 30:91c1d09ada54 | 252 | obj->uart->IER |= 1 << irq; |
mbed_official | 30:91c1d09ada54 | 253 | NVIC_SetVector(irq_n, vector); |
mbed_official | 30:91c1d09ada54 | 254 | NVIC_EnableIRQ(irq_n); |
mbed_official | 30:91c1d09ada54 | 255 | } else { // disable |
mbed_official | 30:91c1d09ada54 | 256 | int all_disabled = 0; |
mbed_official | 30:91c1d09ada54 | 257 | SerialIrq other_irq = (irq == RxIrq) ? (TxIrq) : (RxIrq); |
mbed_official | 30:91c1d09ada54 | 258 | |
mbed_official | 30:91c1d09ada54 | 259 | obj->uart->IER &= ~(1 << irq); |
mbed_official | 30:91c1d09ada54 | 260 | all_disabled = (obj->uart->IER & (1 << other_irq)) == 0; |
mbed_official | 30:91c1d09ada54 | 261 | |
mbed_official | 30:91c1d09ada54 | 262 | if (all_disabled) |
mbed_official | 30:91c1d09ada54 | 263 | NVIC_DisableIRQ(irq_n); |
mbed_official | 30:91c1d09ada54 | 264 | } |
mbed_official | 30:91c1d09ada54 | 265 | } |
mbed_official | 30:91c1d09ada54 | 266 | |
mbed_official | 30:91c1d09ada54 | 267 | /****************************************************************************** |
mbed_official | 30:91c1d09ada54 | 268 | * READ/WRITE |
mbed_official | 30:91c1d09ada54 | 269 | ******************************************************************************/ |
mbed_official | 30:91c1d09ada54 | 270 | int serial_getc(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 271 | while (!serial_readable(obj)); |
mbed_official | 30:91c1d09ada54 | 272 | return obj->uart->RBR; |
mbed_official | 30:91c1d09ada54 | 273 | } |
mbed_official | 30:91c1d09ada54 | 274 | |
mbed_official | 30:91c1d09ada54 | 275 | void serial_putc(serial_t *obj, int c) { |
mbed_official | 30:91c1d09ada54 | 276 | while (!serial_writable(obj)); |
mbed_official | 30:91c1d09ada54 | 277 | obj->uart->THR = c; |
mbed_official | 30:91c1d09ada54 | 278 | } |
mbed_official | 30:91c1d09ada54 | 279 | |
mbed_official | 30:91c1d09ada54 | 280 | int serial_readable(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 281 | return obj->uart->LSR & 0x01; |
mbed_official | 30:91c1d09ada54 | 282 | } |
mbed_official | 30:91c1d09ada54 | 283 | |
mbed_official | 30:91c1d09ada54 | 284 | int serial_writable(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 285 | return obj->uart->LSR & 0x20; |
mbed_official | 30:91c1d09ada54 | 286 | } |
mbed_official | 30:91c1d09ada54 | 287 | |
mbed_official | 30:91c1d09ada54 | 288 | void serial_clear(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 289 | obj->uart->FCR = 1 << 1 // rx FIFO reset |
mbed_official | 30:91c1d09ada54 | 290 | | 1 << 2 // tx FIFO reset |
mbed_official | 30:91c1d09ada54 | 291 | | 0 << 6; // interrupt depth |
mbed_official | 30:91c1d09ada54 | 292 | } |
mbed_official | 30:91c1d09ada54 | 293 | |
mbed_official | 30:91c1d09ada54 | 294 | void serial_pinout_tx(PinName tx) { |
mbed_official | 30:91c1d09ada54 | 295 | pinmap_pinout(tx, PinMap_UART_TX); |
mbed_official | 30:91c1d09ada54 | 296 | } |
mbed_official | 30:91c1d09ada54 | 297 | |
mbed_official | 30:91c1d09ada54 | 298 | void serial_break_clear(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 299 | obj->uart->LCR &= ~(1 << 6); |
mbed_official | 30:91c1d09ada54 | 300 | } |
mbed_official | 30:91c1d09ada54 | 301 | |
mbed_official | 30:91c1d09ada54 | 302 | void serial_break_set(serial_t *obj) { |
mbed_official | 30:91c1d09ada54 | 303 | obj->uart->LCR |= 1 << 6; |
mbed_official | 30:91c1d09ada54 | 304 | } |